Effect of grain size on cyclic microplasticity of ECAP processed commercial pure magnesium
Source abstract
Abstract
Equal channel angular pressing (ECAP) was performed on the extruded commercial pure magnesium at 250 °C for 4 passes. Heat treatments were carried out to modify the microstructures. The cyclic plastic deformation behavior of pure Mg with different grain sizes in microstrain region was studied by tensile loading and unloading experiments. The microplastic deformation process of pure Mg can be divided into two stages. In the first stage, pronounced plastic deformation associated with dislocation motion on basal plane is initiated at several MPa. The materials are softened and characterized by low friction stresses and hardening exponents. The microplastic deformation enters into region II above the strain of about 8 × 10−4. Annihilation and tangle of dislocations lead to the increase of hardening exponents and friction stresses. Pure Mg shows a very pronounced anelastic behavior during cyclic microplastic deformation, which results in a rapid increase of modulus defect, effectively decreasing the elastic modulus by up to 60 %. Grain size has a marked effect on microplastic deformation behavior of pure Mg. With increasing the grain size, the specimen shows a more pronounced microstrain and anelastic behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Yin SM, Yang HJ, Li SX, Wu SD, Yang F (2008) Scripta Mater 58:75110.1016/j.scriptamat.2007.12.020 ↗
2. Li Q, Yu Q, Zhang J, Jiang Y (2010) Scripta Mater 62:77810.1016/j.scriptamat.2010.01.052 ↗
3. Mughrabi H, Hoppel HW, Kautz M (2004) Scripta Mater 51:80710.1016/j.scriptamat.2004.05.012 ↗
4. Marschall CW, Maringer RE (1997) Dimensional instability-an introduction. Pergamon press, Oxford
5. Zhang F, Sun P, Li X, Zhang G (2001) Mater Lett 49:6910.1016/S0167-577X(00)00344-X ↗
6. Puškár A (2001) Internal friction of materials. Cambridge International Science Publishing, Cambrigde
7. Peguin P, Perez J, Gobin P (1967) Trans Metal Soc AIME 239:438
8. Roberts JM, Brown N (1960) Trans Metall Soc AIME 218:454
9. Thomas DA, Averbach BL (1959) Acta Metall 7:6910.1016/0001-6160(59)90110-5 ↗
10. Brown N, Lukens KF (1961) Acta Metall 9:10610.1016/0001-6160(61)90053-0 ↗
11. Adrien J, Maire E, Estevez R, Ehrstrom JC, Warner T (2004) Acta Mater 52:165310.1016/j.actamat.2003.12.009 ↗
12. Koike J, Kobayashi T, Mukai T, Watanabe H, Suzuki M, Maruyama K, Higashi K (2003) Acta Mater 51:205510.1016/S1359-6454(03)00005-3 ↗
13. Lee RE, Jones WJD (1974) J Mater Sci 9:46910.1007/BF00737849 ↗
14. Lamark TT, Hellmig RJ, Estrin Y (2006) Mater Sci Forum 503–504:88910.4028/www.scientific.net/MSF.503-504.889 ↗
15. Seregin GV, Efimenko LL, Leonov MV (1995) Met Sci Heat Treat 37:7010.1007/BF01157048 ↗
16. Agnew SR, Brown DW, Tom CN (2006) Acta Mater 54:484110.1016/j.actamat.2006.06.020 ↗
17. Muránsky O, Barnett MR, Carr DG, Vogel SC, Oliver EC (2010) Acta Mater 58:150310.1016/j.actamat.2009.10.057 ↗
18. Raeisinia B, Agnew SR, Akhtar A (2011) Metall Mater Trans A 42:141810.1007/s11661-010-0527-5 ↗
19. Ca′ceres CH, Sumitomo T, Veidt M (2003) Acta Mater 51:621110.1016/S1359-6454(03)00444-0 ↗
20. Mann GE, Sumitomo T, Caceres CH, Griffiths JR (2007) Mater Sci Eng A 456:13810.1016/j.msea.2006.11.160 ↗
21. Zhou AG, Barsoum MW (2009) Metall Mater Trans A 40A:174110.1007/s11661-009-9845-x ↗
22. Koike J (2005) Metall Mater Trans A 36:168910.1007/s11661-005-0032-4 ↗
23. Muránsky O, Carr DG, Barnett MR, Oliver EC, Sittner P (2008) Mater Sci Eng A 496:1410.1016/j.msea.2008.07.031 ↗
24. Roberts JM, Hartman DE (1964) Trans Metall Soc AIME 230:1125
25. Chun YB, Davies CHJ (2011) Mater Sci Eng A 528:348910.1016/j.msea.2011.01.046 ↗
26. Figueiredo RB, Langdon TG (2009) Mater Sci Eng A 501:10510.1016/j.msea.2008.09.058 ↗
27. Kim WJ, Hong SI, Kim YS, Min SH, Jeong HT, Lee JD (2003) Acta Mater 51:329310.1016/S1359-6454(03)00161-7 ↗
28. Chuvil’deev VN, Nieh TG, Gryaznov MY, Kopylov VI, Sysoev AN (2004) J Alloys Compd 378:25310.1016/j.jallcom.2003.10.062 ↗
29. Fan GD, Zheng MY, Hu XS, Chang H, Wu K (2009) Int J Mod Phys B 23:182910.1142/S021797920906169X ↗
30. Armas AF, Hereñú S, Bolmaro R, Alvarez-Armas I (2004) Rev Mater 9:280
31. Granato A, Lücke K (1956) J Appl Phys 27:58310.1063/1.1722436 ↗
32. Obara T, Yoshinga H, Morozumi S (1973) Acta Metall 21:84510.1016/0001-6160(73)90141-7 ↗
33. Sheerly WF, Nash RR (1960) Trans Metall Soc AIME 218:416
34. Muránsky O, Carr DG, Sittner P, Oliver EC (2009) Int J Plast 25:110710.1016/j.ijplas.2008.08.002 ↗
35. Puškár A (1983) Mater Sci Eng 61:11110.1016/0025-5416(83)90192-1 ↗
36. Jain A, Duygulu O, Brown DW, Tom CN, Agnew SR (2008) Mater Sci Eng A 486:54510.1016/j.msea.2007.09.069 ↗