journal article·2005-08Open access

A stochastic model of damage accumulation in complex microstructures

Valeria Cannillo, W. Craig Carter

Journal of Materials Science· Volume 40· Issue 15

Abstract

A statistical approach for modeling fracture in brittle materials is presented. In particular, a microstructural-based finite element code called OOF is used in conjunction with a stochastic representation of failure that relies on the Weibull law. The OOF code, which maps materials microstructures onto finite element meshes, enables to calculate the local stress states; these stresses are used along with the statistical criterion for brittle fracture in order to determine microcrack formation and propagation. Computer simulations are performed on several microstructures of different materials types, e.g., laminates, particulate composites and polycrystals. The damage accumulation due to microcracking is characterized by the stereological measure of failed material and is investigated in order to assess the effect of microstructural features on the failure mechanism. Moreover, the approach allows to analyze the influence of the characteristic parameters for brittle materials on damage evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. W. C. CARTER, S. A. LANGER and E. R. FULLER, The OOF manual: version 1.0 (1998).10.6028/NIST.IR.6256 ↗
2. K. H. LEE, S. MOORTHY and S. GHOSH, Multiple scale computation model in composite materials. Comput. Meth. Appl. Mech. Engng. 172 (1999) 175.10.1016/S0045-7825(98)00229-1 ↗
3. K. LEE and S. GHOSH, A microstructure based numerical method for constitutive modeling of composite and porous materials. Mater. Sci.Engng. A 272 (1999) 120.10.1016/S0921-5093(99)00475-X ↗
4. Idem. Small deformation multi-scale analysis of heterogeneous materials with the Voronoi cell finite element model and homogenization theory. Comput. Mater. Sci. 7 (1996) 131.10.1016/S0927-0256(96)00072-9 ↗
5. S. GHOSH, K. LEE and P. RAGHAVAN, A multi-level computational model for multi-scale damage anlysis in composite and porous materials. Int. J. Sol. Struct. 38 (2001) 2335.10.1016/S0020-7683(00)00167-0 ↗
6. S. MOORTHY and S. GHOSH, Particle cracking in discretely reinforced materials with the Voronoi cell finite element model. Int. J. Plast. 14 (1998) 805.10.1016/S0749-6419(98)00024-2 ↗
7. S. GHOSH and S. MOORTHY, Particle fracture simulation in non-uniform microstructures of metal matrix composites. Acta Mater. 46 (1998) 965.10.1016/S1359-6454(97)00289-9 ↗
8. S. GHOSH, M. LI, S. MOORTHY and K. LEE, Microstructural characterization, meso-scale modeling and multiple-scale analysis of discretely reinforced materials. Mater. Sci. Engng. A 249 (1998) 62.10.1016/S0921-5093(98)00564-4 ↗
9. M. LI, S. GHOSH and O. RICHMOND, An experimental-computational approach to the investigation of damage evolution in discountinuously reinforced aluminum matrix composite. Acta Mater. 47 (1999) 3515.10.1016/S1359-6454(99)00148-2 ↗
10. M. LI, S. GHOSH, O. RICHMOND, H. WEILAND and T. N. ROUNS, Three dimensional characterization and modeling of particle reinforced metal matrix composites: part I quantitative description of microstructural morphology. Mater. Sci. Engng. A 265 (1999) 153.10.1016/S0921-5093(98)01132-0 ↗
11. Idem., Three dimensional characterization and modeling of particle reinforced metal matrix composites: Part II damage characterization. ibid. 266 (1999) 221.10.1016/S0921-5093(98)01133-2 ↗
12. P. D. ZAVATTIERI, P. V. RAGHURAM and H. D. ESPINOSA, A computational model of ceramic microstructures subjected to multiaxial dynamic loading. J. Mech. Phys. Sol. 49 (2001) 27.10.1016/S0022-5096(00)00028-4 ↗
13. A. ZHAO and J. YU, The overall elastic moduli of orthotropic composite and description of orthotropic damage of materials. Int. J. Sol. Struct. 37 (2000) 6755.10.1016/S0020-7683(99)00226-7 ↗
14. A. C. FISCHER-CRIPPS, A “partitioned problem” approach to microstructural modeling of a glass-ceramic. J. Amer. Ceram. Soci. 82 (1999) 1835.10.1111/j.1151-2916.1999.tb02006.x ↗
15. J. FITOUSSI, G. GUO and D. BAPTISTE, A statistical micromechanical model of anisotropic damage for S.M.C. composites. Compos. Sci. Tech. 58 (1998) 759.10.1016/S0266-3538(97)00163-2 ↗
16. C. M. LANDIS, I. J. BEYERLEIN and M. MCMEEKING, Micromechanical simulation of failure of fiber reinforced composites. J. Mech. Phys. Sol. 48 (2000) 621.10.1016/S0022-5096(99)00051-4 ↗
17. V. CANNILLO and W. C. CARTER, Computation and simulation of reliability parameters and their variations in heterogeneous materials. Acta Mater. 48 (2000) 3593.10.1016/S1359-6454(00)00089-6 ↗
18. C.-H. HSUEH, J. A. HAYNES, M. J. LANCE, P. F. BECHER, M. K. FERBER, E. R. FULLER JR., S. A. LANGER, W. C. CARTER and W. R. CANNON, Effects of interface roughness on residual stresses in thermal barrier coatings. J. Amer. Ceram. Soci. 82 (1999) 1073.10.1111/j.1151-2916.1999.tb01878.x ↗
19. C.-H. HSUEH and E. R. FULLER JR., Residual stresses in thermal barrier coatings: Effects of inteface asperity curvature/height and oxide thickness. Mater. Sci. Engng. A 283 (2000) 46.10.1016/S0921-5093(00)00743-7 ↗
20. A. SAIGAL, E. R. FULLER JR., S.A LANGER, W.C. CARTER, M.H. ZIMMERMANN and K. T. FABER, Effect of interface properties on microcracking of iron titanate. Scripta Materialia, 38 (1998) 1449.10.1016/S1359-6462(98)00040-2 ↗
21. A. SAIGAL and E. R. FULLER JR, Analysis of stresses in aluminum-silicon alloys. Comput. Mater. Sci. 21 (2001) 149.10.1016/S0927-0256(00)00224-X ↗
22. A. ZIMMERRMANN, E. R. FULLER JR. and J. ROEDEL, Residual stress distributions in ceramics. Journal of the American Ceramic Society, 82:3155–3160, 1999.10.1111/j.1151-2916.1999.tb02217.x ↗
23. A. ZIMMERMANN, D. M. BASKIN, K. T. FABER, E. R. FULLER JR., A. J. ALLEN and D. T. KEANE, Fracture of a textured anisotropic ceramic. Acta Mater. 49 (2001) 3231.10.1016/S1359-6454(01)00224-5 ↗
24. V. R. VEDULA, S. J. GLASS, D. M. SAYLOR, G. S. ROHRER, W. C. CARTER, S. A. LANGER and E. R. FULLER, Residual-stress prediction in polycristalline alumina. J. Am. Ceram. Soc. 84 (2001) 2947.10.1111/j.1151-2916.2001.tb01119.x ↗
25. C.-H. HSUEH, E. R. FULLER JR., S. A. LANGER and W. C. CARTER. Analytical and numerical analyses for two-dimensional stress transfer. Mater. Sci. Engng. A 268 (1999) 1.10.1016/S0921-5093(99)00129-X ↗
26. V. CANNILLO, C. LEONELLI and A. R. BOCCACCINI, Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites. ibid. 323 (2002) 246.10.1016/S0921-5093(01)01345-4 ↗
27. V. CANNILLO, G. C. PELLACANI, C. LEONELLI and A. R. BOCCACCINI, Numerical modeling of the fracture behavior of a glass matrix composite reinforced with alumina platelets. Composites A 34 (2003) 43.10.1016/S1359-835X(02)00230-0 ↗
28. V. CANNILLO, A. CORRADI, C. LEONELLI and A. R. BOCCACCINI, A simple approach for determining the “in- situ” fracture toughness of ceramic platelets used in composite materials by numerical simulations. J. Mater. Sci. Lett. 20 (2001) 1889.10.1023/A:1012870110675 ↗
29. A. ZIMMERMANN, W. C. CARTER and E. R. FULLER JR., Damage evolution during microcracking of brittle solids. Acta Mater. 49 (2001) 127.10.1016/S1359-6454(00)00294-9 ↗
30. W. WEIBULL, A statistical distribution function of wide applicability. J. Appl. Mech. 18 (1951) 293.10.1115/1.4010337 ↗
31. Y. XU, L. CHENG, L. ZHANG, H. YIN and X. YIN, Mechanical properties of 3D fiber reinforced C/SiC composites. Mater. Sci. Engng. A 300 (2001) 196.10.1016/S0921-5093(00)01533-1 ↗
32. C. DENOUAL and F. HILD, A damage model for the dynamic fragmentation of brittle solids. Comput. Meth. Appl. Mech. Engng. 183 (2000) 247.10.1016/S0045-7825(99)00221-2 ↗
33. R. DANZER, F. D. FISCHER and W.-Y. YAN, Application of probabilistic fracture mechanics to a dynamic loading situation using the example of a dynamic tension test for ceramics. J. Eur. Ceram. Soc. 20 (2000) 901.10.1016/S0955-2219(99)00219-8 ↗
34. M. K. CATTEL and K. A. KIBBLE, Determination of the relationship between strength and test method for glass fibre epoxy composite coupons using Weibull analysis. Mater. Des. 22 (2001) 245.10.1016/S0261-3069(00)00096-0 ↗
35. Z. XIA and W. A. CURTIN, Tough-to-brittle transitions in ceramic-matrix composites with increasing interfacial shear stress. Acta Mater. 48 (2000) 4879.10.1016/S1359-6454(00)00291-3 ↗
36. P. D. WARREN, Fracture of brittle materials: effects of test method and threshold stresson the Weibull modulus. J. Eur. Ceram. Soc. 21 (2001) 335–342.10.1016/S0955-2219(00)00183-7 ↗
37. A. TABIEI and J. SUN, Analytical simulation of strength size effect in composite materials. Composit. Part B: Engng. 31 (2000) 133.10.1016/S1359-8368(99)00074-8 ↗
38. J. LLORCA and C. GONZALEZ, Microstructural factors controlling the strength and ductility of particle-reinforced metal-matrix composites. J. Mech. Phys. Sol. 46 (1998) 1.10.1016/S0022-5096(97)00038-0 ↗
39. V. CANNILLO and W. C. CARTER, Stochastic modeling of the mechanical behavior and reliability of brittle or moderately damage-tolerant materials. Computational Modeling and Simulation of Materials II, edited by P. Vincenzini and A. Lami, in Advances in Science and Technology 36 (2003) 173.
40. X. Z. ZHANG and J. F. KNOTT, The statistical modelling of brittle fracture in homogeneous and heterogeneous steel microstructures. Acta Mater. 48 (2000) 2135.10.1016/S1359-6454(00)00055-0 ↗
41. Z. XIA, W. A. CURTIN and P. W. M. PETERS, Multiscale modeling of failure in metal matrix composites. Acta Mater. 49 (2001) 273.10.1016/S1359-6454(00)00317-7 ↗
42. I. SEVOSTIANOV and M. KACHANOV, Modeling of the anisotropic elastic properties of plasma-sprayed coatings in relation to their microstructure. Acta Mater. 48 (2000) 1361.10.1016/S1359-6454(99)00384-5 ↗
43. I. SEVOSTIANOV, V. VERIJENKO and M. KACHANOV, Cross-property correlations for short fiber reinforced composites with damage and their experimental verification. Compos.: Part B, 33 (2002) 205.10.1016/S1359-8368(02)00008-2 ↗
44. P. LADEVEZE, O. ALLIX, J.F. DEU and D. LEVEQUE, A mesomodel for localisation and damage computation in laminates. Comput. Meth. Appl. Mech. Engrg. 183 (2000) 105.10.1016/S0045-7825(99)00214-5 ↗
45. P. LADEVEZE and A. NOUY, On a multiscale computational strategy with time and space homogenization for structural mechanics. Comput. Meth. Appl. Mech. Engrg. 192 (2003) 3061.10.1016/S0045-7825(03)00341-4 ↗
46. P. LADEVEZE and G. LUBINEAU, On a damage mesomodel for laminates: micromechanics basis and improvement. Mech. Mater. 35 (2003) 763.10.1016/S0167-6636(02)00204-1 ↗
47. S. NEMAT-NASSER and M. HORI, “Micromechanics: Overall Properties of Heterogeneous Materials” (North Holland, 1999).