Cutting characteristics of beard hair
Source abstract
Abstract
The cutting behaviour of beard hair has been investigated quantitatively and qualitatively. High speed cutting tests were conducted on beard hair samples using a purpose built cutting rig (provided by Gillette, UK) to determine the cutting forces. High speed digital video photography was used to record the cutting process. In parallel with these tests, low speed cutting tests were undertaken within a scanning electron microscope (SEM) to gain a better understanding of the cutting process. Results from the high speed cutting tests showed that the peak cutting stresses are influenced strongly by moisture (the cutting stress for ‘wet’ samples is reduced by about 30% as compared to dry samples) while the effects on the cutting stress of other variables (subject age, blade approach angle and sample ageing due to prolonged storage) appeared to be less noticeable. The angle of cut was affected by the distance of the initial contact point (between the hair and the blade) from the base of the hair with the line of cut shifting towards the hair axis with increasing distance from the base. Qualitative observations from video-recordings and still images taken during the cutting tests, conducted in-situ within the SEM as well as the high speed cutting rig, showed four main cutting mechanisms of hair, which are documented in this paper. The distance from the initial contact point to the base of the hair and the moisture level were the parameters which controlled the mechanism of failure. Qualitative observations of the sort reported here are a necessary pre-cursor to the development of finite element models to simulate a cutting operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Dyeing and Modifying Textile Fibers · Silk-based biomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Thozhur SM, Crocombe AD, Smith PA, Mullier M, Cowley K (2006) J Mat Sci 41(4):110910.1007/s10853-005-3648-2 ↗
2. Dawber RPR (1986) Bioeng Skin 2:1
3. Dawber R (1996) Clin Dermatol 14:10510.1016/0738-081X(95)00117-X ↗
4. Jones LN (2001) Clin Dermatol 19:9510.1016/S0738-081X(00)00120-6 ↗
5. Swift JA (1991) Intl J Cosmet Sci 13:14310.1111/j.1467-2494.1991.tb00558.x ↗
6. Swift JA (1997) AIM J EXS 78:149
7. Watanabe H, Yahagi K. (1992) Jpn J Tribol 37(4):427
8. Feughelman M (1997) Cosmet Sci Technol Ser 17:1
9. Feughelman M (1982) J Soc Cosmet Chem 33:385
10. Sakai M, Nagase S, Okada T, Satoh N, Tsujii K (2000) Bull Chem Soc Jpn 73:216910.1246/bcsj.73.2169 ↗
11. Feughelman M (1964) Textile Res J 34:53910.1177/004051756403400609 ↗
12. Feughelman M (1994) Textile Res J 64(4):23610.1177/004051759406400408 ↗
13. Deem D, Rieger MM (1976) J Soc Cosmet Chem 27:579
14. Trusty PA (1994) PhD thesis (University of Surrey)