journal article·2005-12

Morphologies and properties of NiO particles prepared from NiSO4·6H2O and Ni(NO3)2·6H2O by spray pyrolysis

Dong-Jun Kang, Kyung-Nam Kim, Sun-Geon Kim

Journal of Materials Science· Volume 40· Issue 23
Publisher page

Abstract

Nickel oxide particles were prepared by spray pyrolysis of aqueous solutions of NiSO4·6H2O and Ni(NO3)2·6H2O. In spray pyrolysis reactor hollow salt particles initially formed were collapsed by decomposition to reduce their size. For NiSO4·6H2O less hollowness of the primitive particles and its higher decomposition temperature made the oxide particles highly spherical with very smooth surface. On the other hand the particles prepared from Ni(NO3)2·6H2O were so hollow and fragile with rough surface since they were formed on the liquid pool of the salt melt. The particle size decreased with the furnace set temperature while increased with the initial salt concentration. Single oxide particle was composed of many small nuclei without sintering whose size varied with the rate of decomposition. The crystallinity of the particles increased with both temperature and the initial salt concentration. Preliminary drying in diffusion dryer fixed the size of the oxide particles from NiSO4·6H2O at that of the primitive particles, independent of the temperature. However, by the preliminary drying the particles from Ni(NO3)2·6H2O became more hollow and fragile, whose sizes decreased with the temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. K. NAGASHIMA, M. WADA and A. KATO, J. Mater. Res. 5 (1990) 2828.10.1557/JMR.1990.2828 ↗
2. S. STOVIC, I. ILIC and D. USKOKOVIC, Mater. Lett. 24 (1995) 369.10.1016/0167-577X(95)00121-2 ↗
3. S. L. CHE, K. TAKADA, K. TAKASHIMA, O. SAKURAI, K. SHINOZAKI and N. MIZUTANI J. Mater. Sci. 34 (1999) 1313.10.1023/A:1004546014867 ↗
4. W.-N. WANG, Y. ITOH I. W. LEGGORO and K. OKUYAMA, Mater. Sci. Engng. B 111 (2004) 69.10.1016/j.mseb.2004.03.024 ↗
5. T. ADDONA, P. AUGER, C. CELIK and G. CHEN, Pass. Comp. Ind. (1999) Nov./Dec., 14.
6. D. J. KANG, H. S. KIM and S. G. KIM, J. Mater. Sci. (2003) Submitted.
7. G. V. JAYANTHI, S. C. ZHANG and G. L. MESSING, Aerosol Sci. Technol. 19 (1993) 478.10.1080/02786829308959653 ↗
8. H.-F. YU and W.-H. LIAO, Int. J. Heat Mass. Transf. 41 (1998) 993.10.1016/S0017-9310(97)00226-3 ↗
9. I. W. LENGGORO, T. HATA, F. ISKANDAR, M. M. LUNDEN and K. OKUYAMA, J. Mater. Res. 15 (2000) 733.10.1557/JMR.2000.0106 ↗
10. R. H. PERRY and D. W. GREEN, in ``Perry's Chemical Engineer's Handbook'', 7th edn. (McGraw-Hill, 1997).
11. S. JAIN, D. J. SKAMSER and T. T. KODAS, Aerosol Sci. Technol. 27 (1997) 575, J. Mater. Sci. 34 (1999) 1313.10.1023/A:1004546014867 ↗