Applicability of empirical models for evaluation of stress ratio effect on the durability of fiber-reinforced creep rupture–susceptible composites
Source abstract
Abstract
Fiber-reinforced polymer–matrix composites are known to exhibit loading rate- and time-dependent mechanical response. Their fatigue strength is determined by a complex interaction of damage processes governed by loading duration and cycle number. Apart from mechanistic approaches, a number of empirical models of various sophistication have been proposed to predict the durability of composites, differing in the amount of experimental data needed for their application. The accuracy of several such models is evaluated by comparing the prediction to the experimentally determined stress ratio effect on fatigue life of glass fiber-reinforced polyester–matrix composite. It is found that the accuracy of prediction generally improves with increasing the amount of test data needed for model calibration. However, the most accurate method of fatigue life estimation, among the selected ones, is by the modified Goodman diagram.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Brinson LC, Gates TS (2000) In: Comprehensive composite materials, vol 2. Elsevier Science Ltd, New York, p 333
2. Guedes RM (2007) Compos Sci Technol 67:257410.1016/j.compscitech.2006.12.004 ↗
3. Talreja R (2000) In: Comprehensive composite materials, vol 2. Elsevier Science Ltd, New York, p 529
4. Harris B, Gathercole N, Lee JA, Reiter H, Adam T (1997) Philos Trans R Soc Lond A 355:125910.1098/rsta.1997.0055 ↗
5. Harris B, Carroll HE, Davies AJ (2003) Adv Compos Lett 12:710.1177/096369350301200101 ↗
6. Kawai M, Koizumi M (2007) Compos Part A 38:234210.1016/j.compositesa.2007.01.016 ↗
7. Golub VP, Pogrebniak AD, Kochetkova ES (2008) Mech Compos Mater 44:6510.1007/s11029-008-0008-8 ↗
8. Vassilopoulos AP, Manshadi BD, Keller T (2010) Int J Fatigue 32:65910.1016/j.ijfatigue.2009.09.008 ↗
9. Andersons J (1993) Mech Compos Mater 29:54510.1007/BF00616318 ↗
10. Degrieck J, Van Paepegem W (2001) Appl Mech Rev 54:27910.1115/1.1381395 ↗
11. Post NL, Case SW, Lesko JJ (2008) Int J Fatigue 30:206410.1016/j.ijfatigue.2008.07.002 ↗
12. Passipoularidis VA, Philippidis TP (2009) Int J Fatigue 31:40810.1016/j.ijfatigue.2008.07.010 ↗
13. Quaresimin M, Susmel L, Talreja R (2010) Int J Fatigue 32:210.1016/j.ijfatigue.2009.02.012 ↗
14. Tamužs V, Andersons J, Aniskevich K, Jansons J, Korsgaard J (1998) Mech Compos Mater 34:32110.1007/BF02257900 ↗
15. Andersons J, Korsgaard J (1999) Mech Compos Mater 35:39510.1007/BF02329325 ↗
16. Andersons J, Grušeckis I, Korsgaard J (1999) Mech Compos Mater 35:46110.1007/BF02259467 ↗
17. Andersons J, Korsgaard J (1997) The effect of stress ratio on durability and damage accumulation in GRP at uniaxial loading. In: Proceedings of international conference on fatigue composites, Paris, p 315
18. Kassapoglou C (2007) J Compos Mater 41:273710.1177/0021998307078735 ↗
19. Kassapoglou C (2010) J Compos Mater. doi: 10.1177/002199830810435710.1177/0021998308104357 ↗
20. Conle A, Ingall JP (1985) J Compos Technol Res 7:310.1520/CTR10286J ↗
21. Nasr M, Abouelwafa MN, Gomaa A, Hamdy A, Morsi E (2005) J Compos Mater 39:128310.1177/0021998305050424 ↗
22. Ellyin F, El Kadi H (1990) Compos Struct 15:6110.1016/0263-8223(90)90081-O ↗
23. El Kadi H, Ellyin F (1994) Composite 25:91710.1016/0010-4361(94)90107-4 ↗
24. Petermann J, Plumtree A (2001) Compos Part A 32:10710.1016/S1359-835X(00)00099-3 ↗
25. Shokrieh MM, Taheri-Behrooz F (2006) Compos Struct 75:44410.1016/j.compstruct.2006.04.041 ↗
26. Sendeckyj GP (2001) Int J Fatigue 23:34710.1016/S0142-1123(00)00077-3 ↗
27. Owen MJ (1970) Composite 1:34610.1016/0010-4361(70)90233-8 ↗
28. Epaarachchi JA (2006) Compos Struct 74:41910.1016/j.compstruct.2005.04.022 ↗
29. Loverich JS, Russell BE, Case SW, Reifsnider KL (2000) In: Schapery RA, Sun CT (eds) Time dependent and nonlinear effects in polymers and composites. ASTM STP 1357, p 310
30. Brøndsted P, Andersen SI, Lilholt H (1996) Mech Compos Mater 32:2110.1007/BF02254644 ↗
31. Oldyrev PP (1984) Mech Compos Mater 20:59110.1007/BF00610608 ↗
32. Rotem A, Nelson HG (1989) Compos Sci Technol 36:4510.1016/0266-3538(89)90015-8 ↗
33. Limonov VA, Anderson YaA (1991) Mech Compos Mater 27:27610.1007/BF00616875 ↗
34. Miyano Y, Nakada M, Muki R (1999) Mech Time Depend Mater 3:14110.1023/A:1009873124095 ↗
35. Miyano Y, Nakada M, Kudoh H, Muki R (2000) J Compos Mater 34:53810.1106/KXEJ-9MLK-TEY3-EUG3 ↗
36. Kim RY (1990) Effect of mean stresses on fatigue behavior of composite laminates. In: Proceedings of 7th international conference on composite materials, vol 2, p 621
37. Caprino G, Giorleo G (1999) Compos Part A 30:29910.1016/S1359-835X(98)00124-9 ↗
38. Caprino G (2000) J Compos Mater 34:133410.1106/BDFK-PMJV-2N2G-6589 ↗
39. Epaarachchi JA, Clausen PD (2003) Compos Part A 34:31310.1016/S1359-835X(03)00052-6 ↗
40. Reifsnider K, Case S, Duthoit J (2000) Compos Sci Technol 60:253910.1016/S0266-3538(00)00047-6 ↗
41. Reifsnider KL (1986) Eng Fract Mech 25:73910.1016/0013-7944(86)90037-8 ↗
42. Guedes RM (2009) Compos Sci Technol 69:120010.1016/j.compscitech.2009.02.021 ↗
43. Tamuzs V, Dzelzitis K, Reifsnider K (2004) Appl Compos Mater 11:28110.1023/B:ACMA.0000037131.70402.5e ↗
44. Tamuzs V, Dzelzitis K, Reifsnider K (2008) Compos Sci Technol 68:271710.1016/j.compscitech.2008.04.033 ↗
45. Oldirev PP, Parfeev VM, Komar VI (1977) Mech Polym 13:76210.1007/BF00860333 ↗