journal article·2010-12

The influence of the cooling rate on bulk metallic glass formation in Mg80Cu15Y5 and Mg80Cu10Y10

M. Regev, H. Rosenson, Z. Koren, A. Katz-Demyanetz

Journal of Materials Science· Volume 45· Issue 23
Publisher page

Abstract

The Mg–Cu–Y system is known to be one of the best glass formers among the various existing magnesium alloys. The compositions chosen for the current study were Mg80Cu15Y5 and Mg80Cu10Y10. Different casting processes yielded four different microstructures that were analyzed by means of X-ray diffraction, scanning electron microscopy, high resolution scanning electron microscopy, and energy-dispersive X-ray spectroscopy chemical analysis. The different casting procedures were gravity castings of 3 mm diameter specimens into a copper mold held at different temperatures (cooled to −195 °C with the aid of liquid nitrogen, held at room temperature and heated up to 300 °C) and melt-spinning. Detailed microstructure study was then performed on the melt-spun specimen using transmission electron microscopy and high resolution transmission electron microscopy. The above-mentioned investigation revealed a crystalline rather than amorphous structure. The observed microstructure could not be explained on the basis of current models referring to the frequency of nucleation events.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electromagnetic wave absorption materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Hong JW, Kang HS, Yoon WY, Lee SM (2007) Mater Sci Eng A 449–451:72710.1016/j.msea.2006.02.382 ↗
2. Schlorke N, Weiss B, Eckert J, Schultz L (1999) Nanostruct Mater 12:12710.1016/S0965-9773(99)00080-X ↗
3. Puech S, Blandin JJ, Soubeyoux JL (2007) Adv Eng Mater 9:76410.1002/adem.200700160 ↗
4. Kim D, Lee BL, Kim NJ (2005) Scripta Mater 52:96910.1016/j.scriptamat.2005.01.038 ↗
5. Pryds N, Eldrup M, Schrøder Pedersen A (2001) In: Proceedings of the 22nd Risø innernational symposium on materials science: science of metastable and nanocrystalline alloys structure, properties and modeling, Risø National Laboratory, Roskilde, Denmark, pp 377–382
6. Savyak M, Hirnyj S, Bauer HD, Uhlemann M, Eckert J, Schultz L, Gebert A (2004) J Alloys Compd 364:22910.1016/S0925-8388(03)00529-2 ↗
7. Satta M, Palumbo M, Rizzi P, Baricco M (2007) Adv Eng Mater 9:47510.1002/adem.200700040 ↗
8. Inoue A, Masumoto T (1993) Mater Sci Eng A 173:110.1016/0921-5093(93)90175-E ↗
9. Inoue A, Nakamura T, Nishiyama N, Masumoto T (1992) Mater Trans JIM 10:93710.2320/matertrans1989.33.937 ↗
10. Inoue A, Kato A, Zhang T, Kim SG, Masumoto T (1991) Mater Trans JIM 32:60910.2320/matertrans1989.32.609 ↗
11. Wolff U, Pryds N, Wert JA (2004) Scripta Mater 50:138510.1016/j.scriptamat.2004.02.036 ↗
12. Chen G, Ferry M (2007) J Mater Sci 42:646. doi: 10.1007/s10853-006-1140-210.1007/s10853-006-1140-2 ↗
13. Kim SG, Inoue A, Masumoto T (1990) Mater Trans JIM 31:92910.2320/matertrans1989.31.929 ↗
14. Murty BS, Hono K (2000) Mater Trans JIM 41:153810.2320/matertrans1989.41.1538 ↗
15. Ma H, Zheng Q, Xu J, Li Y, Ma E (2005) J Mater Res 20:225210.1557/jmr.2005.0307 ↗
16. Katz A, Rosenson H, Koren Z, Regev M (2009) Mater Sci Technol 25:122710.1179/174328408X374658 ↗
17. Davis JR, Allen P (1990) ASM handbook, 10th edn. ASM, USA
18. Massalski TD (1987) Binary alloy phase diagrams, 2nd printing. ASM, USA
19. Spaepen F (1989) Mater Res Soc Symp 132:12710.1557/PROC-132-127 ↗
20. Spaepen F, Turnbull D (1976) In: Grant NJ, Giessen BC (eds) Proceedings of the second international conference on rapidly-quenched metals. The Massachusetts Institute of Technology, Cambridge, USA, p 205