journal article·2011-04Open access

Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite

S. Dalle Vacche, C. J. G. Plummer, C. Houphouët-Boigny, J.-A. E. Månson

Journal of Materials Science· Volume 46· Issue 7

Abstract

Satisfactory impregnation of glass fiber mats may be obtained with isotactic polypropylene/montmorillonite (MMT) nanocomposites under conditions comparable with industrial conditions. However, it is demonstrated here that the high melt viscosity of the nanocomposite matrix at low shear rates may significantly influence the release of the compressive load in the glass mat and hence the glass fiber distribution in consolidated specimens. Thus, depending on the initial lay-up and overall glass fiber content, the bending modulus may either increase or decrease with increasing MMT content, whereas the tensile modulus is more consistent with micromechanical models assuming a uniform glass fiber distribution. Results from fractographic analyses show that the presence of matrix rich layers at the specimen surfaces may also lead to premature crack initiation and failure in flexion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Stokes VK (1995) J Eng Mater Technol 117:44810.1115/1.2804738 ↗
2. Karger-Kocsis J (2000) Polym Compos 21:51410.1002/pc.10206 ↗
3. Ericson M, Berglund L (1992) Compos Sci Technol 43:26910.1016/0266-3538(92)90098-N ↗
4. Ericson ML, Berglund LA (1993) Polym Compos 14:3510.1002/pc.750140106 ↗
5. Ericson ML, Berglund LA (1993) Compos Sci Technol 49:12110.1016/0266-3538(93)90051-H ↗
6. Lee NJ, Jang JS (1999) Composites Part A 30:81510.1016/S1359-835X(98)00185-7 ↗
7. Lee NJ, Jang JS (2000) Compos Sci Technol 60:20910.1016/S0266-3538(99)00122-0 ↗
8. Stokes VK (1990) Polym Compos 11:3210.1002/pc.750110106 ↗
9. Stokes VK (1990) Polym Compos 11:35410.1002/pc.750110609 ↗
10. Zhao RF, Zhou XD, Dai G (2002) Polym Compos 23:102610.1002/pc.10498 ↗
11. Lindhagen J, Berglund L (1998) J Appl Polym Sci 69:131910.1002/(SICI)1097-4628(19980815)69:7<1319::AID-APP6>3.0.CO;2-H ↗
12. Karger-Kocsis J, Harmia T, Czigány T (1995) Compos Sci Technol 54:28710.1016/0266-3538(95)00068-2 ↗
13. Czigany T, Marosfalvi J, Karger-Kocsis J (2000) Compos Sci Technol 60:120310.1016/S0266-3538(00)00059-2 ↗
14. Romhany G, Czigany T, Benevolenski OI, Karger-Kocsis J (2001) Adv Compos Lett 10:25710.1177/096369350101000506 ↗
15. Benevolenski OI, Karger-Kocsis J (2001) Compos Sci Technol 61:241310.1016/S0266-3538(01)00160-9 ↗
16. Benevolenski OI, Karger-Kocsis J, Czigany T, Romhany G (2003) Composites Part A 34:26710.1016/S1359-835X(02)00045-3 ↗
17. Karger-Kocsis J, Fejes-Kozma Z (1994) Mech Compos Mater 30:810.1007/BF00612728 ↗
18. Karger-Kocsis J (1994) J Mater Sci Lett 13:142210.1007/BF00405051 ↗
19. Balazs AC, Emrick T, Russell TP (2006) Science 314:110710.1126/science.1130557 ↗
20. Tjong SC (2006) Mater Sci Eng R 53:7310.1016/j.mser.2006.06.001 ↗
21. Gilman JW, Kashiwagi TJ (2000) In: Pinnavaia TJ, Beall GW (eds) Polymer-clay nanocomposites. Wiley, Chichester, UK
22. Tsai JL, Wu MD (2007) J Compos Mater 41:251310.1177/0021998307076491 ↗
23. Aktas L, Altan MC (2010) Polym Compos 31:62010.1002/pc.20837 ↗
24. Tsai JL, Kuo JC, Hsu SM (2006) Mater Sci Forum 505–507:3710.4028/www.scientific.net/MSF.505-507.37 ↗
25. Tsai JL, Kuo JC, Hsu SM (2006) J Mater Sci 41:7406. doi: 10.1007/s10853-006-0800-610.1007/s10853-006-0800-6 ↗
26. Subramaniyan AK, Sun CT (2006) Composites Part A 37:225710.1016/j.compositesa.2005.12.027 ↗
27. Norkhairunnisa M, Azhar AB, Shyang CW (2007) Polym Int 56:51210.1002/pi.2146 ↗
28. Haque A, Shamsuzzoha M, Hussain F, Dean D (2003) J Compos Mater 37:182110.1177/002199803035186 ↗
29. Hussain F, Dean D, Haque A, Shamsuzzoha AM (2005) J Adv Mater 37:16
30. Ravindran N, Cho EH (2006) J Vinyl Addit Technol 12:2510.1002/vnl.20063 ↗
31. Kornmann X, Rees M, Thomann Y, Necola A, Barbezat M, Thomann R (2005) Compos Sci Technol 65:225910.1016/j.compscitech.2005.02.006 ↗
32. Akkapeddi MK (2000) Polym Compos 21:57610.1002/pc.10213 ↗
33. Zhao R, Huang J, Bin S, Dai G (2001) J Appl Polym Sci 82:271910.1002/app.2124 ↗
34. Houphouët-Boigny C (2007) Fiber reinforced polypropylene nanocomposites. PhD Thesis, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne
35. Houphouët-Boigny C, Plummer CJG, Dalle Vacche S, Michaud V, Wakeman MD, Månson JAE (2007) J Compos Mater 44:107510.1177/0021998309344639 ↗
36. Michaud V, Tornqvist R, Månson JAE (2001) J Compos Mater 35:117410.1177/002199801772662280 ↗
37. Michaud V, Månson JAE (2001) J Compos Mater 35:115010.1177/002199801772662271 ↗
38. Houphouët-Boigny C, Plummer CJG, Wakeman MD, Månson JAE (2007) Polym Eng Sci 47:112210.1002/pen.20797 ↗
39. Gopakumar TG, Lee JA, Kontopoulou M, Parent JS (2002) Polymer 43:548310.1016/S0032-3861(02)00403-2 ↗
40. Lingaiah S, Sadler R, Ibeh C, Shivakumar K (2008) Composites Part B 39:19610.1016/j.compositesb.2007.02.027 ↗
41. Park J, Eom K, Kwon O, Woo S (2001) Microsc Microanal 7:27610.1017/S1431927601010285 ↗
42. Cox HL (1952) Br J Appl Phys 3:7210.1088/0508-3443/3/3/302 ↗
43. Krenchel H (1964) Fibre reinforcement. Akademisk Forlag, Copenhagen
44. Thomason JL, Vlug MA (1996) Composites Part A 27:47710.1016/1359-835X(95)00065-A ↗
45. Matthews FL, Rawlings RD (1995) Composite materials: engineering and science. Chapman & Hall, London
46. Li J, Ton-That MT, Leelapornpisit W, Utracki LA (2007) Polym Eng Sci 47:144710.1002/pen.20841 ↗
47. Wolfrath J, Michaud V, Månson JAE (2005) Polym Compos 26:36110.1002/pc.20110 ↗