journal article·2014-03

Anisotropy in wetting of oriented sapphire surfaces by liquid Al–Cu alloys

Julianna Schmitz, Iván Egry, Jürgen Brillo

Journal of Materials Science· Volume 49· Issue 5
Publisher page

Abstract

The coexistence of a liquid with a solid and a gas phase causes a contact angle at the triple line and results in a certain work of adhesion. These properties were studied for liquid Al, Cu, and their alloys on single-crystalline sapphire surfaces with C(0001)-, A(11-20)-, and R(1-102)- orientation. Measurements were performed at 1100 °C and under $$3 \cdot 10^4\, \hbox{Pa}$$ Ar atmosphere in a sessile drop apparatus. There, the sample was heated and melted separately from the substrate within a drop dispenser. Only after the desired measurement conditions were reached, the liquid metal was released. Depending on the alloy composition, the wetting angle approached a constant value within few minutes after the contact of droplet and substrate was established: For pure Cu the contact angle increased to an equilibrium value of 116° ± 5°, which is identical for all the studied sapphire surfaces. For pure Al an anisotropy of the contact angle with regard to these surfaces is found: time evolution of the Al contact angle is only observed for wetting of C-surfaces. Wetting of A- and R-surfaces shows no pronounced time dependence. In these cases, a smaller contact angle of about 90° is observed. Wetting of the different sapphire surfaces by Al–Cu alloys corresponds qualitatively to their wetting by pure Al: again, only for C-surfaces a time-dependent increase of the contact angle is observed. On A- and R-surfaces wetting is not time-dependent and the contact angle increases with Cu content of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Adhesion, Friction, and Surface Interactions · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Eustathopoulos N, Nicholas MG, Drevet B (1999) Wettability at high temperatures Pregamon materials series, vol 3. Elsevier, London
2. Kronberg M (1957) Plastic deformation of single crystals of sapphire: basal slip and twinning. Acta Metall Mater 5(9):50710.1016/0001-6160(57)90090-1 ↗
3. Chatain D (2008) Anisotropy of wetting. Annu Rev Mater Res 38:4510.1146/annurev.matsci.38.060407.130210 ↗
4. Kitayama M, Glaeser AM (2002) The Wulff shape of alumina: III, undoped alumina. J Am Ceram Soc 85(3):61110.1111/j.1151-2916.2002.tb00140.x ↗
5. Choi JH, Kim DY, Hockey BJ, Wiederhorn SM, Handwerker CA, Blendell JE, Carter WC, Roosen AR (1997) Equilibrium shape of internal cavities in sapphire. J Am Ceram Soc 80(1):62. doi: 10.1111/j.1151-2916.1997.tb02791.x10.1111/j.1151-2916.1997.tb02791.x ↗
6. Saiz E, Cannon RM, Tomsia AP (1999) Energetics and atomic transport at liquid metal/Al2O3 interfaces. Acta Mater 47(15–16):420910.1016/S1359-6454(99)00279-7 ↗
7. Shen P, Fujii H, Matsumoto T, Nogi K (2004) Critical factors affecting the wettability of α-alumina by molten aluminum. J Am Ceram Soc 87(7):126510.1111/j.1151-2916.2004.tb07721.x ↗
8. Shen P, Fujii H, Matsumoto T, Nogi K (2003) The influence of surface structure on wetting of α-Al2O3 by aluminum in a reduced atmosphere. Acta Mater 51(16):489710.1016/S1359-6454(03)00332-X ↗
9. Aguilar-Santillan J (2013) The influence of surface anisotropy crystalline structure on wetting of sapphire by molten aluminum. Metall Mater Trans A 44:1–810.1007/s11661-012-1582-x ↗
10. Ownby PD, Li KWK, Weirauch Jr DA (1991) High-temperature wetting of sapphire by aluminum. J Am Ceram Soc 74(6):127510.1111/j.1151-2916.1991.tb04097.x ↗
11. Shen P, Fujii H, Matsumoto T, Nogi K (2005) Influence of substrate crystallographic orientation on the wettability and adhesion of α-Al2O3 single crystals by liquid Al and Cu. J Mater Sci 40(9-10):2329. doi: 10.1007/s10853-005-1954-310.1007/s10853-005-1954-3 ↗
12. Ownby PD, Liu J (1988) Surface energy of liquid copper and single-crystal sapphire and the wetting behavior of copper on sapphire. J Adhes Sci Technol 2(1):25510.1163/156856188X00264 ↗
13. O’Brien TE, Chaklader ACD (1974) Effect of oxygen on the reaction between copper and sapphire. J Am Ceram Soc 57(8):32910.1111/j.1151-2916.1974.tb10915.x ↗
14. Diemer M, Neubrand A, Trumble KP, Rödel J (1999) Influence of oxygen partial pressure and oxygen content on the wettability in the copper–oxygen–alumina system. J Am Ceram Soc 82(10):282510.1111/j.1151-2916.1999.tb02163.x ↗
15. Ghetta V, Fouletier J, Chatain D (1996) Oxygen adsorption isotherms at the surfaces of liquid Cu and Au–Cu alloys and their interfaces with Al2O3 detected by wetting experiments. Acta Mater 44(5):192710.1016/1359-6454(95)00312-6 ↗
16. Oh SH, Chisholm MF, Kauffmann Y, Kaplan WD, Luo W, Rühle M, Scheu C (2010) Oscillatory mass transport in vapor–liquid–solid growth of sapphire nanowires. Sci Agric 330(6003):48910.1126/science.1190596 ↗
17. Levi G, Kaplan WD (2002) Oxygen induced interfacial phenomena during wetting of alumina by liquid aluminium. Acta Mater 50(1):7510.1016/S1359-6454(01)00333-0 ↗
18. Laurent V, Chatain D, Chatillon C, Eustathopoulos N (1988) Wettability of monocrystalline alumina by aluminium between its melting point and 1273 K. Acta Metall Mater 36(7):179710.1016/0001-6160(88)90248-9 ↗
19. Wang DJ, Wu ST (1995) The wettability of copper-containing aluminum melt on sapphire. Acta Metall Mater 43(8):291710.1016/0956-7151(95)00004-F ↗
20. Klinter AJ, Leon-Patiño CA, Drew RAL (2010) Wetting phenomena of Al–Cu alloys on sapphire below 800 °C. Acta Mater 58(4):135010.1016/j.actamat.2009.10.040 ↗
21. Klinter AJ, Mendoza-Suarez G, Drew RAL (2008) Wetting of pure aluminum and selected alloys on polycrystalline alumina and sapphire. Mater Sci Eng A 495(1–2):14710.1016/j.msea.2007.10.113 ↗
22. Naka M, Hirono Y, Okamoto I (1984) Wetting of alumina by molten aluminum and aluminum–copper alloys (welding physics, process & instrument). Trans JWRI 13(2):201
23. Champion J, Keene B, Sillwood J (1969) Wetting of aluminium oxide by molten aluminium and other metals. J Mater Sci 4(1):39. doi: 10.1007/BF0055504610.1007/BF00555046 ↗
24. Schmitz J, Brillo J, Egry I (2010) Surface tension of liquid Cu and anisotropy of its wetting of sapphire. J Mater Sci 45(8):2144. doi: 10.1007/s10853-010-4212-210.1007/s10853-010-4212-2 ↗
25. Schmitz J (2011) Untersuchung der Anisotropie im Benetzungsverhalten flüssiger Al–Cu Legierungen auf einkristallinen orientierten Al2O3-Substraten. Ph.D. thesis, Techn. Hochsch., Aachen. http://darwin.bth.rwth-aachen.de/opus3/volltexte/2011/3641/
26. Saiz E, Tomsia AP, Cannon RM (1998) Ridging effects on wetting and spreading of liquids on solids. Acta Mater 46(7):234910.1016/S1359-6454(98)80016-5 ↗
27. Naidich YV (1981) Progress in surface and membrane science, vol 14. Academic Press, New York
28. Tournier C, Lorrain B, Guyadec F, Eustathopoulos N (1996) The influence of non-stoichiometry of oxides on their wettability by liquid metals. J Mater Sci Lett 15(6):48510.1007/BF00275409 ↗
29. Hallstedt B, Risold D, Gauckler LJ (1994) Thermodynamic assessment of the copper–oxygen system. J Phase Equilib 15(5):48310.1007/BF02649399 ↗
30. Jacob KT, Alcock CB (1975) Thermodynamic assessment of the copper-oxygen system. J Am Ceram Soc 58(5–6):19210.1111/j.1151-2916.1975.tb11441.x ↗
31. Aguilar-Santillan J (2009) Wetting of Al/sapphire (0001) system: measurement effect and affecting factors. Metall Mater Trans B 40(3):37610.1007/s11663-009-9237-z ↗
32. Brennan JJ, Pask JA (1968) Effect of nature of surfaces on wetting of sapphire by liquid aluminum. J Am Ceram Soc 51(10):56910.1111/j.1151-2916.1968.tb13324.x ↗
33. French T, Somorjai GA (1970) Composition and surface structure of the (0001) face of α-alumina by low-energy electron diffraction. J Phys Chem 74(12):248910.1021/j100706a014 ↗
34. Gautier M, Duraud J, Pham Van L, Guittet M (1991) Modifications of α-Al2O3 (0001) surfaces induced by thermal treatments or ion bombardment. Surf Sci 250(1):7110.1016/0039-6028(91)90710-A ↗
35. Renaud G, Villette B, Vilfan I, Bourret A (1994) Atomic structure of the α-Al2O3 (0001) $$(\sqrt {31}\times \sqrt{31})\hbox{R}\pm 9\circ$$ ( 31 × 31 ) R ± 9 ∘ reconstruction. Phys Rev Lett 73(13):182510.1103/PhysRevLett.73.1825 ↗
36. Gillet E, Ealet B (1992) Characterization of sapphire surfaces by electron energy-loss spectroscopy. Surf Sci 273(3):42710.1016/0039-6028(92)90079-L ↗
37. Toofan J, Watson P (1998) The termination of the α-Al2O3 (0001) surface: a LEED crystallography determination. Surf Sci 401(2):16210.1016/S0039-6028(97)01031-5 ↗
38. Gautier M, Fenaud G, Pham Van L, Villette B, Pollak M, Thromat N, Jollet F, Duraud JP (1994) α-Al2O3 (0001) Surfaces: atomic and electronic structure. J Am Ceram Soc 77(2):32310.1111/j.1151-2916.1994.tb06999.x ↗
39. Vilfan I, Deutsch T, Lançon F, Renaud G (2002) Structure determination of the (33 × 33) reconstructed α-Al2O3 (0001). Surf Sci 505:L21510.1016/S0039-6028(02)01380-8 ↗
40. Vermeersch M, Sporken R, Lambin P, Caudano R (1990) The Al/Al2O3 interface formation as studied by electron spectroscopies. Surf Sci 235(1):510.1016/0039-6028(90)90101-D ↗
41. Jarvis EAA, Carter EA (2001) Metallic Character of the Al2O3 (0001)- $$(\sqrt{31}\times\sqrt{31}) {R}\pm 9\circ$$ ( 31 × 31 ) R ± 9 ∘ surface reconstruction. J Phys Chem B 105(18):404510.1021/jp003587c ↗
42. Barth C, Reichling M (2001) Imaging the atomic arrangements on the high-temperature reconstructed α-Al2O3 (0001) surface. Nat Biotechnol 414(6859):5410.1038/35102031 ↗
43. Chang CC (1971) Silicon-on-sapphire epitaxy by vacuum sublimation: LEED–Auger studies and electronic properties of the films. J Vac Sci Technol 8(3):50010.1116/1.1314585 ↗
44. Susnitzky DW, Carter CB (1986) Identification of α-alumina surface structures by electron diffraction. J Am Ceram Soc 69(9):C21710.1111/j.1151-2916.1986.tb07484.x ↗
45. Hsu T, Kim Y (1991) Structure of the α-Al2O3 (1120) surfaces: facets and reconstruction. Surf Sci 258(1):11910.1016/0039-6028(91)90907-A ↗
46. Becker T, Birkner A, Witte G, Wöll C (2002) Microstructure of the $$\alpha\hbox{-Al}_2\hbox{O}_3(11\bar 20)$$ α -Al 2 O 3 ( 11 2 ¯ 0 ) surface. Phys Rev B 65(11):11540110.1103/PhysRevB.65.115401 ↗
47. Beitel G, Markert K, Wiechers J, Hrbek J, Behm RJ (1993) Characterization of single crystal α-Al2O3(0001) and (1120) surfaces and Ag/Al2O3 model catalysts by atomic force microscopy. In: HJ Freund, E Umbach (eds) Adsorption on ordered surfaces of ionic solids and thin films. Springer series in surface sciences, vol 33. Springer, Berlin, pp 71–8210.1007/978-3-642-78632-7_7 ↗
48. Schildbach M, Hamza A (1992) Sapphire $$(11\bar{20})$$ ( 11 20 ¯ ) surface: structure and laser-induced desorption of aluminum. Phys Rev B 45(11):619710.1103/PhysRevB.45.6197 ↗
49. Chang CC (1969) LEED studies of thinfilm silicon overgrowths on α alumina. In: The structure and chemistry of solid surfaces. Wiley, New York, pp 77-1–77-14
50. Gandman M, Kauffmann Y, Koch CT, Kaplan WD (2013) Direct quantification of ordering at a solid–liquid interface using aberration corrected transmission electron microscopy. Phys Rev Lett 110:086106. doi: 10.1103/PhysRevLett.110.08610610.1103/PhysRevLett.110.086106 ↗
51. Li JG, Coudurier L, Eustathopoulos N (1988) Wettability of monocrystalline alumina by aluminium between its melting point and 1273 K. J Mater Sci Rev Int Hautes Temp Refract 24(2):85
52. Schmitz J, Brillo J, Egry I, Schmid-Fetzer R (2009) Surface tension of liquid Al–Cu binary alloys. Int J Mater Res 100(11):152910.3139/146.110221 ↗
53. Li JG, Coudurier L, Eustathopoulos N (1989) Work of adhesion and contact-angle isotherm of binary alloys on ionocovalent oxides. J Mater Sci 24(3):1109. doi: 10.1007/BF0114880610.1007/BF01148806 ↗