A new method to evaluate material fatigue behavior
Source abstract
Abstract
A new technique, the wavelet-based AE technique, was developed to investigate material fatigue behavior. In this study, an analog model was established using “clean” AE signal. The model was linearized to find the corresponding material constants. Specimens of Palacos R cement fabricated using both HM and VM methods were tested to demonstrate the proposed model. It was found that the material constants (the slopes of the test curve) were consistent regardless of the fabrication methods. However, there was a significant difference between the intercepts of the test curves when AE techniques were used, whereas the classical fracture mechanics approach failed to distinguish this difference. It was found that the slope and intercept of a test curve can be used as indicators to evaluate material fatigue behavior. In addition, the results showed that the proposed method provided a more accurate estimation of the material constant (slope) in the fatigue model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Engineering Applied Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G. Qi and J. Pujol and Z. F. Fan, Journal of Biomedical Materials Research 52(1) (2000) 256.10.1002/1097-4636(200011)52:2<256::AID-JBM3>3.0.CO;2-S ↗
2. G. Qi and J. Pujol, Journal of Acoustic Emission 17(3/4) (1999) 111.
3. G. Qi, in 42nd Acoustic Emission Working Group Meeting, Princeton, NJ, June 1999.
4. Idem., NDT & E International 33(3) (2000) 133.10.1016/S0963-8695(99)00037-7 ↗
5. G. Qi, A. A. Barhorst and J. Hashemi, In VIII International Congress on Experimental Mechanics, Nashville, TN, June 1996, p. 242.
6. G. Qi and A. A. Barhorst, Engineering Fracture Mechanics 58(4) (1997) 363.10.1016/S0013-7944(97)00090-8 ↗
7. G. Qi, A. A. Barhorst, J. Hashemi and G. Kamala, Composites Science and Technology 57(4) (1997) 389.10.1016/S0266-3538(96)00157-1 ↗
8. G. Qi and E. T. Ng, in ASNT Spring Conference and 8th Annual Research Symposium, Orlando, FL, March 1999, p. 49.
9. D. Fang and A. Berkovits, Journal of Acoustic Emission 11(2) (1993) 85.
10. P. Paris and F. Erdogan, Journal of Basic Engineering 85 (1968) 528.10.1115/1.3656900 ↗
11. ASTM. ASTM E399–90. ASTM Standard, 1990.
12. M. N. Bassim, S. St. lawrence and C. D. Liu, Engineering Fracture Mechanics 47(2) (1994) 207.10.1016/0013-7944(94)90221-6 ↗
13. F. Hamel, J. P. Bailon and M. N. Bassim, ibid. 14(4) (1981) 853.10.1016/0013-7944(81)90097-7 ↗
14. E. T. Ng, PhD thesis, The University of Memphis, 2000.
15. E. T. Ng and G. Qi, Engineering Fracture Mechancis, In press.
16. D. Hansen and J. S. Jensen, Acta Orthop Scand 63(1) (1992) 13.10.3109/17453679209154841 ↗
17. S. Smeds and D. Goertzen, Clinical Orthopaedics and Related Research (334) (1997) 326.10.1097/00003086-199701000-00042 ↗
18. M. M. Vila, M. P. Ginebra, F. J. Gil and J. A. Planell, Journal of Biomedical Materials Research (Applied Biomaterials) 48 (1999) 128.10.1002/(SICI)1097-4636(1999)48:2<128::AID-JBM6>3.0.CO;2-1 ↗
19. R. L. Wixson, E. P. Lautenschlager and M. A. Novak, Journal of Arthrop. 2 (1987) 141.10.1016/S0883-5403(87)80021-9 ↗