Intermediate annealing of pure aluminum during cyclic equal channel angular pressings
Source abstract
Abstract
Intermediate heat treatment was employed to anneal pure Al samples subjected to cyclic Equal Channel Angular (ECA) pressing in order to investigate the microstructural change and tensile properties of as-pressed and annealed samples. As-pressed samples were annealed at 200°C for 1 hr after 2 and 4 passages. Some annealed samples were pressed further to compare the changes in the properties of pure Al with the same equivalent strain induced by cyclic ECAP but having different thermal history. Intermediate annealing in the cyclic repetitive ECA pressing appears to be an effective method to form an equiaxed, fine-grained structure with high misorientation angle. It decreases the aspect ratio of subgrains while keeping the grains size unchanged. Annealing followed by further pressing results in an increase in the aspect ratio but small decrease in the grain size. It is speculated that recrystallization of ECA pressed aluminum is responsible for the significant increase in the misorientation angle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. R. Z. Valiev, N. A. Krasilnikov and N. K. Tsenev, Mater. Sci. Eng. A 137 (1991) 35.10.1016/0921-5093(91)90316-F ↗
2. P. B. Berbon, N. K. Tsenev, R. Z. Valiev, M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon, Metall Mater. Trans. 29A (1998) 2237.10.1007/s11661-998-0101-6 ↗
3. S. Ferrasse, V. M. Segal, K/T. Hartwig and R. E. Goforth, ibid. 28A (1997) 1047.10.1007/s11661-997-0234-z ↗
4. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R. Z. Valiev and T. G. Langdon, Acta Metall. 44 (1996) 2973.
5. Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, Acta Mater. 45 (1997) 4733.10.1016/S1359-6454(97)00100-6 ↗
6. M. Furukawa, Z. Horita, M. Nemoto, R. Z. Valiev and T. G. Langdon, Acta Metall. 44 (1996) 4619.
7. A. Gholinia, P. B. Prangnell and M. V. Markushev, Acta Mater. 48 (2000) 1115.10.1016/S1359-6454(99)00388-2 ↗
8. U. Chakkingal, A. B. Suriadi and P. R. Thomson, Mater. Sci. Eng. 266A (1999) 241.10.1016/S0921-5093(98)01129-0 ↗
9. Idem., Scripta Mater. 39 (1998) 677.10.1016/S1359-6462(98)00234-6 ↗
10. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto and T. G. Langdon, ibid. 35 (1996) 143.10.1016/1359-6462(96)00107-8 ↗
11. Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, Acta Mater. 46 (1998) 3317.10.1016/S1359-6454(97)00494-1 ↗
12. J. Y. Chang, J. S. Yoon and G. H. Kim, Scripta Mater. 45 (2001) 347.10.1016/S1359-6462(01)01040-5 ↗
13. W. J. Kim, C. W. An, Y. S. Kim and S. I. Hong, ibid. 47 (2002) 39.10.1016/S1359-6462(02)00094-5 ↗
14. J. Y. Chang, G. H. Kim and I. G. Moon, ibid. 44 (2001) 331.10.1016/S1359-6462(00)00581-9 ↗
15. H. J. McQueen and J. J. Jonas, “Plastic Deformation of Materials,” edited by R. J. Arsenault (Academic Press, 1975) p. 394.