journal article·2003-05

Combustion synthesis and subsequent sintering of titanium-matrix composites

A. Chrysanthou, Y. K. Chen, A. Vijayan, J. O'Sullivan

Journal of Materials Science· Volume 38· Issue 9
Publisher page

Abstract

Titanium-matrix composites containing up to 50 wt% TiC particles were prepared by combustion synthesis using elemental powders. The products were subsequently sintered at 1160°C for various periods of time. SEM and X-ray diffraction were used to assess the changes that took place during the two stages of processing. Products of combustion synthesis containing in excess of 25%TiC contained large cracks as well as agglomerates of carbide particles that were undesirable from the point of view of reinforcing the metal. The carbide obtained by combustion synthesis had a higher carbon content than that expected according to the Ti-C equilibrium phase diagram, due to the non-equilibrium nature of the reaction. During the sintering stage, the carbide of non-equilibrium composition reacted with titanium to yield the carbide of equilibrium composition. The composition changes were investigated and their significance on the sintering process is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. R. Holmes and C. Silgman, Flight-Vehicle Mater. 1 (1994) 307.
2. P. S. Grant, Mater. World 5 (1997) 77.
3. T. Christman, K. Heady and T. Vreeland, Scripta Metall. Mater. 25 (1991) 631.10.1016/0956-716X(91)90104-9 ↗
4. P. A. Dearnley and K. A. roberts, in CHEMECA' 90, Australasian Chemical Engineering Conference, 1990, p. 477.
5. E. K. Storms, “The Refractory Carbides” (Academic Press, 1967) p. 3.10.1016/B978-1-4832-3070-2.50004-5 ↗
6. P. A. Dearnley and K. A. Roberts, Powder Met. 34 (1991) 112.10.1179/pom.1991.34.2.112 ↗
7. S. Ranganath, J. Mater. Sci. 32 (1997) 1.
8. J. K. Shang and R. O. Ritchie, Scripta Metall. Mater. 24 (1990) 1691.10.1016/0956-716X(90)90529-P ↗
9. J. Chen, Z. Geng and B. A. Chin, “High Temperature Ordered Intermetallics III,” Mater. Res. Soc. Symp. Proc. 133 (1989) 447.10.1557/PROC-133-447 ↗
10. O. R. Bergman and J. Barrington, J. Amer. Ceram. Soc. 49 (1966) 502.10.1111/j.1151-2916.1966.tb13308.x ↗
11. E. K. Storms, “The Refractory Carbides” (Academic Press, 1967) p. 8.10.1016/B978-1-4832-3070-2.50004-5 ↗
12. P. Wanjara, R. A. L. Drew, J. Root and S. Yue, Acta Mater. 48 (2000) 1443.10.1016/S1359-6454(99)00453-X ↗
13. S. Ranganath and J. Subrahmanyam, Metall. Mater. Trans. A 27 (1995) 237.10.1007/BF02647766 ↗