journal article·2003-09

NaCl-induced accelerated oxidation of 304 stainless steel and Fe-Mn-Al alloy at 900°C

Jyh-Wei Lee, Chaur-Jeng Wang, Jenq-Gong Duh

Journal of Materials Science· Volume 38· Issue 17
Publisher page

Abstract

The high-temperature corrosion behavior of cold-rolled and annealed 304 stainless steel (304SS) and Fe-29Mn-8Al-2.5Si-2Cr-0.74C alloy coated with 0.002 g cm−2 NaCl initially were studied at 900°C in air. The corrosion kinetics of the two alloys follow the parabolic rate law. The initial NaCl coating accelerates oxidation of these alloys by oxychlorination and chlorination/oxidation cyclic reactions, and catalytic actions of chloride or chlorine are thought to be the principal causes. A bulky, layered scale as well as some intergranular attack is noted on the annealed 304SS, and intergranular attack distributes over the alloy substrate of the cold-rolled 304SS during a 144 h exposure. With the formation of a compact Al2O3 scale to decrease further chlorine attack, the corrosion resistance of Fe-Mn-Al alloy is superior to that of 304SS in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Y. Shinata, F. Takahashi and K. Hashiura, Mater. Sci. and Eng. 87 (1987) 399.10.1016/0025-5416(87)90404-6 ↗
2. M. K. Hossain and S. R. J. Saunders, Oxid. Met. 12 (1978) 1.10.1007/BF00609972 ↗
3. Y. Shinata, ibid. 27 (1987) 315.10.1007/BF00659274 ↗
4. Y. Shinata, M. Hara and T. Nakagawa, Mater. Trans. JIM 32 (1991) 969.10.2320/matertrans1989.32.969 ↗
5. C. J. Wang and Y. C. Chang, Mater. Chem. Phys. 76 (2002) 151.10.1016/S0254-0584(01)00515-6 ↗
6. R. Sivakumar, P. K. Sagar and M. L. Bhatia, Oxid. Met. 24 (1985) 315.10.1007/BF00657063 ↗
7. A. U. Seybolt, ibid. 2 (1970) 119.10.1007/BF00603652 ↗
8. G. Y. Lai, in “High-Temperature Corrosion of Engineering Alloys” (ASM International, 1990) p. 176.
9. C. J. Wang and T. T. He, Oxid. Met. 58 (2002) 415.10.1023/A:1020119107724 ↗
10. J. G. Duh and C. J. Wang, J. Mater. Sci. 25 (1990) 2063.10.1007/BF01045765 ↗
11. R. D. K. Misra and R. Sivakumar, Oxid. Met. 25 (1986) 83.10.1007/BF00807997 ↗
12. E. T. Turkdogan, in “Physical Chemistry of High Temperature Technology” (Academic Press, New York, 1980).
13. O. Kubaschewski, C. B. Alcock and P. J. Spencer, in “Materials Thermochemistry,” 6th ed. (Pergamon Press, Oxford and New York, 1993).
14. O. Kubaschewski and E. L. Evans, in “Metallurgical Thermochemistry,” 2nd ed. (Wiley, New York, 1958).
15. A. Zahs, M. Spiegel and H. J. Grabke, Corr. Sci. 42 (2000) 1093.10.1016/S0010-938X(99)00142-0 ↗
16. ASM, in “Heat Treatment's Guide Standard Practices and Procedures for Steel,” edited by P. M. Unterveiser, H. E. Boyer and J. J. Kubbs (ASM international, 1988) p. 410.
17. R. Wang, M. J. Straszheim and R. A. Rapp, Oxid. Mat. 21 (1984) 71.10.1007/BF00659468 ↗