A low temperature catalytic-type combustible gas sensor based on Pt supported zeolite catalyst films
Source abstract
Abstract
In this study, a catalytic-type combustible gas sensor was fabricated by the screen-printing method. Pt supported catalysts (Pt-HZSM5) were prepared by a wet impregnation method using HZSM5 zeolite as support. It was found that Pt-HZSM5 catalysts have a highly catalytic activity to H2 and CO at low temperatures and a selectively and fully combustible was observed at only 150 °C. A good dispersion state of Pt nanoparticles on HZSM5 zeolite particles was beneficial for the catalytic oxidization of CO and H2. However, a high loading amounts lead to a poor dispersion state and a weak catalytic activity. The thick film sensor based on Pt-HZSM5 catalyst was found to be highly sensitive to combustible gas with a good linearity up to 2% and a limitation of detection (LOD) around 50 ppm. Due to the low operation temperature, a highly selectivity was obtained for CO and H2 and no cross-sensitivity to interfering gases such as CH4 and VOCs. It was indicated that the present developed catalytic-type gas sensors could be used for the leakage detection and monitor for H2 and CO with a low power consumption and a good selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Catalytic Processes in Materials Science · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Jang K-W, Choi J-H, Jeon J-H, Kim H-S (2019) Combustible gas classification modeling using support vector machine and pairing plot scheme. Sensors 19(22):1–10. https://doi.org/10.3390/s1922501810.3390/s19225018 ↗
2. Xi K, Wang Y, Jiang K et al (2020) Support interaction of Pt/CeO2 and Pt/SiC catalysts prepared by nano platinum colloid deposition for CO oxidation. J Rare Earths 38(4):376–38310.1016/j.jre.2019.07.012 ↗
3. Hosoya A, Tamura S, Imanaka N (2013) Low-temperature-operative carbon monoxide gas sensor with novel co oxidizing catalyst. Chem Lett 42(4):441–44310.1246/cl.130055 ↗
4. Woosuck S, Kazuki T, Noriya I (2019) Thermoelectric gas sensors with selective combustion catalysts. J Ceram Soc Jpn 127(2):57–6610.2109/jcersj2.18098 ↗
5. Fukui K, Nishida S et al (1997) CO gas sensor based on Au-La2O3 added SnO2 ceramics with siliceous zeolite coat. Sens Actuators B 45(2):101–10610.1016/S0925-4005(97)00280-3 ↗
6. Pattaraphon RODLAMUL, Shinji TAMURA, Nobuhito IMANAKA (2018) Sensitivity enhancement of catalytic combustion-type CO gas sensor using an artificial diamond with Pt-loaded CeO2–ZrO2–ZnO based catalyst. J Ceram Soc Jpn 126(10):750–75410.2109/jcersj2.18043 ↗
7. Yuasa M, Nagano T (2013) Catalytic combustion-type hydrogen sensor using BaTiO3-based PTC thermistor. J Am Ceram Soc 96(6):1789–179410.1111/jace.12217 ↗
8. Liu X, Dong H, Xia S (2013a) Micromachined catalytic combustion type gas sensor for hydrogen detection. Micro Nano Lett 8(10):668–67110.1049/mnl.2013.0468 ↗
9. Liu S, Xiaodong Wu, Weng D et al (2015) Roles of acid sites on Pt/H-ZSM5 catalyst in catalytic oxidation of diesel soot. ACS Catal 5(2):909–91910.1021/cs5018369 ↗
10. Maia AJ, Pereira EB, Sola AC et al (2018) Understanding bifunctional behavior of Ni/HZSM5 catalyst under isobutane atmosphere. Mol Catal 485:145–15110.1016/j.mcat.2018.02.002 ↗
11. Jia Fu, Feng X, Liu Y, Yang C (2017) Effect of pore confinement on the adsorption of mono-branched alkanes of naphtha in ZSM-5 and Y zeolite. Appl Surf Sci 423:131–13810.1016/j.apsusc.2017.06.058 ↗
12. Setiabudi HD, Jalil AA, Triwahyono S (2013) Ir/Pt-HZSM5 for n-pentane isomerization: effect of Si/Al ratio and reaction optimization by response surface methodology. Chem Eng J 217:300–30910.1016/j.cej.2012.12.011 ↗
13. Chu R-Z, Ting-ting Xu, Meng X-L, Guo-guang Wu (2016) Mechanism of reaction of CeO2–CaO–Pd/HZSM5 catalyst in the syngas process in the presence of sulfur-containing impurities. Prog React Kinet Mech 41(3):235–24410.3184/146867816X14702288640948 ↗
14. Zeng Y, Hua Z, Tian X, Li X et al (2018) Selective detection of methanol by zeolite/Pd-WO3 gas sensors. Sens Actuators B Chem 273:1291–129910.1016/j.snb.2018.07.041 ↗
15. Yamaguchi N, Kamiuchi N, Muroyama H et al (2011) Effect of reduction treatment on CO oxidation over Pt/SnO2 catalyst. Catal Today 164(1):169–17510.1016/j.cattod.2010.12.036 ↗
16. Qiu Z, Tian X, Li Y et al (2018) NH3 sensing properties and mechanism of Ru-loaded WO3 nanosheets. J Mater Sci Mater Electron 29(13):11336–1134410.1007/s10854-018-9221-y ↗
17. Wang H, Dong J, Allard LF et al (2019) Single-site Pt/La-Al2O3 stabilized by barium as an active and stable catalyst in purifying CO and C3H6 emissions. Appl Catal B 244:327–33910.1016/j.apcatb.2018.11.034 ↗
18. Tian C, Zhou M, Hua Z et al (2020) Investigation on acetone sensing properties and mechanism of p-type Cr2WO6 nanoparticles. J Mater Sci Mater Electron 31(5):3899–390910.1007/s10854-020-02935-5 ↗
19. Lim B, Jiang M, Tao J et al (2009) Pd-Pt bimetallic nanodendrites with high activity for oxygen reduction. Science 324(5932):1302–130510.1126/science.1170377 ↗
20. Jauhar AM, Ma Z, Xiao M et al (2020) Space-confined catalyst design toward ultrafine Pt nanoparticles with enhanced oxygen reduction activity and durability. J Power Sour 228607:1–9. https://doi.org/10.1016/j.jpowsour.2020.22860710.1016/j.jpowsour.2020.228607 ↗
21. Araiza DG, Gomez-Cortes A, Diaz G (2017) Reactivity of methanol over copper supported on well-shaped CeO2: a TPD-DRIFTS study. Catal Sci Technol 7(22):5224–523510.1039/C7CY00984D ↗
22. Pirola C, Galli F, Patience GS (2018) Experimental methods in chemical engineering: temperature programmed reduction-TPR. Can J Chem Eng 96(11):2317–232010.1002/cjce.23317 ↗
23. Zhou J-H, Sui Z-J, Zhu J et al (2007) Characterization of surface oxygen complexes on carbon nanofibers by TPD. XPS FT-IR Carbon 45(4):785–79610.1016/j.carbon.2006.11.019 ↗
24. He R, Men Y, Huang X et al (2018) Interaction of ethanol with MgO-SiO2 catalysts studied by TPD techniques. Chem Lett 47(9):1097–110010.1246/cl.180474 ↗
25. Chi-Hwan H, Dae-Woong H, Sang-Do H et al (2007) Catalytic combustion type hydrogen gas sensor using TiO2 and UV-LED. Sens Actuators B Chem 125(1):224–22810.1016/j.snb.2007.02.017 ↗
26. Yan Li, Hua Zhongqiu, Wu Yi, et al (2018) Surface modification of Pt-loaded WO3 nanosheets for acetone sensing application. Chem Lett 47(2):167–17010.1246/cl.170990 ↗
27. Ayaka H, Shinji T, Nobuhito I (2015) A new catalytic combustion-type carbon monoxide gas sensor employing precious metal-free CO oxidizing catalyst. ISIJ Int 55(8):1699–170110.2355/isijinternational.ISIJINT-2015-134 ↗
28. Qiu Z, Hua Z, Li Y et al (2018) Acetone sensing properties and mechanism of Rh-loaded WO3 nanosheets. Fron Chem 385:1–6. https://doi.org/10.3389/fchem.2018.0038510.3389/fchem.2018.00385 ↗
29. Li Y, Hua Z, Yi Wu, Zeng Y et al (2018) Modified impregnation synthesis of Ru-loaded WO3 nanoparticles for acetone sensing. Sens Actuators B Chem 265:249–25610.1016/j.snb.2018.03.037 ↗
30. Zeng Y, Hua Z, Tian X, Li Y et al (2017) Modified impregnation synthesis of Fe-loaded WO3 nanosheets and the gas-sensing properties. Chem Lett 46:1353–135610.1246/cl.170555 ↗
31. Liu X, Dong H, Xia S (2013b) Micromachined catalytic combustible hydrogen gas sensor based on nano-structured SnO2. Acta Chim Sinica 71(4):657–66210.6023/A12121022 ↗
32. Giarratano F, Arzac GM, Godinho V et al (2018) Nanoporous Pt-based catalysts prepared by chemical dealloying of magnetron-sputtered Pt-Cu thin films for the catalytic combustion of hydrogen. Appl Catal B 235:168–17610.1016/j.apcatb.2018.04.064 ↗