journal article·2020-10

Study on the superior lithium storage performance of carbon/Sn–Mo oxide composite as lithium-ion battery anode

Yanli Chen, Hu Peng, Heng Jiang, Jie Zhang, Xin Chen, Ying Zhang, Dongtao Ge, Hang Guo

Journal of Materials Science· Volume 55· Issue 29
Publisher page

Abstract

A facile generic solvothermal strategy is employed to prepare C/SnOx/MoOy composite with evenly distributed C, Sn, Mo and O elements. The multi-element characteristic of active components and the introduction of carbon phase contribute greatly to the improved electrochemical performance as LIBs anodes. The influence of carbon phase and content of Sn and Mo on electrochemical behavior were investigated in this work. Carbon phase contributes greatly to the enhanced electric conductivity, structural integrity and pseudocapacitance contribution of the electrode. The best electrochemical performance is achieved in carbon/Sn–Mo oxide anode with a Sn/Mo ratio of about 1:1, indicating the mutual buffering relationship between Sn and Mo due to the different working voltage toward lithium. As a result, an excellent capacity retention of 98% (vs 2nd cycle) is delivered after 500 cycles at 0.5 A g−1. Even at a high rate of 2.0 A g−1, the capacity could be well remained after 500 cycles. Moreover, full cell employing such a C/SnOx/MoOy anode in combination with LiCoO2 cathode offers a good cycling performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Schmuch R, Wagner R, Hörpel G, Placke T, Winter M (2018) Performance and cost of materials for lithium-based rechargeable automotive batteries. Nat Energy 3:267–27810.1038/s41560-018-0107-2 ↗
2. Eshetu GG, Figgemeier E (2019) Confronting the challenges of next-generation silicon anode-based lithium-ion batteries: role of designer electrolyte additives and polymeric binders. Chemsuschem 12:267–27810.1002/cssc.201900209 ↗
3. Chevrier VL, Liu L, Wohl R et al (2018) Design and testing of prelithiated full cells with high silicon content. J Electrochem Soc 165:A1129–A113610.1149/2.1161805jes ↗
4. Sun Y, Zheng G, Seh ZW et al (2016) Graphite-encapsulated Li-metal hybrid anodes for high-capacity Li batteries. Chem 1:287–29710.1016/j.chempr.2016.07.009 ↗
5. Dörfler S, Strubel P, Jaumann T et al (2018) On the mechanistic role of nitrogen- doped carbon cathodes 30 in lithium-sulfur batteries with low electrolyte weight portion. Nano Energy 54:116–12810.1016/j.nanoen.2018.09.065 ↗
6. Liu D, Kong Z, Liu X et al (2018) Spray-drying-induced assembly of skeleton-structured SnO2/graphene composite spheres as superior anode materials for high-performance lithium-ion batteries. ACS Appl Mater Interfaces 10:2515–252510.1021/acsami.7b15916 ↗
7. Xie Q, Liu P, Zeng D et al (2018) Dual electrostatic assembly of graphene encapsulated nanosheet-assembled ZnO-Mn-C hollow microspheres as a lithium ion battery anode. Adva Fun Mater 28:170743310.1002/adfm.201707433 ↗
8. Wu X, Zhao S-X, Yu L-Q, Li J-W, Zhao E-L, Nan C-W (2019) Lithium storage behavior of MoO3–P2O5 glass as cathode material for Li-ion batteries. Electrochim Acta 297:872–87810.1016/j.electacta.2018.12.039 ↗
9. Yu M, Sun Y, Du H et al (2019) Hollow porous carbon spheres doped with a low content of Co3O4 as anode materials for high performance lithium-ion batteries. Electrochim Acta 317:562–56910.1016/j.electacta.2019.06.027 ↗
10. Ding R, Zhang J, Qi J, Li Z, Wang C, Chen M (2018) N-doped dual carbon-confined 3D architecture rGO/Fe3O4/AC nanocomposite for high-performance lithium-ion batteries. ACS Appl Mater Interfaces 10:13470–1347810.1021/acsami.8b00353 ↗
11. Zhou X, Wan LJ, Guo YG (2013) Binding SnO2 nanocrystals in nitrogen-doped graphene sheets as anode materials for lithium-ion batteries. Adv Mater 25:2152–215710.1002/adma.201300071 ↗
12. Zhang S, Liang B, Fan Y et al (2019) Ferrocene as a novel additive to enhance the lithium-ion storage capability of SnO2/graphene composite. ACS Appl Mater Interfaces 11:31943–3195310.1021/acsami.9b09363 ↗
13. Jiang B, He Y, Li B et al (2017) Polymer-templated formation of polydopamine-coated SnO2 nanocrystals: anodes for cyclable lithium-ion batteries. Angew Chem Int Ed Engl 56:1869–187210.1002/anie.201611160 ↗
14. Lou XW, Li CM, Archer LA (2009) Designed synthesis of coaxial SnO2@carbon hollow nanospheres for highly reversible lithium storage. Adv Mater 21:2536–253910.1002/adma.200803439 ↗
15. Huang X, Wang H, Niu C, Rogach AL (2015) SnO2 nanoarrays for energy storage and conversion. CrystEngComm 17:5593–560410.1039/C5CE00867K ↗
16. Park MS, Wang GX, Kang YM, Wexler D, Dou SX, Liu HK (2007) Preparation and electrochemical properties of SnO2 nanowires for application in lithium-ion batteries. Angew Chem Int Ed Engl 46:750–75310.1002/anie.200603309 ↗
17. Elizabeth I, Mathur RB, Maheshwari PH, Singh BP, Gopukumar S (2015) Development of SnO2/multiwalled carbon nanotube paper as free standing anode for lithium ion batteries. Electrochim Acta 176:735–74210.1016/j.electacta.2015.06.156 ↗
18. Sun L, Si H, Zhang Y et al (2019) Sn-SnO2 hybrid nanoclusters embedded in carbon nanotubes with enhanced electrochemical performance for advanced lithium-ion batteries. J Power Sources 415:126–13510.1016/j.jpowsour.2019.01.063 ↗
19. Huang X, Cui S, Chang J et al (2015) A hierarchical tin/carbon composite as an anode for lithium-ion batteries with a long cycle life. Angew Chem Int Ed Engl 54:1490–149310.1002/anie.201409530 ↗
20. Wang LP, Leconte Y, Feng Z et al (2017) Novel preparation of N-doped SnO2 nanoparticles via laser-assisted pyrolysis: demonstration of exceptional lithium storage properties. Adv Mater. https://doi.org/10.1002/adma.20160328610.1002/adma.201603286 ↗
21. Jin WX, Ma SY, Tie ZZ et al (2015) One-step synthesis and highly gas-sensing properties of hierarchical Cudoped SnO2 nanoflowers. Sensor Actua B: Chem 213:171–18010.1016/j.snb.2015.02.075 ↗
22. Zhu C, Xia X, Liu J et al (2014) TiO2 nanotube @SnO2 nanoflake core–branch arrays for lithium-ion battery anode. Nano Energy 4:105–11210.1016/j.nanoen.2013.12.018 ↗
23. Deng J, Yan C, Yang L et al (2013) Sandwichstacked SnO2/Cu hybrid nanosheets as multichannel anodes for lithium ion batteries. ACS Nano 7:6948–695410.1021/nn402164q ↗
24. Xie W, Li S, Wang S et al (2014) N-doped amorphous carbon coated Fe3O4/SnO2 coaxial nanofibers as a binder-free self-supported electrode for lithium ion batteries. ACS Appl Mater Interfaces 6:20334–2033910.1021/am505829v ↗
25. Luo L, Xu W, Xia Z et al (2016) Electrospun ZnO–SnO2 composite nanofibers with enhanced electrochemical performance as lithium-ion anodes. Ceram Int 42:10826–1083210.1016/j.ceramint.2016.03.211 ↗
26. Qi Y, Zhang H, Du N, Zhai C, Yang D (2012) Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage. RSC Adv 2:9511–951610.1039/c2ra21765a ↗
27. Lu X, Wang P, Liu K, Niu C, Wang H (2018) Encapsulating nanoparticulate Sb/MoOx into porous carbon nanofibers via electrospinning for efficient lithium storage. Chem Eng J 336:701–70910.1016/j.cej.2017.12.022 ↗
28. Wang H, Rogach AL (2014) Hierarchical SnO2 nanostructures: recent advances in design, synthesis, and applications. Chem Mater 26:123–13310.1021/cm4018248 ↗
29. Cao D, Wang H, Li B et al (2016) Hydrothermal synthesis of SnO2 embedded MoO3-x nanocomposites and their synergistic effects on lithium storage. Electrochim Acta 216:79–8710.1016/j.electacta.2016.09.012 ↗
30. Wang H, Xie S, Yao T et al (2019) Casting amorphorized SnO2/MoO3 hybrid into foam-like carbon nanoflakes towards high-performance pseudocapacitive lithium storage. J Colloid Int Sci 547:299–30810.1016/j.jcis.2019.03.108 ↗
31. Zuo D-c, Song S-c, An C-s, Tang L-b, He Z-j, Zheng J-c (2019) Synthesis of sandwichlike structured Sn/SnOx@MXene composite through in-situ growth for highly reversible lithium storage. Nano Energy 62:401–40910.1016/j.nanoen.2019.05.062 ↗
32. Zhou X, Dai Z, Liu S, Bao J, Guo Y-G (2014) Ultra-uniform SnOx/carbon nanohybrids toward advanced lithium-ion battery anodes. Adv Mater 26:3943–394910.1002/adma.201400173 ↗
33. Zhao D, Wu X (2018) Nanoparticles assembled SnO2 nanosheet photocatalysts for wastewater purification. Mater Lett 210:354–35710.1016/j.matlet.2017.09.068 ↗
34. Wu X, Wang Q, Zhang W, Wang Y, Chen W (2016) Nanorod structure of polypyrrole-covered MoO3 for supercapacitors with excellent cycling stability. Mater Lett 182:121–12410.1016/j.matlet.2016.05.176 ↗
35. Fang S, Shen L, Li S et al (2019) Alloying reaction confinement enables high-capacity and stable anodes for lithium-ion batteries. ACS Nano 13:9511–951910.1021/acsnano.9b04495 ↗
36. Cui J, Xu Z-L, Yao S et al (2016) Enhanced conversion reaction kinetics in low crystallinity SnO2/CNT anodes for Na-ion batteries. J Mater Chem A 4:10964–1097310.1039/C6TA03541H ↗
37. Shen Z, Hu Y, Chen R et al (2019) Excimer ultraviolet-irradiated exfoliated graphite loaded with carbon-coated SnOx small nanoparticles as advanced anodes for high-rate-capacity lithium-ion batteries. Nanoscale 11:7744–775310.1039/C8NR10379H ↗
38. Wang C, Wu L, Wang H, Zuo W, Li Y, Liu J (2015) Fabrication and shell optimization of synergistic TiO2-MoO3 core-shell nanowire array anode for high energy and power density lithium-ion batteries. Adv Funct Mater 25:3524–353310.1002/adfm.201500634 ↗
39. Abouali S, Akbari Garakani M, Kim J-K (2018) Ultrafine SnO2 nanoparticles encapsulated in ordered mesoporous carbon framework for Li-ion battery anodes. Electrochim Acta 284:436–44310.1016/j.electacta.2018.07.162 ↗
40. Xue XY, Chen ZH, Xing LL, Yuan S, Chen YJ (2011) SnO2/alpha-MoO3 core-shell nanobelts and their extraordinarily high reversible capacity as lithium-ion battery anodes. Chem Commun (Camb) 47:5205–520710.1039/c1cc00076d ↗
41. Xia W, Zhang Q, Xu F, Sun L (2016) New insights into electrochemical lithiation/delithiation mechanism of α-MoO3 nanobelt by in situ transmission electron microscopy. ACS Appl Mater Interfaces 8:9170–917710.1021/acsami.6b01671 ↗
42. Lu P, Sun Y, Xiang H, Liang X, Yu Y (2018) 3D amorphous carbon with controlled porous and disordered structures as a high-rate anode material for sodium-ion batteries. Adv Energy Mater 8:170243410.1002/aenm.201702434 ↗
43. Wang J, Polleux J, Lim J, Dunn B (2007) Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles. J Phys Chem C 111:14925–1493110.1021/jp074464w ↗
44. Paredes Camacho RA, Wu A-M, Jin X-Z, Dong X-F, Li X-N, Huang H (2019) Effective carbon constraint of MnS nanoparticles as high-performance anode of lithium-ion batteries. J Power Sources 437:22693110.1016/j.jpowsour.2019.226931 ↗