journal article·2018-10

Thermal and mechanical properties of fluorinated ethylene propylene and polyphenylene sulfide-based composites obtained by high-energy ball milling

V. V. Tcherdyntsev, L. K. Olifirov, S. D. Kaloshkin, M. Yu. Zadorozhnyy, V. D. Danilov

Journal of Materials Science· Volume 53· Issue 19
Publisher page

Abstract

Solid-state formation method of polyimide (PI) blends based on polyphenylene sulfide (PPS) and fluorinated ethylene propylene (FEP) was elaborated. Recycled thermoset PI powder was used as reinforcements. FEP/PI and PPS/PI blends were obtained by high-energy ball mill without using compatibilizer. PI content in blends was of 25, 50 or 75 wt%. Bulk samples were obtained by sintering at 330 °C during 25 min, with consequent disposition of sample into hot mold between two cold plates and loading the pressure of 20–35 MPa for 10 min. Morphology structure and thermal properties of powder blends were studied by tapped density measurements, DSC and XRD analyses. Thermal and mechanical properties of bulk samples were studied by DMA, hardness measurements and compressive tests. Strong chemical interaction between FEP matrix and PI filler was observed, whereas in case of PPS/PI samples nearly no interaction between components was found. Mechanical tests show that optimum filling degree for PPS/PI system is of 25 wt% PI, whereas in FEP/PI system it is of about 50 wt%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Synthesis and properties of polymers · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Nadkarni VM (1983) Polymer alloys: science and practice. Proc Indian Acad Sci (Chem Sci) 92:623–63710.1007/BF02844944 ↗
2. Robeson Lloyd (2014) Historical perspective of advances in the science and technology of polymer blends. Polymers 6:1251–126510.3390/polym6051251 ↗
3. Cavalieri F, Padella F (2002) Development of composite materials by mechanochemical treatment of post-consumer plastic waste. Waste Manag 22:913–91610.1016/S0956-053X(02)00084-3 ↗
4. Tagaya M, Motozuka S, Kobayashi T, Ikoma T, Tanaka J (2012) Efficient incorporation of monomeric anthracene into nanoporous silica/surfactant nanocomposite spheres using a mechanochemical solid state reaction. J Mater Chem 22:18741–1874310.1039/c2jm34155g ↗
5. Delogu F, Gorrasi G, Sorrentino A (2017) Fabrication of polymer nanocomposites via ball milling: present status and future perspectives. Prog Mater Sci 86:75–12610.1016/j.pmatsci.2017.01.003 ↗
6. Gorrasi G, Sorrentino A (2015) Mechanical milling as a technology to produce structural and functional bio-nanocomposites. Green Chem 17:2610–262510.1039/C5GC00029G ↗
7. Roumeli E, Paraskevopoulos KM, Bikiaris D, Chrissafis K (2013) Effect of high energy ball milling on the structure and mechanical properties of cross-linked high density polyethylene. J Mater Sci 48:6753–6761. https://doi.org/10.1007/s10853-013-7480-910.1007/s10853-013-7480-9 ↗
8. Bonadies I, Avella M, Avolio R, Carfagna C, Gentile G, Immirzi B, Errico ME (2012) Probing the effect of high energy ball milling on PVC through a multitechnique approach. Polym Test 31:176–18110.1016/j.polymertesting.2011.10.010 ↗
9. Budnik OA, Budnik AF, Berladir KV, Rudenko PV, Sviderskiy VA (2015) Influence of mechanical activation of polytetrafluoroethylene matrix of tribotechnical composites on its structural and phase transformations and properties. Funct Mater 22:499–50610.15407/fm22.04.499 ↗
10. Motozuka S, Tagaya M, Hotta Y, Morinaga M, Ikoma T (2013) Mechanochemical fabrication of carbon fiber/nylon-6 composites with interfacial bondings. Ind Eng Chem Res 52:2182–218910.1021/ie301333n ↗
11. Rashidi S, Ataie A (2016) Structural and magnetic characteristics of PVA/CoFe2O4 nano-composites prepared via mechanical alloying method. Mater Res Bull 80:321–32810.1016/j.materresbull.2016.04.021 ↗
12. Zhang X, Zhou Z, He X, Li J, Lu C (2012) Mechanochemical milling of PP/ground tire rubber blends in solid-state. IPP 27:427–43310.3139/217.2545 ↗
13. Cavalieri F, Padella F, Cataldo F (2003) Mechanochemical surface activation of ground tire rubber by solid-state devulcanization and grafting. J Appl Polym Sci 90:1631–163810.1002/app.12829 ↗
14. Silva LV, Angrizani CC, Souza JR, Amico SC, Medeiros JTN (2012) Use of polyester/glass-fiber residues as fillers for composites. J Appl Polym Sci 124:302–31010.1002/app.34873 ↗
15. Olmos D, Vela R, Alvarez-Junceda A, González-Benito J (2013) Rubber particles from tires out of use as toughness modifiers of epoxy-based thermosets. J Adhes 89:697–71310.1080/00218464.2012.752327 ↗
16. Li D, Qian G, Liu C, Wang D, Chen C, Zhao X (2015) Thermal, morphology, and mechanical properties of polyphenylene sulfide/polyether sulfone binary blends. J Appl Polym Sci 132:4170310.1002/app.41703 ↗
17. Rahate AS, Nemade KR, Waghuley SA (2013) Polyphenylene sulfide (PPS): state of the art and applications. Rev Chem Eng 29:471–48910.1515/revce-2012-0021 ↗
18. Qu J, Zhang Y, Tian X, Guo W (2014) Mechanical and tribological properties of ekonol blends as frictional materials of ultrasonic motors. Tribol Lett 56:387–39510.1007/s11249-014-0416-y ↗
19. Teng Hongxiang (2012) Overview of the development of the fluoropolymer industry. Appl Sci 2:496–51210.3390/app2020496 ↗
20. Chen B, Wang J, Yan F (2011) Friction and wear behaviors of several polymers sliding against GCr15 and 316 steel under the lubrication of sea water. Tribol Lett 42:17–2510.1007/s11249-010-9743-9 ↗
21. Crosby JM, Carreno CA, Talley KL (1982) Melt processible fluoropolymer composites. Polym Compos 3:97–10110.1002/pc.750030208 ↗
22. Liang JZ, Peng W, Wang KJ (2017) Dynamic rheological behavior of polyfluorinated ethylene propylene/polypropylene blend melts. J Thermoplast Compos Mater 30:273–28510.1177/0892705715598363 ↗
23. Deng S, Lin Z, Cao L, Xian J, Liu C (2015) PPS/recycled PEEK/carbon nanotube composites: structure, properties and compatibility. J Appl Polym Sci 132:4249710.1002/app.42497 ↗
24. Satou H, Makino D (1993) Polyimides for electronic applications A2. In: Wong CP (ed) Polymers for electronic and photonic application. Academic Press, San Diego, pp 221–24710.1016/B978-0-12-762540-9.50009-6 ↗
25. Zabolotskii S (2013) A review of the global polyimide market. Eurasian Chem Market 1:2–7
26. Dong Z, Shao H (1990) Method for recovering polyimide film waste. Patent CN1045800 (A)
27. Liu S, Tang Q (2014) Method of recovering polyimide raw material by hydrolyzing polyimide waste thin film by ammonia water. Patent CN103553906 (A)
28. Roach DH (2012) Polyimide based purge media and methods relating thereto. Patent US8309223 B2
29. Kanazawa C (2013) Polyimide powder, polyimide solution, and method for producing polyimide powder. Patent US20130289204 A1
30. Hidaka S, Ishikawa H, Machida H (2011) Manufacturing method for polyimide molded body. Patent WO2011079159 A1
31. Kim J-B (1994) Structure modification and sintering behaviors of infusible aromatic polyimide. Polym Korea 18:976–983
32. Karger-Kocsis J, Mészáros L, Bárány T (2013) Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers. J Mater Sci 48:1–38. https://doi.org/10.1007/s10853-012-6564-210.1007/s10853-012-6564-2 ↗
33. Hu D, Jia Z, Li J, Zhong B, Fu W, Luo Y, Jia D (2017) Characterization of waste printed circuit boards nonmetals and its reutilization as reinforcing filler in unsaturated polyester resin. J Polym Environ 26:1–9
34. Amico SC, Brostow W, Dutta M, Góral T, Medeiros JTN, Silva LVS, Juliana R (2012) Composites of polyester + glass fiber residues versus composites with mineral fillers. Compos Interfaces 19:511–52210.1080/15685543.2012.762197 ↗
35. Yin S, Tuladhar R, Shi F, Shanks RA, Combe M, Collister T (2015) Mechanical reprocessing of polyolefin waste: a review. Polym Eng Sci 55:2899–290910.1002/pen.24182 ↗
36. Yang S, Bai S, Wang Q (2016) Morphology, mechanical and thermal oxidative aging properties of HDPE composites reinforced by nonmetals recycled from waste printed circuit boards. Waste Manag 57:168–17510.1016/j.wasman.2015.11.005 ↗
37. Zhang SL, Xin ZX, Zhang ZX, Kim JK (2009) Characterization of the properties of thermoplastic elastomers containing waste rubber tire powder. Waste Manag 29:1480–148510.1016/j.wasman.2008.10.004 ↗
38. Chen S, Li J, Jin Y, Xiao J, Khosla T (2018) Fabrication of polyimide-modified UHMWPE composites and enhancement effect on tribological properties. Polym Plast Technol Eng 57:700–70710.1080/03602559.2017.1344854 ↗
39. Chen B, Wang J, Yan F (2012) Microstructure of PTFE-based polymer blends and their tribological behaviors under aqueous environment. Tribol Lett 45:387–39510.1007/s11249-011-9896-1 ↗
40. Mu L, Zhu J, Fan J, Zhou Z, Shi Y (2016) Self-lubricating polytetrafluoroethylene/polyimide blends reinforced with zinc oxide nanoparticles. J Nanomater 16:373–379
41. Min C, Liu D, Shen C, Zhang Q, Shen X, Zhang K (2017) Remarkable improvement of the wear resistance of poly(vinylidene difluoride) by incorporating polyimide powder and carbon nanofibers. Appl Phys A 123:63810.1007/s00339-017-1251-4 ↗
42. Wu X, Wei H, Zhu J, Fang X (2010) Study on thermal properties and crystallization behavior of blends of poly(phenylene sulfide)/poly(ether imide). Polym Plast Technol Eng 49:1506–151410.1080/03602559.2010.512328 ↗
43. Zhang R, Huang Y, Min M, Gao Y, Lu A, Lu Z (2008) Nonisothermal crystallization of polyamide 66/poly(phenylene sulfide) blends. J Appl Polym Sci 107:2600–260610.1002/app.27202 ↗
44. Xing J, Ni Q-Q, Deng B, Liu Q (2016) Morphology and properties of polyphenylene sulfide (PPS)/polyvinylidene fluoride (PVDF) polymer alloys by melt blending. Compos Sci Technol 134:184–19010.1016/j.compscitech.2016.08.020 ↗
45. Chae B, Kim YH, Jung YM, Han DH, Kim SB, Lee SW (2009) Spectroscopic and thermal degradation studies of polystyrene grafting onto poly(tetrafluoroethylene-co-hexafluoropropylene) films via electron-beam irradiation. Vib Spectrosc 51:72–7510.1016/j.vibspec.2008.10.012 ↗
46. Xie S, Zhang Z, Wei W (2007) Synthesis and properties of polyimide-based optical materials. J Korean Phys Soc 51:153610.3938/jkps.51.1536 ↗