Synthesis and characterization of soluble and meltable Zr-containing polymers as the single-source precursor for Zr(C, N) multinary ceramics
Source abstract
Abstract
Soluble and meltable Zr-containing preceramic polymers were synthesized in this work by the polymerization of ZrCl4 and different diamines, followed by preparation of Zr(C, N) multinary ceramics via pyrolysis. The composition, structure and morphology were investigated by Fourier transform infrared spectroscopy, nuclear magnetic resonance, as well as thermogravimetric-mass spectrometry, X-ray diffraction, elemental analysis, scanning electron microscopy (SEM) and transmission electron microscopy. Results showed that although the precursor could be formed by the reaction between Zr–Cl and N–H bonds, the ceramic yield was low due to the release of NH3 and CH4 gases during the ceramization process. To improve the ceramic yield, allyl amine was applied to tailor the polymer structure. With allyl groups acting as the “bridge” during crosslinking process, the precursor had a higher ceramic yield of 62.5% and melting point of 280–300 °C with Zr content of 49.7 wt% in the derived Zr(C, N) ceramics. Annealing experiments in an inert atmosphere at temperatures in the range of 1200–1400 °C showed the transformation of the amorphous state to dense polycrystalline ceramics. When temperature was increased to 2000 °C, the ceramics got quite dense without obvious phase separation. The precursors could be applied as promising candidates for non-oxide ceramic matrix composites and fibers at ultra-high temperatures and even in harsh environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Wie DMV, Drewry DG Jr, King DE (2004) The hypersonic environment: required operating conditions and design challenges. J Mat Sci 39:5915–592410.1023/B:JMSC.0000041688.68135.8b ↗
2. Monteverde F, Bellosi A, Scatteia L (2008) Processing and properties of ultra-high temperature ceramics for space applications. Mater Sci Eng A 485:415–42110.1016/j.msea.2007.08.054 ↗
3. Paul A, Jayaseelan DD, Venugopal S, Zapata-Solvas E, Binner J, Vaidhyanathan B et al (2012) UHTC composites for hypersonic applications. Am Ceram Soc Bull 91:22–28
4. Fahrenholtz WG, Hilmas GE, Talmy IG (2007) Refractory diborides of zirconium and hafnium. J Am Ceram Soc 90:1347–136410.1111/j.1551-2916.2007.01583.x ↗
5. Luo C, Duan W, Yin X, Kong J (2016) Microwave absorbing polymer-derived ceramics from cobalt coordinated poly(dimethylsilylene)diacetylenes. J Phys Chem C 120:18721–1873210.1021/acs.jpcc.6b03995 ↗
6. Wang X, Liu J, Hou F, Hu J, Sun X (2015) Synthesis of ZrC–SiC powders from hybrid liquid precursors with improved oxidation resistance. J Am Ceram Soc 98:197–20410.1111/jace.13274 ↗
7. Wang H, Gao B, Chen X, Wang J, Chen S, Gou Y (2013) Synthesis and pyrolysis of a novel preceramic polymer PZMS from PMS to fabricate hightemperature-resistant ZrC/SiC ceramic composite. Appl Organomet Chem 27:166–17310.1002/aoc.2959 ↗
8. Li H, Gou Y, Chen S, Wang H (2017) Preparation and properties of a novel precursor-derived Zr–C–B–N composite ceramic via zirconocene and borazine. Cer Int 44:4097–410410.1016/j.ceramint.2017.11.208 ↗
9. Zhai S, Park SS, Park M, Ullah MH, Ha C (2007) Direct synthesis of Zr-containing hybrid periodic mesoporous organosilicas with tunable zirconium content. Eur J Inorg Chem 2007:5480–548810.1002/ejic.200700775 ↗
10. Ma H, Liu H, Zhao J, Xu F, Zhang G (2015) Pressureless sintering, mechanical properties and oxidation behavior of ZrB2 ceramics doped with B4C. J Eur Ceram Soc 35:2699–270510.1016/j.jeurceramsoc.2015.03.030 ↗
11. Chu A, Qin M, Rafiuddin Zhang L, Lu H, Jia B, Qu X (2013) Carbothermal synthesis of ZrC powders using a combustion synthesis precursor. Int J Ref Met H Mat 36:204–21010.1016/j.ijrmhm.2012.08.016 ↗
12. Ionescu E, Linck C, Fasel C, Muller M, Kleebe HJ, Riedel R (2010) Polymer-derived SiOC/ZrO2 ceramic nanocomposites with excellent high-temperature stability. J Am Ceram Soc 93:241–25010.1111/j.1551-2916.2009.03395.x ↗
13. Walker LS, Corral EL (2014) Structural Influence on the thermal conversion of self-catalyzed HfB2/ZrB2 sol–gel precursors by rapid ultrasonication of oxychloride hydrates. J Am Ceram Soc 97:399–40610.1111/jace.12694 ↗
14. Wang H, Chen X, Gao B, Wang J, Wang Y, Chen S, Gou Y (2013) Synthesis and characterization of a novel precursor-derived ZrC/ZrB2 ultra-hightemperature ceramic composite. Appl Organomet Chem 27:79–8410.1002/aoc.2943 ↗
15. Yamaok H, Ishikawa T, Kumagawa K (1999) Excellent heat resistance of Si–Zr–C–O Fibre. J Mater Sci 34:1333–1339. https://doi.org/10.1023/A:100450630075410.1023/A:1004506300754 ↗
16. Chen S, Gou Y, Wang H, Jian K, Wang J (2017) Preparation and characterization of high-temperature resistant ZrC-ZrB2 nanocomposite ceramics derived from single-source precursor. Mater Design 117:257–26410.1016/j.matdes.2016.12.041 ↗
17. Chen S, Gou Y, Wang H, Wang J (2016) Fabrication and characterization of precursor-derived non-oxide ZrC–SiC multiphase ultrahigh temperature ceramics. J Eur Ceram Soc 36:3843–385010.1016/j.jeurceramsoc.2016.06.047 ↗
18. Itatani K, Hattori K, Harima D (2001) Mechanical and thermal properties of siliconcarbide composites fabricated with short Tyranno® Si–Zr–CO fibre. J Mater Sci 36:3679–3686. https://doi.org/10.1023/A:101790943003710.1023/A:1017909430037 ↗
19. Cai T, Qiu W, Liu D, Han W, Ye L, Zhao A, Zhao T (2013) Synthesis of soluble poly-yne polymers containing zirconium and silicon and corresponding conversion to nanosized ZrC/SiC composite ceramics. Dalton Trans 42:4285–429010.1039/c2dt32428h ↗
20. Williams K, Boydston A, Bielawski C (2007) Main-chain organometallic polymers: synthetic strategies, applications, and perspectives. Chem Soc Rev 36:729–74410.1039/b601574n ↗
21. Colombo P, Mera G, Riedel R, Soraru GD (2010) Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc 93:1805–183710.1111/j.1551-2916.2010.03876.x ↗
22. Liu C, Liu L, Yang S, Gao W, Xie Z (2002) A novel method to synthesize polyorganozircosilazane. Chin Chem Let 13:1225–1226
23. Pomogailo AD, Dzhardimalieva GI, Rozenberg AS, Kestelman VN (2007) Hafnium containing Nanocomposites. J Therm Com Mat 20:151–17410.1177/0892705707073092 ↗
24. Pope EJA, Hepp J, Kratsch KM (2007) Method for forming Hafnium carbide and Hafnium nitride ceramics and preceramic polymers. US 2007/0178038 A1
25. Ashiri R (2013) Detailed FT-IR spectroscopy characterization and thermal analysis of synthesis of barium titanate nanoscale particles through a newly developed process. Vib Spectrosc 66:24–2910.1016/j.vibspec.2013.02.001 ↗
26. Yao SH, Su YL, Kao WH, Cheng KW (2005) Wear behavior of DC unbalanced magnetron sputter deposited ZrCN films. Mater Lett 59:3230–323310.1016/j.matlet.2005.04.064 ↗
27. Braic M, Braic V, Balaceanu M, Zoita CN, Kiss A, Vladescu A, Popescu A, Ripeanu R (2011) Structure and properties of Zr/ZrCN coatings deposited by cathodic arc method. Mater Chem Phys 126:818–82510.1016/j.matchemphys.2010.12.036 ↗
28. Mathur S, Altmayer J, Shen H (2004) Nanostructured ZrO2 and Zr–C–N Coatings from Chemical Vapor Deposition of Metal-Organic Precursors. Z Anorg Allg Chem 630:2042–204810.1002/zaac.200400271 ↗
29. Ionescu E, Kleebe HJ, Riedel R (2012) Silicon-containing polymer-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties. Chem Soc Rev 41:5032–505210.1039/c2cs15319j ↗
30. Yive NSCK, Corriu RJP, Leclereq D, Mutin PH, Vioux A (1992) Thermogravimetric analysis/mass spectrometry investigation of the thermal conversion of organosilicon precursors into ceramics under argon and ammonia. 2. Poly (silazanes). Chem Mater 4:1263–127110.1021/cm00024a028 ↗
31. Modabberasl A, Kameli P, Ranjbar M, Salamati H, Ashiri R (2015) Fabrication of DLC thin films with improved diamond-like carbon character by the application of external magnetic field. Carbon 94:485–49310.1016/j.carbon.2015.06.081 ↗
32. Ionescu E, Papendorf B, Kleebe HJ (2012) Phase separation of a hafnium alkoxide-modified polysilazane upon polymer-to-ceramic transformation—A case study. J Eur Ceram Soc 32:1873–188110.1016/j.jeurceramsoc.2011.09.003 ↗
33. Ashiri R (2012) Analysis and characterization of phase evolution of nanosized BaTiO3 powder synthesized through a chemically modified sol–gel process. Metall Mater Trans A 43:4414–442610.1007/s11661-012-1242-1 ↗
34. Yan C, Liu R, Cao Y, Zhang C, Zhang D (2012) Carbothermal synthesis of submicrometer zirconium carbide from polyzirconoxane and phenolic resin by the facile one-pot reaction. J Am Ceram Soc 95:3366–336910.1111/j.1551-2916.2012.05456.x ↗
35. Pizon D, Charpentier L, Lucas R (2014) Oxidation behavior of spark plasma sintered ZrC–SiC composites obtained from the polymer-derived ceramics route. Cer Int 40:5025–503110.1016/j.ceramint.2013.08.105 ↗
36. Krutko D, Borzov M, Lemenovskii D, Dzhardimalieva G, Pomogailob A (2005) Synthesis and reactivity of metal-containing monomers. Part 59: preparation and polymerization transformations of vinyl and isopropenyl derivatives of hafnocene dichloride. Russ Chem Bull Int Ed 54:247–25110.1007/s11172-005-0244-1 ↗
37. Yuan J, Hapis S, Breitzke H, Xu Y, Fasel C, Kleebe HJ, Buntkowsky G, Riedel R, Ionescu E (2014) Single-source-precursor synthesis of hafnium-containing ultrahigh temperature ceramic nanocomposites (UHTC-NCs). Inorg Chem 53:10443–1045510.1021/ic501512p ↗