Local strain redistribution in a coarse-grained nickel-based superalloy subjected to shot-peening, fatigue or thermal exposure investigated using synchrotron X-ray Laue microdiffraction
Source abstract
Abstract
The Laue microdiffraction technique was used to investigate the strain field caused by the shot-peening operation and its redistribution after thermal hold or fatigue in a model nickel-based superalloy with an average grain size of 40$\mu$m. Micrometer and millimeter size mappings showed that the plastic deformation introduced by shot-peening in the whole sample partially relaxes after a thermal exposure at 450∘C and was fully redistributed by the fatigue of the material, except in the hardened layer close to the sample edge. Diffraction patterns permitted to measure separately the strains related to the average alloy ($\gamma$+$\gamma$′) and to the γ′ phase. No difference was observed between the two deviatoric strain fields. Even if there were small stresses in the inner part of the samples, the sensitivity of the Laue microdiffraction method was large enough to quantitatively characterize the crystal misorientations and the deviatoric strain redistributions. Useful data were provided not only at the grain scale but also at the mesoscopic scale, thus bridging the gap between the sin$^2$$\psi$ and Ortner’s methods used to determine residual stresses, respectively, in fine and single-grain microstructures. The obtained results are also of first interest for a quantitative comparison with HR-EBSD measurements in the scanning electron microscope. Energy coupled measurements with an energy-dispersive point detector were also performed to determine the full elastic strain tensors associated with the $\gamma$ and $\gamma$′ phases. We demonstrated that, for Ni-based superalloys, the accuracy on strains and stresses was, respectively, of the order of 1×10$−3$ and $250$ MPa for the diagonal components of tensors. The measurements suffered from the 150 eV resolution of the detector which made it difficult to the separate the energies of the $\gamma$ and $\gamma$′ phases. Owing to large crystal misorientations, the microdiffraction technique was not able to determine elastic strains and hardening in the highly deformed layer, where a large amount of plastic strain and a number of defects were accumulated. Some improvements are proposed to overcome these difficulties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High Temperature Alloys and Creep · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. McClung R (2007) A literature survey on the stability and significance of residual stresses during fatigue. Fatigue Fract Eng Mater Struct 30(3):173–20510.1111/j.1460-2695.2007.01102.x ↗
2. Antolovich D (2015) Microstructural aspects of fatigue in Ni-base superalloys. Philos Trans R Soc A 373(2038):1–3610.1098/rsta.2014.0128 ↗
3. Chaudonneret M (1993) A simple and efficient multiaxial fatigue damage model for engineering applications of macro-crack initiation. J Eng Mater Technol 115 115(4):373–37910.1115/1.2904232 ↗
4. Boittin G, Locq D, Rafray A, Caron P, Kanouté P, Gallerneau F, Cailletaud G (2012) Influence of $$\gamma \prime $$ γ ′ precipitate size and distribution on LCF behavior of a PM disk superalloy. In: Superalloys 2012. Wiley, pp 167–17610.1002/9781118516430.ch19 ↗
5. Korsunsky A (2005) The modelling of residual stresses due to surface peening using eigenstrain distributions. J Strain Anal Eng 40(8):817–82410.1243/030932405X30984 ↗
6. Cao W, Khadhraoui M, Brenier B, Guédou JY, Castex L (1994) Thermomechanical relaxation of residual stress in shot peened nickel base superalloy. Mater Sci Technol 10(11):947–95410.1179/mst.1994.10.11.947 ↗
7. Khadhraoui M, Cao W, Castex L, Guédou J (1997) Experimental investigations and modelling of relaxation behaviour of shot peening residual stresses at high temperature for nickel base superalloys. Mater Sci Technol 13(4):360–36710.1179/mst.1997.13.4.360 ↗
8. Evans A, Kim SB, Shackleton J, Bruno G, Preuss M, Withers P (2005) Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue. Int J Fatigue 27(10–12):1530–1534 fatigue Damage of Structural Materials V5th International Conference on Fatigue Damage of Structural Materials10.1016/j.ijfatigue.2005.07.027 ↗
9. John R, Buchanan D, Caton M, Jha S (2010) Stability of shot peen residual stresses in IN100 subjected to creep and fatigue loading. Procedia Eng 2(1):1887–189310.1016/j.proeng.2010.03.203 ↗
10. Stone H, Reed R, Holden T (1999a) Determination of the plane specific elastic constants of Waspaloy using neutron diffraction. Scr Mater 40(3):1797–180810.1016/S1359-6462(98)00437-0 ↗
11. Stone H, Holden T, Reed R (1999b) On the generation of microstrains during the plastic deformation of Waspaloy. Acta Mater 47(17):4435–444810.1016/S1359-6454(99)00314-6 ↗
12. Connor L, Stone H, Collins D, Preuss M, Hardy M, Rae C (2014) The effect of cooling rate from solution on the lattice misfit during isothermal aging of a Ni-base superalloy. Metall Mater Trans A 45(5):2436–244410.1007/s11661-014-2197-1 ↗
13. Preuss M, da Fonseca JQ, Grant B, Knoche E, Moat R, Daymond M (2008) The effect of $$\gamma \prime $$ γ ′ particle size on the deformation mechanism in an advanced polycrystalline nickel-base superalloy. Proceedings of superalloys 2008
14. Buchanan D, John R (2008) Relaxation of shot-peened residual stresses under creep loading. Scr Mater 59(3):286–28910.1016/j.scriptamat.2008.03.021 ↗
15. Child D, West G, Thomson R (2011) Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques. Acta Mater 59(12):4825–483410.1016/j.actamat.2011.04.025 ↗
16. Foss B, Gray S, Hardy M, Stekovic S, McPhail D, Shollock B (2013) Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000. Acta Mater 61(7):2548–255910.1016/j.actamat.2013.01.031 ↗
17. Messé O, Stekovic S, Hardy M, Rae C (2014) Characterization of plastic deformation induced by shot-peening in a Ni-base superalloy. JOM 66(12):2502–251510.1007/s11837-014-1184-8 ↗
18. Viereck D, Lhe D, Vhringer O, Macherauch E (1991) Relaxation of residual stresses in nickel-base superalloy due to dislocation creep. In: International conference of strength of metals and alloys 9, Freund Publishing, pp 14–19
19. Musinski W, McDowell D (2015) On the eigenstrain application of shot-peened residual stresses within a crystal plasticity framework: application to Ni-base superalloy specimens. Int J Mech Sci 100:195–20810.1016/j.ijmecsci.2015.06.020 ↗
20. Barabash R, Ice G (2014) Strain and dislocation gradients from diffraction: spatially-resolved local structure and defects. Imperial College Press, London10.1142/p897 ↗
21. Kang K, Yao N, He M, Evans A (2003) A method for in situ measurement of the residual stress in thin films by using the focused ion beam. Thin Solid Films 443(1):71–7710.1016/S0040-6090(03)00946-5 ↗
22. Korsunsky AM, Sebastiani M, Bemporad E (2009) Focused ion beam ring drilling for residual stress evaluation. Mater Lett 63(22):1961–196310.1016/j.matlet.2009.06.020 ↗
23. Salvati E, Lunt A, Ying S, Sui T, Zhang H, Heason C, Baxter G, Korsunsky A (2017) Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade. Comput Methods Appl Mech Eng 320(Supplement C):335–35110.1016/j.cma.2017.03.005 ↗
24. Benedetti M, Fontanari V, Winiarski B, Allahkarami M, Hanan J (2016) Residual stresses reconstruction in shot peened specimens containing sharp and blunt notches by experimental measurements and finite element analysis. Int J Fatigue 87(Supplement C):102–11110.1016/j.ijfatigue.2016.01.020 ↗
25. Müller EMP (1961) Das sin $$^2\psi $$ 2 ψ -verfahren der röntgenographischen spannungsmessung. Z Angew Phys 13(7):305–312
26. Ortner B (1983) Rontgenographische spannungsmessung an einkristallinen proben. In: Eingenspannungen, Deutsche Gesellschaft fur Metallkunde, Oberursel, pp 49–68
27. Ortner B (1985) The choice of lattice planes in X-ray strain measurements of single crystals. Adv X-Ray Anal 29:113–118
28. Morançais A, Fèvre M, François M, Guel N, Kruch S, Kanouté P, Longuet A (2015) Residual stress determination in a shot-peened nickel-based single-crystal superalloy using X-ray diffraction. J Appl Cryst 48(6):1761–177610.1107/S1600576715017689 ↗
29. Wlodek S, Kelly M, Alden D (1992) The structure of N18. In: SD Antolovich RM RW Stusrud (ed) Superalloys 1992, Wiley, pp 467–47110.7449/1992/Superalloys_1992_467_476 ↗
30. Ulrich O, Biquard X, Bleuet P, Geaymond O, Gergaud P, Micha JS, Robach O, Rieutord F (2011) A new white beam X-ray microdiffraction setup on the BM32 beamline at the European Synchrotron Radiation Facility. Rev Sci Instr 82(3):033,90810.1063/1.3555068 ↗
31. Robach O, Micha JS, Ulrich O, Gergaud P (2011) Full local elastic strain tensor from Laue microdiffraction: simultaneous Laue pattern and spot energy measurement. J Appl Cryst 44(4):688–69610.1107/S002188981102320X ↗
32. Micha JS, Robach O (2010). http://sourceforge.net/projects/lauetools/
33. Larson B, Yang W, Ice G, Budai J, Tischler J (2002) Three-dimensional X-ray structural microscopy with submicrometre resolution. Nature 415(6874):887–89010.1038/415887a ↗
34. Yang W, Larson B, Tischler J, Ice G, Budai J, Liu W (2004) Differential-aperture X-ray structural microscopy: a submicron-resolution three-dimensional probe of local microstructure and strain. Micron 35(6):431–43910.1016/j.micron.2004.02.004 ↗
35. Chung J, Ice G (1999) Automated indexing for texture and strain measurement with broad-bandpass X-ray microbeams. J Appl Phys 86(9):5249–525510.1063/1.371507 ↗
36. Hofmann F, Eve S, Belnoue J, Micha JS, Korsunsky A (2011) Analysis of strain error sources in micro-beam Laue diffraction. Nucl Instrum Methods A 660(1):130–13710.1016/j.nima.2011.09.009 ↗
37. Ice G, Chung J, Lowe W, Williams E, Edelman J (2000) Small-displacement monochromator for microdiffraction experiments. Rev Sci Instrum 71(5):2001–200610.1063/1.1150568 ↗
38. Send S, von Kozierowski M, Panzner T, Gorfman S, Nurdan K, Walenta AH, Pietsch U, Leitenberger W, Hartmann R, Strüder L (2009) Energy-dispersive Laue diffraction by means of a frame-store pnCCD. J Appl Cryst 42(6):1139–114610.1107/S0021889809039867 ↗
39. Robach O, Micha JS, Ulrich O, Geaymond O, Sicardy O, Härtwig J, Rieutord F (2013) A tunable multicolour ‘rainbow’ filter for improved stress and dislocation density field mapping in polycrystals using X-ray Laue microdiffraction. Acta Cryst A 69(2):164–17010.1107/S0108767313000172 ↗
40. Lautridou JC, Guédou JY (1994) Heat treatment upgrading on PM superalloy N18 for high temperature applications. In: Coutsouradis D, et al (eds) Materials for advanced power engineering, Part II. Kluwer Academic Publishers, Dordrecht, pp 951–960
41. Honnorat Y (1991) N18, damage tolerant nickel-based superalloy for military aircraft turbine discs. Mater Tech 79(5–6):19–3010.1051/mattech/199179050019 ↗
42. Chao J, Mark A, Fuller MS, McIntyre NS, Holt R, Klassen R, Liu W (2009) Study of residual elastic- and plastic-deformation in uniaxial tensile strained nickel-based alloy 600 samples by polychromatic X-ray microdiffraction (PXM) and neutron diffraction methods. Mater Sci Eng A 524(1–2):20–2710.1016/j.msea.2009.05.033 ↗
43. Wright S, Nowell M, Basinger J (2012) Angular precision of automated electron backscatter diffraction measurements. In: Textures of materials—ICOTOM 16, Trans Tech Publications, Materials Science Forum, vol 702, pp 548–553
44. Brough I, Bate PS, Humphreys FJ (2006) Optimising the angular resolution of EBSD. Mater Sci Technol 22(11):1279–128610.1179/174328406X130902 ↗
45. Altinkurt G, Fèvre M, Robach O, Micha JS, Geandier G, Dehmas M (2017) Full elastic strain tensor determination at the phase scale in a powder metallurgy nickel-based superalloy using X-ray Laue microdiffraction. J Appl Cryst 50(6):1754–176510.1107/S1600576717014558 ↗
46. Salvati E, Korsunsky AM (2017) An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling. Int J Plast 98:123–13810.1016/j.ijplas.2017.07.004 ↗
47. Voigt W (1928) Lehrbuch der Kristallphysik. Teubner
48. Reuss A (1929) Berechnung der Fliessgrenze von Mischkristallen auf Grund Plastizitätsbedingung für Einkristalle. ZAMM-Z Angew Math Mech 9(1):49–5810.1002/zamm.19290090104 ↗