Investigation of rheological and corrosion properties of graphene-based eutectic salt
Source abstract
Abstract
This work investigates the rheological and corrosion properties of eutectic salt and graphene (GE) dispersed in eutectic salt. The base eutectic salt was prepared by mixing 41% CsNO3, 24.75% Ca(NO3)2, 21.25% KNO3, 7.34% LiNO3 and 5.66% NaNO3 by weight. Later, GE-based eutectic salt was prepared by dispersing 0.01, 0.05 and 0.1 wt% of GE in the eutectic salt. It was observed that doping of GE has significantly enhanced the viscosity of base eutectic salt. This enhancement in GE-dispersed eutectic salt is mainly due to the presence of GE sheet network in the eutectic salt. Moreover, non-Newtonian behavior was observed for GE-dispersed eutectic salts at 70, 80 and 90 °C, whereas at 200 °C it behaves as a Newtonian fluid. Furthermore, corrosion studies were performed to analyze the effects of eutectic salt and GE-dispersed eutectic salt on copper and stainless steel (SS304). Fourier transform infrared spectrometer result shows that the presence of all nitrate bonds in synthesized base salt and GE-dispersed base salt. X-ray diffraction depicts that the doping of GE in eutectic salt does not alter the crystal structure of nitrate salts. Results from EDX show uniform corrosion for SS304 with increasing GE concentration in eutectic base salt, while copper exhibited increase in corrosion rate with increasing GE concentration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · High voltage insulation and dielectric phenomena · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Ahmed SF, Khalid M, Rashmi W, Chan A, Shahbaz K (2017) Recent progress in solar thermal energy storage using nanomaterials. Renew Sustain Energy Rev 67:450–46010.1016/j.rser.2016.09.034 ↗
2. Jung J-Y, Oh H-S, Kwak H-Y (2009) Forced convective heat transfer of nanofluids in microchannels. Int J Heat Mass Transf 52:466–47210.1016/j.ijheatmasstransfer.2008.03.033 ↗
3. Arthur O, Karim MA (2016) An investigation into the thermophysical and rheological properties of nanofluids for solar thermal applications. Renew Sustain Energy Rev 55:739–75510.1016/j.rser.2015.10.065 ↗
4. Jung S (2012) Numerical and experimental investigation of inorganic nanomaterials for thermal energy storage (TES) and concentrated solar power (CSP) applications. Doctoral dissertation, Texas A&M University
5. Sundar LS, Sharma KV, Naik MT, Singh MK (2013) Empirical and theoretical correlations on viscosity of nanofluids: a review. Renew Sustain Energy Rev 25:670–68610.1016/j.rser.2013.04.003 ↗
6. Mahbubul IM, Saidur R, Amalina MA (2012) Latest developments on the viscosity of nanofluids. Int J Heat Mass Transf 55:874–88510.1016/j.ijheatmasstransfer.2011.10.021 ↗
7. Einstein A (1956) Eine neuw Bestimmung der Molekuldimensionen, Ann Phys 19(1906): 289–306. English translation in Investigation on the theory of Brownian motion, Dover, New York10.1002/andp.19063240204 ↗
8. Soleimani Dorcheh A, Durham RN, Galetz MC (2016) Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C. Sol Energy Mater Sol Cells 144:109–11610.1016/j.solmat.2015.08.011 ↗
9. Kruizenga A, Gill D (2014) Corrosion of iron stainless steels in molten nitrate salt. Energy Procedia 49:878–88710.1016/j.egypro.2014.03.095 ↗
10. Pineau A, Antolovich SD (2015) High temperature fatigue: behaviour of three typical classes of structural materials. Mater High Temp 32:298–31710.1179/0960340914Z.00000000072 ↗
11. Raade J, Elkin B (2013) Thermal energy storage with molten salt. Google Patents
12. Ghadimi A, Metselaar IH (2013) The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid. Exp Thermal Fluid Sci 51:1–910.1016/j.expthermflusci.2013.06.001 ↗
13. Norwitz G, Chasan DE (1968) Application of infrared spectroscopy to the analysis of inorganic nitrates. Test report T68-7-1. Quality Assurance Directorate, Frankford Arsenal, Philadelphia
14. ASTM D130-12 (2012) Standard test method for corrosiveness to copper from petroleum products by copper strip test. ASTM International, West Conshohocken
15. Mortazavi F, Banerjee D (2016) Review of molten salt nanofluids. V001T03A1110.1115/HT2016-7316 ↗
16. Yang Y, Oztekin A, Neti S, Mohapatra S (2012) Particle agglomeration and properties of nanofluids. J Nanopart Res 14:85210.1007/s11051-012-0852-2 ↗
17. Mehrali M, Sadeghinezhad E, Latibari ST, Kazi SN, Mehrali M, Zubir MNBM et al (2014) Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets. Nanoscale Res Lett 9:1–1210.1186/1556-276X-9-15 ↗
18. Mehrali M, Latibari ST, Mehrali M, Indra Mahlia TM, Cornelis Metselaar HS, Naghavi MS et al (2013) Preparation and characterization of palmitic acid/graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material. Appl Therm Eng 61:633–64010.1016/j.applthermaleng.2013.08.035 ↗
19. Myers PD Jr, Alam TE, Kamal R, Goswami DY, Stefanakos E (2016) Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer. Appl Energy 165:225–23310.1016/j.apenergy.2015.11.045 ↗
20. Ruiz ML, Lick ID, Ponzi MI, Rodriguez-Castellón E, Jiménez-López A, Ponzi EN (2011) Combustion of diesel soot in NO/O2 presence. Cesium nitrate and gold catalysts. Appl Catal A 392:45–5610.1016/j.apcata.2010.10.024 ↗
21. Renganayaki V (2011) Effect of potassium nitrate on the optical and structural properties of l-Histidine Acetate single crystals. Int J ChemTech Res 3:1454–1461
22. Sulaiman M, Dzulkarnain NA, Rahman AA, Mohamed NS (2012) Sol–gel synthesis and characterization of LiNO3–Al2O3 composite solid electrolyte. Solid State Sci 14:127–13210.1016/j.solidstatesciences.2011.11.008 ↗
23. Song YC, Eom HJ, Jung HJ, Malek MA, Kim HK, Geng H et al (2013) Investigation of aged Asian dust particles by the combined use of quantitative ED-EPMA and ATR-FTIR imaging. Atmos Chem Phys 13:3463–348010.5194/acp-13-3463-2013 ↗
24. Lai C-C, Chang W-C, Hu W-L, Wang ZM, Lu M-C, Chueh Y-L (2014) A solar-thermal energy harvesting scheme: enhanced heat capacity of molten HITEC salt mixed with Sn/SiOx core-shell nanoparticles. Nanoscale 6:4555–455910.1039/c3nr06810b ↗
25. Xiao J, Huang J, Zhu P, Wang C, Li X (2014) Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material. Thermochim Acta 587:52–5810.1016/j.tca.2014.04.021 ↗
26. Smirnov P, Yamagami M, Wakita H, Yamaguchi T (1997) An X-ray diffraction study on concentrated aqueous calcium nitrate solutions at subzero temperatures. J Mol Liq 73:305–31610.1016/S0167-7322(97)00075-5 ↗
27. Soibam I, Nilima N, Phanjoubam S (2014) Dielectric studies of double sintered lithium zinc nickel ferrite prepared by citrate precursor method. Am J Mater Sci Eng 2:24–27
28. Ostreng E, Vajeeston P, Nilsen O, Fjellvag H (2012) Atomic layer deposition of lithium nitride and carbonate using lithium silylamide. RSC Adv 2:6315–632210.1039/c2ra20731a ↗
29. Sun LW, Li LX, Tang CM (2016) Comparative study on catalytic performance of the production of 2,3-pentanedione from lactic acid condensation over SiO2-supported alkali metal nitrates. Acta Phys Chim Sin 32:2327–233610.3866/PKU.WHXB201606225 ↗
30. Ahmed O (2013) Corrosion behaviour of Aisi 304 stainless steel in contact with eutectic salt for concentrated solar power plant applications. Electronic Theses and Dissertations 2729. http://stars.library.ucf.edu/etd/2729