Deformation and recrystallization microtextures of an austenitic steel during asymmetrical hot rolling process
Source abstract
Abstract
Deformation and recrystallization microtextures during the asymmetrical hot rolling (ASHR) process were investigated for a high-Mn austenitic steel by means of electron backscattered diffraction. The effects of velocity ratio and rolling reduction on the texture evolution were also analyzed. It was found that with the increase in velocity ratio and rolling reduction, the surface layer of 60% rolled ASHR plate develops a shear texture containing the γ-fiber, rotated cube and rotated copper components, but in the central layer is still a fcc rolling texture with a minor rotation around the transverse direction. The formation of surface shear texture could be understood as a consequence of the increased shear strain level, and it followed some certain crystallographic rotational relationships with the fcc rolling texture components. Additionally, the change of deformation texture under ASHR condition had an influence on the recrystallization texture, in which the proportion of {112} and {113} orientations was slightly improved, due to their rapid growth advantage and the orientation heredity of rotated copper shear texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Grässel O, Krüger L, Frommeyer G, Meyer LW (2000) High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development-properties-application. Int J Plast 16:1391–140910.1016/S0749-6419(00)00015-2 ↗
2. Bouaziz O, Allain S, Scott CP, Cugy P, Barbier D (2011) High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships. Curr Opin Solid State Mater Sci 15:141–16810.1016/j.cossms.2011.04.002 ↗
3. Koyama M, Lee T, Lee CS, Tsuzaki K (2013) Grain refinement effect on cryogenic tensile ductility in a Fe–Mn–C twinning-induced plasticity steel. Mater Des 49:234–24110.1016/j.matdes.2013.01.061 ↗
4. Sasaki T, Watanabe K, Nohara K, Ono Y, Kondo N, Sato S (1982) Physical and mechanical properties of high manganese non-magnetic steel and its application to various products for commercial use. Trans ISIJ 22:1010–102010.2355/isijinternational1966.22.1010 ↗
5. Ma B, Li CS, Zheng JJ, Song YL, Han YH (2016) Strain hardening behavior and deformation substructure of Fe–20/27Mn–4Al–0.3C non-magnetic steels. Mater Des 92:313–32110.1016/j.matdes.2015.12.038 ↗
6. Tóth LS, Beausir B, Orlov D, Lapovok R, Haldar A (2012) Analysis of texture and R value variations in asymmetric rolling of IF steel. J Mater Process Technol 212:509–51510.1016/j.jmatprotec.2011.10.018 ↗
7. Kim WJ, Lee JB, Kim WY, Jeong HT, Jeong HG (2007) Microstructure and mechanical properties of Mg–Al–Zn alloy sheets severely deformed by asymmetrical rolling. Scr Mater 56:309–31210.1016/j.scriptamat.2006.09.034 ↗
8. Wronski S, Bacroix B (2014) Microstructure evolution and grain refinement in asymmetrically rolled aluminum. Acta Mater 76:404–41210.1016/j.actamat.2014.05.034 ↗
9. Lee JK, Lee DN (2008) Texture control and grain refinement of AA1050 Al alloy sheets by asymmetric rolling. Int J Mech Sci 50:869–88710.1016/j.ijmecsci.2007.09.008 ↗
10. Sidor J, Miroux A, Petrov R, Kestens L (2008) Microstructural and crystallographic aspects of conventional and asymmetric rolling processes. Acta Mater 56:2495–250710.1016/j.actamat.2008.01.042 ↗
11. Ma B, Li CS, Wang JK, Cai B, Sui FL (2016) Influence of asymmetric hot rolling on through-thickness microstructure gradient of Fe–20Mn–4Al–0.3C non-magnetic steel. Mater Sci Eng A 671:190–19710.1016/j.msea.2016.06.047 ↗
12. Roumina R, Sinclair CW (2008) Deformation geometry and through-thickness strain gradients in asymmetric rolling. Metall Mater Trans A 39:2495–250310.1007/s11661-008-9582-6 ↗
13. Oh KH, Jeong JS, Koo YM, Lee DN (2015) The evolution of the rolling and recrystallization textures in cold-rolled Al containing high Mn austenitic steels. Mater Chem Phys 161:9–1810.1016/j.matchemphys.2015.04.019 ↗
14. Kang SB, Min BK, Kim HW, Wilkinson DS, Kang J (2005) Effect of asymmetric rolling on the texture and mechanical properties of AA6111-aluminum sheet. Metall Mater Trans A 36:3141–314910.1007/s11661-005-0085-4 ↗
15. Su L, Lu C, Gazder AA, Saleh AA, Deng G, Tieu K et al (2014) Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness. J Alloys Compd 594:12–2210.1016/j.jallcom.2014.01.125 ↗
16. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena. Elsevier, Oxford
17. Akhiani H, Nezakat M, Sonboli A, Szpunar J (2014) The origin of annealing texture in a cold-rolled Incoloy 800H/HT after different strain paths. Mater Sci Eng A 619:334–34410.1016/j.msea.2014.09.093 ↗
18. Bracke L, Verbeken K, Kestensb LAI (2012) Texture generation and implications in TWIP steels. Scr Mater 66:1007–101110.1016/j.scriptamat.2012.02.048 ↗
19. Ghosh A, Gurao NP (2016) Effect of crystallographic texture on the planar anisotropy of ratcheting response in 316 stainless steel sheet. Mater Des 109:186–19610.1016/j.matdes.2016.07.079 ↗
20. Bracke L, Verbeken K, Kestens L, Penning J (2009) Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel. Acta Mater 57:1512–152410.1016/j.actamat.2008.11.036 ↗
21. Lü Y, Molodov DA, Gottstein G (2011) Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloy. Acta Mater 59:3229–324310.1016/j.actamat.2011.01.063 ↗
22. Saleh AA, Pereloma EV, Gazder AA (2011) Texture evolution of cold rolled and annealed Fe–24Mn–3Al–2Si–1Ni–0.06C TWIP steel. Mater Sci Eng A 528:4537–454910.1016/j.msea.2011.02.055 ↗
23. Sui FL, Wang X, Zhao J, Ma B, Li CS (2015) Analysis on shear deformation for high manganese austenite steel during hot asymmetrical rolling process using finite element method. J Iron Steel Res Int 22:990–99510.1016/S1006-706X(15)30101-1 ↗
24. Montheillet F, Cohen M, Jonas JJ (1984) Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe. Acta Metall 32(11):2077–208910.1016/0001-6160(84)90187-1 ↗
25. Li S, Beyerlein IJ, Alexander DJ (2006) Characterization of deformation textures in pure copper processed by equal channel angular extrusion via route A. Mater Sci Eng A 431:339–34510.1016/j.msea.2006.06.022 ↗
26. Gazder AA, Torre FD, Gu CF, Davies CHJ, Pereloma EV (2006) Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion. Mater Sci Eng A 415:126–13910.1016/j.msea.2005.09.065 ↗
27. Gholinia A, Bate P, Prangnell PB (2002) Modelling texture development during equal channel angular extrusion of aluminum. Acta Mater 50:2121–213610.1016/S1359-6454(02)00055-1 ↗
28. Naghdy S, Kestens L, Hertelé S, Verleysen P (2016) Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing. Mater Charact 120:285–29410.1016/j.matchar.2016.09.012 ↗
29. Choi CH, Kwon JW, Oh KH, Lee DN (1997) Analysis of deformation texture inhomogeneity and stability condition of shear components in fcc metals. Acta Mater 45:5119–512810.1016/S1359-6454(97)00169-9 ↗
30. Guiglionda G, Borbely A, Driver JH (2004) Orientation-dependent stored energies in hot deformed Al–2.5%Mg and their influence on recrystallization. Acta Mater 52:3413–342310.1016/j.actamat.2004.03.037 ↗
31. Gobernado P, Petrov RH, Kestens LAI (2012) Recrystallized {311}<136> orientation in ferrite steels. Scr Mater 66:623–62610.1016/j.scriptamat.2012.01.056 ↗
32. Sanjari M, He Y, Hilinski EJ, Yue S, Kestens LAI (2016) Development of the {113} texture during the annealing of a skew cold rolled non-oriented electrical steel. Scr Mater 124:179–18310.1016/j.scriptamat.2016.07.005 ↗