Detrimental effect of powder processing on the thermoelectric properties of CoSi
Source abstract
Abstract
Cobalt monosilicide (CoSi) prepared by arc melting possesses a very high thermoelectric power factor of 60 μW cm−1 K−2 at room temperature. The high lattice thermal conductivity of CoSi, however, limits its thermoelectric efficiency. In this paper, powder processing technique was intentionally used to reduce the grain sizes of CoSi and thus suppress its lattice thermal conductivity. The effects on the thermoelectric properties of CoSi under various processing conditions were explored. The electrical resistivity is drastically increased, while the absolute Seebeck coefficient is decreased for the powder processed samples compared to the arc-melted one. The detrimental influence is attributed to the grain boundary defects produced during processing, which brings about an excessive energy filtering effect and hence induces a huge decrease in the absolute Seebeck coefficient. The lattice thermal conductivity of powder processed samples is reduced as expected. However, the reduction is always offset by the reduction in the mobility due to the similar mean free paths of electrons and phonons of CoSi. As a result, it may not be feasible to upgrade the thermoelectric performance of the CoSi system by powder processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · nanoparticles nucleation surface interactions · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Zhao LD, Tan G, Hao S, He J, Pei Y, Chi H, Wang H, Gong S, Xu H, Dravid VP, Uher C, Snyder GJ, Wolverton C, Kanatzidis MG (2016) Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe. Science 351:141–14410.1126/science.aad3749 ↗
2. Sun H, Lu X, Morelli DT (2016) Isovalent substitutes play in different ways: effects of isovalent substitution on the thermoelectric properties of CoSi0.98B0.02. J Appl Phys 120:03510710.1063/1.4959209 ↗
3. Bux SK, Fleurial JP, Kaner RB (2010) Nanostructured materials for thermoelectric applications. Chem Commun 46:8311–832410.1039/c0cc02627a ↗
4. Lan Y, Minnich AJ, Chen G, Ren Z (2010) Enhancement of thermoelectric figure-of-merit by a bulk nanostructuring approach. Adv Funct Mater 20:357–37610.1002/adfm.200901512 ↗
5. Vining CB (1991) A model for the high-temperature transport-properties of heavily doped n-type silicon-germanium alloys. J Appl Phys 69:331–34110.1063/1.347717 ↗
6. Zide JMO, Vashaee D, Bian ZX, Zeng G, Bowers JE, Shakouri A, Gossard AC (2006) Demonstration of electron filtering to increase the Seebeck coefficient in In(0.53)Ga(0.47)As/In(0.53)Ga(0.28)Al(0.19)As superlattices. Phys Rev B 74:20533510.1103/PhysRevB.74.205335 ↗
7. Heremans JP, Thrush CM, Morelli DT (2004) Thermopower enhancement in lead telluride nanostructures. Phys Rev B 70:11533410.1103/PhysRevB.70.115334 ↗
8. Sun H, Morelli DT, Kirkham MJ, Meyer HM III, Lara-Curzio E (2011) The role of boron segregation in enhanced thermoelectric power factor of CoSi1−x B x alloys. J Appl Phys 110:12371110.1063/1.3671066 ↗
9. Bux SK, Blair RG, Gogna PK, Lee H, Chen G, Dresselhaus MS, Kaner RB, Fleurial JP (2009) Nanostructured bulk silicon as an effective thermoelectric material. Adv Funct Mater 19:2445–245210.1002/adfm.200900250 ↗
10. Martin J, Nolas GS, Zhang W, Chen L (2007) PbTe nanocomposites synthesized from PbTe nanocrystals. Appl Phys Lett 90:22211210.1063/1.2745218 ↗
11. Euler F (1957) Simple geometric model for the effect of porosity on material constants. J Appl Phys 28:1342–134510.1063/1.1722648 ↗
12. Poudel B, Hao Q, Ma Y, Lan Y, Minnich A, Yu B, Yan X, Wang D, Muto A, Vashaee D, Chen X, Liu J, Dresselhaus MS, Chen G, Ren Z (2008) High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320:634–63810.1126/science.1156446 ↗
13. Minnich AJ, Dresselhaus MS, Ren ZF, Chen G (2009) Bulk nanostructured thermoelectric materials: current research and future prospects. Energy Environ Sci 2:466–47910.1039/b822664b ↗
14. Sun H, Lu X, Morelli DT (2013) Effects of Ni, Pd, and Pt substitutions on thermoelectric properties of CoSi alloys. J Electron Mater 42:1352–135710.1007/s11664-012-2211-6 ↗
15. Kishimoto K, Koyanagi T (2002) Preparation of sintered degenerate n-type PbTe with a small grain size and its thermoelectric properties. J Appl Phys 92:2544–254910.1063/1.1499206 ↗
16. Kuo YK, Sivakumar KM, Huang SJ, Lue CS (2005) Thermoelectric properties of the CoSi1−x Ge x alloys. J Appl Phys 98:12351010.1063/1.2149185 ↗
17. Sales BC, Delaire O, McGuire MA, May AF (2011) Thermoelectric properties of Co-, Ir-, and Os-doped FeSi alloys: evidence for strong electron-phonon coupling. Phys Rev B 83:12520910.1103/PhysRevB.83.125209 ↗
18. Morelli DT, Jovovic V, Heremans JP (2008) Intrinsically minimal thermal conductivity in cubic I–V–VI(2) semiconductors. Phys Rev Lett 101:03590110.1103/PhysRevLett.101.035901 ↗
19. Liu Y, Li SN, Wang ZZ (2012) Theoretical studies of elastic and thermodynamic properties of cubic B20 CoSi. Phys B 407:4700–470510.1016/j.physb.2012.08.028 ↗
20. Satyala N, Vashaee D (2012) Detrimental influence of nanostructuring on the thermoelectric properties of magnesium silicide. J Appl Phys 112:09371610.1063/1.4764872 ↗
21. Longhin M, Viennois R, Ravot D, Robin J, Villeroy B, Vaney J, Candolfi C, Lenoir B, Papet P (2015) Nanostructured CoSi obtained by spark plasma sintering. J Electron Mater 44:1963–196610.1007/s11664-014-3611-6 ↗
22. Lue CS, Kuo YK, Huang CL, Lai WJ (2004) Hole-doping effect on the thermoelectric properties and electronic structure of CoSi. Phys Rev B 69:12511110.1103/PhysRevB.69.125111 ↗