journal article·2002-02

Joining of ZrO2-4.5 wt% Y2O3 (Y-TZP) ceramics using nanocrystalline tape cast interlayers

B. G. Ravi, R. Chaim

Journal of Materials Science· Volume 37· Issue 4
Publisher page

Abstract

Nanocrystalline Y-TZP tape casts were used as interlayers to join conventional Y-TZP ceramic pellets. The joining experiments were performed by hot pressing at 1000°C to 1300°C under constant pressure of 55 MPa. Two types of joints were obtained with and without a nanocrystalline interlayer. At 1100°C, the successful joints were enabled only with the interlayer; four point bending test results revealed an average joint strength of 206 ± 10 MPa. The joint strength increased with the joining temperature. The specimens joined at 1300°C with an interlayer exhibited a joint strength of 613 ± 40 MPa, which is ∼96% of the strength of the ceramic pellets. The interlayer at the joint exhibited homogeneous and crack free microstructure and preserved its nanocrystalline nature at all temperatures. The advantage of the nanocrystalline interlayer for joining is pronounced at lower joining temperatures and most probably for pellets with large grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. L. CHEN, T. ROUXEL, R. CHAIM, H. VESTEGHEM and D. SHERMAN, Mater. Sci. Forum 243–245 (1997) 245.
2. F. GUTIERREZ-MORA, A. DOMINGUEZ-RODRIGUEZ, M. JIMENEZ-MELENDO, R. CHAIM and M. HEFETZ, NanoStructured Materials 11 (1999) 531.10.1016/S0965-9773(99)00339-6 ↗
3. M. J. MAYO, Materials & Design 14 (1993) 323.10.1016/0261-3069(93)90106-6 ↗
4. J. YE and A. A. DOMINGUEZ-RODRIGUEZ, Scripta Metall. Mater. 33 (1995) 441.10.1016/0956-716X(95)00206-B ↗
5. A. A. DOMINGUEZ-RODRIGUEZ, E. JIMENEZ-PIQUE and M. JIMENEZ-MELENDO, Scripta Mater. 39 (1998) 21.10.1016/S1359-6462(98)00115-8 ↗
6. T. H. CROSS and M. J. MAYO, NanoStructured Mater. 3 (1993) 163.10.1016/0965-9773(93)90074-L ↗
7. A. A. DOMINGUEZ-RODRIGUEZ, F. GUIBERTEAU and M. JIMENEZ-MELENDO, J. Mater. Res. 13 (1998) 1631.10.1557/JMR.1998.0224 ↗
8. T. NAGANO, H. KATO and F. WAKAI, J. Amer. Ceram. Soc. 73 (1990) 3476.10.1111/j.1151-2916.1990.tb06479.x ↗
9. F. GUTIERREZ-MORA, A. A. DOMINGUEZ-RODRIGUEZ, J. L. ROUTBORT, R. CHAIM and F. GUIBERTEAU, Scripta Mater. 41 (1999) 455.10.1016/S1359-6462(99)00190-6 ↗
10. Y. MOTOHASHI, T. SAKUMA and C. C. CHOU, in THERMEC' 97, Inter. Conf. On Thermomechanical Processing of Steels & Other Materials, 1997, edited T. Chandra and T. Sakai (The Minerals, Metals & Materials Society) p. 1999.
11. R. CHAIM and B. G. RAVI, J. Mater. Res. 15 (2000) 1724.10.1557/JMR.2000.0248 ↗
12. M. JIMENEZ-MELENDO, A. DOMINGUEZ-RODRIGUEZ and A. BRAVO-LEON, J. Amer. Ceram. Soc. 81 (1998) 2761.10.1111/j.1151-2916.1998.tb02695.x ↗
13. R. W. RICE, in “Advances in Ceramics,” Vol. 22, Fractography of Glasses and Ceramics, edited by J. R. Varner and V. D. Frechette (Am. Ceram. Soc. Inc., Ohio, 1988) p. 3.
14. D. M. OWEN and A. H. CHOKSHI, Acta Mater. 46 (1998) 667. Received 21 September 2000 and accepted 4 October 2001 81810.1016/S1359-6454(97)00251-6 ↗