journal article·2017-01Open access

Processing and consolidation of copper/tungsten

Ching-Fong Chen, Reeju Pokharel, Michael J. Brand, Eric L. Tegtmeier, Bjorn Clausen, David E. Dombrowski, T. L. Ickes, Ricardo A. Lebensohn

Journal of Materials Science· Volume 52· Issue 2

Abstract

We developed a copper/tungsten (Cu/W) composite for mesoscale Materials Science applications using the novel High-Energy Diffraction Microscopy (HEDM) technique. Argon-atomized copper powder was selected as the starting raw powder and screened to remove the extremely large particle fraction. Tungsten particles were collected by milling and screening the −325 mesh tungsten powder between 500 and 635 mesh sieves. Hot pressing of screened Cu powder was performed at 900 °C in Ar/4 %H2 atmosphere. XRD and ICP results show that the hot-pressed Cu sample consists of about 5 vol% Cu2O, which is caused by the presence of oxygen on the surface of the starting Cu powder. Hot pressing the copper powder in a pure hydrogen atmosphere was successful in removing most of the surface oxygen. This process was also implemented for hot pressing the Cu/W composite. The density of the Cu/W composites hot pressed at 950 °C in pure hydrogen was about 94 % of the theoretical density (TD). The hot-pressed Cu/W composites were further hot isostatic pressed at 1050 °C in argon atmosphere, which results in 99.6 % of the TD with the designed Cu grain size and W particle distribution. Tensile specimens with D-notch were machined using the wire EDM method. The processing and consolidation of these materials will be discussed in detail. The HEDM images are also showed and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Maire E, Bouaziz O, Di Michiel M, Verdu C (2008) Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Mater 56:4954–496410.1016/j.actamat.2008.06.015 ↗
2. Lauridsen EM, Dey SR, Fonda RW, Juul-Jensen D (2006) Nondestructive approaches for 3-D materials characterization. JOM 58:40–4410.1007/BF02748494 ↗
3. Oddershede J, Schmidt S, Poulsen HF, Margulies L, Wright J, Moscick M, Reimers W, Winther G (2011) Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction. Mater Charact 62:651–66010.1016/j.matchar.2011.04.020 ↗
4. Lauridsen EM, Schmidt S, Suter RM, Poulsen HF (2001) Tracking: a method for structural characterization of grains in powders or polycrystals. J Appl Cryst 34:744–75010.1107/S0021889801014170 ↗
5. Atkinson HV, Davies S (2000) Fundamental aspects of hot isostatic pressing: an overview. Metall Mater Trans A 31A:2981–300010.1007/s11661-000-0078-2 ↗
6. Chang L-S, Straumal B, Rabkin E, Lojkowski W, Gust W (2007) Hot isostatic pressing of Cu–Bi polycrystals with liquid-like grain boundary layers. Acta Mater 55:335–34310.1016/j.actamat.2006.08.030 ↗
7. Correia JB, Freitas P, Santos JA, Bessa Sousa J, Davies HA (2002) Magnetisation and magnetoresistance of a Cu-5%Co alloy produced via powder metallurgy. Key Eng Mater 230–232:110–11310.4028/www.scientific.net/KEM.230-232.110 ↗
8. Jech D, Sepulveda JL, Traversone A (1997) Process for making improved copper/tungsten composites. US Patent #: 5,686,676
9. Larson AC, Von Dreele RB (1986) General structure analysis system; Unpublished Report LAUR 86-748, National Laboratory, Los Alamos
10. Poulsen HF et al (2001) Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders. J Appl Crystallogr 34:751–75610.1107/S0021889801014273 ↗
11. Suter RM, Hennessy D, Xiao C, Lienert U (2006) Forward modeling method for microstructure reconstruction using X-ray diffraction microscopy: single crystal verification. Rev Sci Instrum 77:12390510.1063/1.2400017 ↗
12. Withers PJ, Preuss M (2012) Fatigue and damage in structural materials studied by X-ray tomography. Annu Rev Mater Res 42:81–10310.1146/annurev-matsci-070511-155111 ↗
13. ICSD; 172174 Cu2O. http://icsd.fiz-karlsruhe.de/icsd/
14. ICSD; 64699 Cu. http://icsd.fiz-karlsruhe.de/icsd/