Strain-rate sensitivity of scratch hardness and deformation mechanism in nanocrystalline Ni under micro-scratch testing
Source abstract
Abstract
To investigate the strain-rate sensitivity in nanocrystalline (NC) materials using a single experimental technique over a wide range of strain rate, the micro-scratch testing technique was selected to obtain consistent and systematic data of the strain-rate sensitivity in a fully dense, high purity, and well-characterized electrodeposited NC Ni sample. The scratch characterizations and mechanical properties of the sample under the different scratch velocities were discussed in details. First, some critical parameters under the micro-scratch testing, such as strain rates, scratch ditch widths, were confirmed. Then, the scratch hardness under the different scratch velocity was investigated. From the results, the sample exhibits strain-rate sensitive mechanical properties. Further, the average values of strain-rate sensitivity of the sample were calculated. The values increase with increasing scratch velocity, and exhibit higher values that are of the order of 0.03–0.1. The greater strain-rate sensitivity exponents indicate that the NC Ni samples have different fundamental physical deformation mechanisms. Finally, the fundamental physical deformation mechanism under scratch testing was inspected using SEM and TEM technique. From the SEM and TEM morphologies, the grain boundary dislocation pile-ups should be a carrier of plastic flow under scratch testing in the NC Ni sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Meyers MA, Mishr AA, Benson DJ (2006) Mechanical properties of nanocrystalline materials. Prog Mater Sci 51:427–55710.1016/j.pmatsci.2005.08.003 ↗
2. Schwaiger R, Moser B, Dao M, Chollacoop N, Suresh S (2003) Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel. Acta Mater 51:5159–517210.1016/S1359-6454(03)00365-3 ↗
3. Lu L, Li SX, Lu K (2001) An abnormal strain rate effect on tensile behavior in nanocrystalline copper. Scripta Mater 45:1163–116910.1016/S1359-6462(01)01138-1 ↗
4. Dalla Torre F, Van Swygenhoven H, Victoria M (2002) Nanocrystalline electrodeposited Ni: microstructure and tensile properties. Acta Mater 50:3957–397010.1016/S1359-6454(02)00198-2 ↗
5. Karimpoor AA, Erb U, Aust KT, Palumbo G (2003) High strength nanocrystalline cobalt with high tensile ductility. Scripta Mater 49:651–65610.1016/S1359-6462(03)00397-X ↗
6. Humphrey RT, Jankowski AF (2011) Strain-rate sensitivity of strength in macro-to-micro-to-nano crystalline nickel. Surf Coat Tech 206:1845–184910.1016/j.surfcoat.2011.08.010 ↗
7. Jia D, Ramesh KT, Ma E (2003) Effect of nanocrystalline and ultrafine grain sizes on constitutive behaviors and shear bands in iron. Acta Mater 51:3495–350910.1016/S1359-6454(03)00169-1 ↗
8. Zhou JQ, Zhu RT, Zhang ZZ (2008) Constitutive model for the mechanical behaviors of bcc and fcc nanocrystalline metals over a wide strain rate range. Mater Sci Eng, A 480:419–42710.1016/j.msea.2007.07.057 ↗
9. Ivanisenko Y, Werz T, Minkow A, Lohmiller J, Gruber PA, Kobler A, Kurmanaeva L, Fecht HJ (2013) Observation of shear band formation in nanocrystalline Pd–Au alloy during in situ SEM compression testing. J Mater Sci 48:6841–684710.1007/s10853-013-7490-7 ↗
10. Cheng S, Ma E, Wang YM, Kecskes LJ, Youssef KM, Kock CC, Trociewitz UP, Han K (2005) Tensile properties of in situ consolidated nanocrystalline Cu. Acta Mater 53:1521–153310.1016/j.actamat.2004.12.005 ↗
11. Zhu RT, Zhou JQ, Jiang H, Zhang DS (2010) Strain localization of fully dense nanocrystallie Ni sheet. J Mater Sci 45:759–76410.1007/s10853-009-3997-3 ↗
12. Chan T, Zhou Y, Brooks I, Palumbo G, Erb U (2014) Localized strain and heat generation during plastic deformation in nanocrystalline Ni and Ni–Fe. J Mater Sci 49:3847–385910.1007/s10853-014-8099-1 ↗
13. Yoo SH, Sudarshan TS, Sethuram K (1999) Consolidation and high strain rate mechanical behavior of nanocrystalline tantalum powder. Nanostruct Mater 12:23–2810.1016/S0965-9773(99)00059-8 ↗
14. Zhu RT, Zhang XX, Li YF, Zhou JQ (2013) Impact behavior and constitutive model of nanocrystalline Ni under high strain rate loading. Mater Des 49:426–43210.1016/j.matdes.2013.01.060 ↗
15. Nyakiti LO, Jankowski AF (2010) Characterization of strain rate sensitivity and grain boundary structure in nanocrystalline gold–copper alloys. Metall Mater Trans A 41:838–84710.1007/s11661-009-9996-9 ↗
16. Wu TW, Doerner MF, Oliver WC, Pharr GM, Brotzen FR (1990) Thin film stress and mechanical properties II. Mater Res Soc Symp Proc 188:p19110.1557/PROC-188-191 ↗
17. Barletta M, Gisario A, Lusvarghi L, Bolelli G, Rubino G (2008) On the combined use of scratch tests and CLA profilometry for the characterization of polyester powder coating: influence of scratch load and speed. Appl Surf Sci 254:7198–721410.1016/j.apsusc.2008.05.315 ↗
18. Conrad H (2003) Grain size dependence of the plastic deformation kinetics in Cu. Mater Sci Eng A 341:216–22810.1016/S0921-5093(02)00238-1 ↗
19. Asaro RJ, Suresh S (2005) Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins. Acta Mater 53:3369–338210.1016/j.actamat.2005.03.047 ↗
20. Zhou JQ, Li ZH, Zhu RT, Li YL, Zhang ZZ (2008) A mixtures-based model for the grain size dependent mechanical behavior of nanocrystalline materials. J Mater Process Tech 197:325–33610.1016/j.jmatprotec.2007.06.047 ↗