journal article·2007-09

Thermoplastic behavior of wood powder compacted materials

Tsunehisa Miki, Hiroyuki Sugimoto, Kozo Kanayama

Journal of Materials Science· Volume 42· Issue 18
Publisher page

Abstract

To investigate the possibility and problems in recycling techniques for wood powder compacted material (WPCM) obtained by steam compression, a dynamic mechanical thermal analysis (DMTA) was conducted in dry and wet conditions. The results obtained show that mechanical properties such as the static Young’s modulus and bending strength of WPCM increased with an increasing steam temperature up to 170 °C during the compression of the wood powder. It is emphasized that WPCM having a bending strength of 80 MPa with a Young’s modulus of 8 GPa can be prepared by steam compressing of wood powder only due to a auto-condensation of wood components. The DMTA showed that the relative storage Young’s modulus of WPCM dramatically decreased in water exposure by heating, although it slightly increased in the dry condition. This indicates that WPCM is softened under heat in the presence of water, but it becomes harder by heating without water. The loss tangent peaks showed that the softening behavior of WPCM seems to result from lignin. Consequently, it is thought that WPCM can be shaped by compressing in water, and after obtaining the desired shape, the drying process should be conducted to fix the shape and harden the WPCM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lignin and Wood Chemistry · Natural Fiber Reinforced Composites · Polymer Foaming and Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Yano H (2001) ibid 36:1939, doi: 10.1023/A:101759792451410.1023/A:1017597924514 ↗
2. Bledzki AK, Faruk O (2003) J Compos Mater 10:365
3. Kazayawoko M, Balatinecz JJ, Matuana LM (1999) ibid 34:6189
4. Revin VV, Kadimaliev DA, Shutova VV, Samuilov VD (2002) Appl Biochemi Microbiol 38:529
5. Luo S, Netravali AN (1999) ibid 34:3709, doi: 10.1023/A:100465950723110.1023/A:1004659507231 ↗
6. Lora Jairo H, Glasser Wolfgang G (2002) J Polym and Enviro 10:3910.1023/A:1021070006895 ↗
7. Earth-Wood (2006) In: A history of wood polymer composites. https://doi.org/www.earth-wood.com/HISTORY/HISTORY/Navigation.html , as in 2006
8. Miki T, Takakura N, Iizuka T, Yamaguchi K, Kanayama K (2004) In: Proceedings of the 2nd International Workshop on “Green” Composites, January 2004, organized by the Society of Materials Science of Japan (JSMS) 68
9. Miki T, Takakura N, Iizuka T, Yamaguchi K, Kanayama K (2003) J Mater Proces Tech 140:40710.1016/S0924-0136(03)00784-2 ↗
10. D. A. I. Goring, PULP AND PAPER MAGAZINE OF CANADA, (1963) T517
11. Salmen L (1984) ibid 19:3090, doi: 10:1007/BF0102698810.1007/BF01026988 ↗
12. Sadoh T (1981) Wood Sci and Tech 15(1):5710.1007/BF00366501 ↗
13. Hills WE, Rosa AN (1978) Holzforschung 32(2): 6810.1515/hfsg.1978.32.2.68 ↗
14. Ikuho Iida (1986) Mokuzai gakkaishi 32(6):472
15. Yuuzou Furuta, Hiroyuki Yano, Hiromu Kajita (1995) Mokuzai gakkashi 41(8):718