Effect of Nb + Ti coating on the wetting behavior, interfacial microstructure, and mechanical properties of Al/Al2O3 joints
Source abstract
Abstract
The subject of the work was to study the effect of Nb + Ti thin film deposited by PVD method on alumina substrates on the wetting behavior, bond strength properties, and structure of interface in the Al/Al2O3 joints. Applying the sessile drop method, the wetting behavior of molten Al (99,999%) on coated alumina substrates was studied in the temperature range between 953 and 1373 K under a vacuum of 0.2 mPa for 30 min of contact. The sessile drop samples were used to examine the interface structure, shear strength, and interfacial fracture toughness under the concentrated load. The introduction of the thin Nb + Ti film layer of 900 nm thickness: (1) greatly improves the wettability of alumina by molten Al at above 1223 K and the shear strength of Al/Al2O3 joints produced at 1223 K, (2) has positive effect on structure transformation in the interface and leads to fabrication of reliable metal–ceramic joints. Microstructural investigations of the interface indicated that the precipitates of Nb and Ti-rich intermetallic phases were formed at the Al/Al2O3 interface, which influenced strengthening of these joints. Hence a conclusion can be drawn that the interface structure influences the durability increase in Al/Al2O3 joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Gibson RF (1994) Principles of composite material mechanics. McGraw-Hill, New York
2. Nicholas MG, Mortimer DA (1985) Mater Sci Technol 1:65710.1179/mst.1985.1.9.657 ↗
3. Dalgleish BJ, Saiz E, Tomsia AP, Cannon RM, Ritche RO (1994) Scripta Metall Mater 31:1010
4. Naidich Yu, Gab I, Stetsyuk T, Kurkova D (2005) J Mater Sci 40:2477. doi: 10.1007/s10853-005-1978-810.1007/s10853-005-1978-8 ↗
5. Bronson A (1999) JOM 51:4310.1007/s11837-999-0208-2 ↗
6. Jadeon AK, Ralph B, Hornsby PR (2004) J Mater Process Technol 152:256
7. Saganuma K (1991) J Mater Sci 26:6144. doi: 10.1007/BF0111389710.1007/BF01113897 ↗
8. Eustathopoulos N, Drevet B (1994) J Phys 10:1866
9. Dawihl W, Federman H (1974) Aluminium 50:574
10. Li JG (1994) Ceram Int 20:39110.1016/0272-8842(94)90027-2 ↗
11. Javernik DA, Chidambaram PR, Edwards GR (1998) Metall Mater Trans A 29:32710.1007/s11661-998-0184-0 ↗
12. Sulima I, Mikulowski B (2007) Metall Mater Trans A 37:327510.1007/BF02586162 ↗
13. Ksiazek M, Sobczak N, Mikulowski B, Radziwill W, Surowiak I (2002) Mater Sci Eng A 324:91110.1016/S0921-5093(01)01305-3 ↗
14. Strecker A, Salzberger U, Mayer J (1993) Prakt Metalogr 30:482
15. Quinn DG, Bradt RC (2007) J Am Ceram Soc 90:67310.1111/j.1551-2916.2006.01482.x ↗
16. Sobczak N, Asthana R, Ksiazek M, Mikulowski B, Radziwill W (2004) Metall Mater Trans A 35:91110.1007/s11661-004-0016-9 ↗
17. Ksiazek M, Mikulowski B (2008) Ceramika/Ceramics 103/1:725
18. Laurent V, Chatain D, Chatillion M, Eustathopoulos N (1988) Acta Metall 36:179910.1016/0001-6160(88)90248-9 ↗
19. Raghavan V (2005) J Phase Equilib Diffus 26:36010.1007/s11669-005-0089-1 ↗
20. Lu YC, Sass SL, Bai Q, Kohlstedt DL, Gerberich T (1995) Acta Metall Mater 43:31