journal article·2011-05

Liquid–crystal azopolyamides with high thermal stability and inherent viscosity

Junlong Yao, Yanjiao You, Hai Liu, Lijie Dong, Chuanxi Xiong

Journal of Materials Science· Volume 46· Issue 10
Publisher page

Abstract

In order to get novel photochromic fiber-forming polyamides with liquid crystal (LC), high inherent viscosity and thermal stability properties, two linear azobenzene polyaramides were synthesized by alternative polycondensation reactions of trans-azobenzene-4,4′-dicarbonyl chloride with various diamine monomers without any substituents under low temperature. As expected, the resulting polyamides exhibit high degree of crystallinity (the highest value reaches 52%), inherent viscosity (the highest value reaches 4.26 dL/g), and thermal stability (≤5% weight loss at 350 °C) due to intensively intermolecular hydrogen bonding and extremely symmetric and rigid molecular structures, which were identified by FT-IR spectroscopy and elemental analysis. Moreover, important liquid crystal and photoisomerization properties for optical devices and photochromics fibers spinning are also observed in N,N-dimethylacetamide (DMAc) solutions due to the regular rigid structure and intermolecular hydrogen bonding. The synthesized azo polyamides are suitable for fiber spinning and can be applied in fields of potential optical techniques and novel anti-ultraviolet and photochromic fibers industry at wide temperature ranges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Liquid Crystal Research Advancements · Photochromic and Fluorescence Chemistry · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Ichimura K (2000) Chem Rev 100:184710.1021/cr980079e ↗
2. Eich M, Wendorff JH, Reck B, Ringsdorf H (1987) Markromol Chem Rapid Commun 8:5910.1002/marc.1987.030080111 ↗
3. Dobb MG, Mclntyre JE (1984) Adv Polym Sci 60:6110.1007/3-540-12994-4_2 ↗
4. Wu S, Yao S, She W, Luo D, Wang H (2003) J Mater Sci 38:401. doi: 10.1023/A:102187871050710.1023/A:1021878710507 ↗
5. Liu J, Zhang Q, Zhang J, Hou W (2005) J Mater Sci 40:4517. doi: 10.1007/s10853-005-1102-010.1007/s10853-005-1102-0 ↗
6. Maria CL, Danilo D, Raffaella O, Concita S, Mario B, Xavier AM, Rafael GB, Mirko C, Michael S, Mark JB (2007) J Mater Sci 42:7866. doi: 10.1007/s10853-007-1657-z10.1007/s10853-007-1657-z ↗
7. Yao J, You Y, Lei Y, Dong L, Xiong C, Sun Z (2009) J Polym Res 16:45510.1007/s10965-008-9248-5 ↗
8. Gong Y, Yang G (2010) J Mater Sci 45:5237. doi: 10.1007/s10853-010-4565-610.1007/s10853-010-4565-6 ↗
9. Zhu Q, Dong L, Niu Y, Xiong C, Liu Y, Liu J, Liu L, Shu B (2008) Polym Bull 61:56910.1007/s00289-008-0984-9 ↗
10. Irie M (1990) Adv Polym Sci 94:2710.1007/BFb0043060 ↗
11. Dong L, Liu L, Niu Y, Xiong C, Zhu Q, Liu Y (2009) J Wuhan Univ Technol Mater Sci Ed 24:59410.1007/s11595-009-4594-7 ↗
12. Liu JH, Yang PC, Chiu YH, Suda Y (2007) J Polym Sci Pol Chem 45:202610.1002/pola.21968 ↗
13. Al-Ghamdi RF, Fahmi MM, Mohamed NA (2006) Polym Degrad Stabil 91:153010.1016/j.polymdegradstab.2005.10.001 ↗
14. Jian L, Sherrington DC (1994) Adv Polym Sci 111:17710.1007/BFb0024129 ↗
15. Nemoto N, Miyata F, Kamiyama T, Nagase Y, Abe J, Shirai Y (1999) Macromol Chem Phys 200:230910.1002/(SICI)1521-3935(19991001)200:10<2309::AID-MACP2309>3.0.CO;2-D ↗
16. Huang DY, Zhang C, Dalton L, Weber WP (2000) J Polym Sci Pol Chem 38:54610.1002/(SICI)1099-0518(20000201)38:3<546::AID-POLA20>3.0.CO;2-A ↗
17. Agata Y, Kobayashi M, Kimura H, Takeishi M (2005) Polym Int 54:26010.1002/pi.1664 ↗
18. Faghihi K, Hagibeygi M (2003) Eur Polym J 39:230710.1016/S0014-3057(03)00178-2 ↗
19. Kondo F, Kakimi S, Kimura H, Takeishi M (1998) Polym Int 46:33910.1002/(SICI)1097-0126(199808)46:4<339::AID-PI35>3.0.CO;2-# ↗
20. SachindrapaI P, Ramasamy S, Nanjan MJ (1981) Polym Bull 5:417
21. Jadhav JY, Chavan NN, Ghatge ND (1984) Eur Polym J 20:100910.1016/0014-3057(84)90086-7 ↗
22. Jaycox GD (2006) J Polym Sci Pol Chem 44:20710.1002/pola.21149 ↗
23. Everlofa GJ, Jaycox GD (2000) Polymer 41:652710.1016/S0032-3861(99)00893-9 ↗
24. Jaycox GD (1998) Polymer 39:258910.1016/S0032-3861(97)00560-0 ↗
25. Thayumanaswamy SM, Rajendran V (2004) Polym Sci 93:1305
26. Grabiec E, Schab-Balcerzak E, Sek D, Sobolewska A, Miniewicz A (2004) Thin Solid Films 367:453
27. Matsunaga D, Tamaki T, Ichimura K (2003) J Mater Chem 13:155810.1039/b300254c ↗
28. Alazaroaie S, Toader V, Carlescu I, Kazmierski K, Scutaru D, Hurduc N, Simionescu CI (2003) Eur Polym J 39:133310.1016/S0014-3057(03)00002-8 ↗
29. Yu SC, Chan WK (1997) Macromol Rapid Commun 18:21310.1002/marc.1997.030180301 ↗
30. Wobkemeier M, Hinrichsen G (1989) Polym Bull 21:60710.1007/BF00264142 ↗