journal article·2009-01

Effect of reverse and cyclic shear on the work-hardening of AISI 430 stainless steel

Wellington Lopes, Elaine Carballo Siqueira Corrêa, Haroldo Béria Campos, Maria Teresa Paulino Aguilar, Paulo Roberto Cetlin

Journal of Materials Science· Volume 44· Issue 2
Publisher page

Abstract

Sheet metal forming commonly involves various processing steps leading to complex strain paths. The work hardening of the metal under these circumstances is different from that observed for monotonic straining. The effect of the strain path on the hardening of materials is usually studied through sequences of standard mechanical tests, and the shear test is especially well adapted to such studies in sheet forming. Shear straining covering Bauschinger and cyclic strain paths were used in the analysis of the hardening of AISI 430 stainless steel sheets. The tests were conducted at 0°RD, 45°RD, and 90°RD (Rolling Direction) and for three effective strain amplitudes. The results indicate that the material presents Bauschinger effects and strain hardening transients that are sensitive to the testing direction. In addition, the cyclic straining leads to an oscillating stress pattern for the forward and reverse shearing cycles, which depends on the deformation amplitude.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Nesterova EV, Bacroix B, Teodosiu (2001) Mater Sci Eng A 309–310:495. doi:https://doi.org/10.1016/S0921-5093(00)01639-710.1016/S0921-5093(00)01639-7 ↗
2. Dejmal I, Tirosh J, Shirizly A, Rubinsky L (2002) Int J Mech Sci 44:1245. doi:https://doi.org/10.1016/S0020-7403(02)00019-X10.1016/S0020-7403(02)00019-X ↗
3. Kobayashi S, Oh SI, Altan T (1988) Metal forming and the finite-element method. Oxford University Press, New York, USA
4. Lim TC, Ramakrishna S, Shang HM (1999) J Mater Process Technol 30:495. doi:https://doi.org/10.1016/S1359-8368(99)00015-310.1016/S1359-8368(99)00015-3 ↗
5. Karthik V, Comstock RJ Jr, Hershberger DL, Wagoner RH (2002) J Mater Process Technol 121:350. doi:https://doi.org/10.1016/S0924-0136(01)01219-510.1016/S0924-0136(01)01219-5 ↗
6. Doyle LE, Morris JL, Leach JL, Schrader GF (1978) Processos de Fabricacão e Materiais para Engenheiros, 2nd edn. Edgard Blücher, São Paulo, Brazil
7. Nakazima K, Kikuma T, Hasuka K (1968) Yamata Tech Rep 264:141
8. Gosh AK, Hecker SS, Keeler SP (1984) In: Dieter GE (ed) Workability testing techniques. American Society for Metal, Metals Park, London, England
9. Arrieux R (1997) J Mater Process Technol 64:25. doi:https://doi.org/10.1016/S0924-0136(96)02550-210.1016/S0924-0136(96)02550-2 ↗
10. Kuroda M, Tvergaard V (2000) Int J Mech Sci 42:867. doi:https://doi.org/10.1016/S0020-7403(99)00029-610.1016/S0020-7403(99)00029-6 ↗
11. Barlat F, Ferreira Duarte JM, Gracio JJ, Lopes AB, Rauch EF (2003) Int J Plast 19:1215. doi:https://doi.org/10.1016/S0749-6419(02)00020-710.1016/S0749-6419(02)00020-7 ↗
12. Wilson DV, Zandrahimi M, Roberts WT (1990) Metall Mater 38:215. doi:https://doi.org/10.1016/0956-7151(90)90051-H10.1016/0956-7151(90)90051-H ↗
13. Haddadi H, Bouvier S, Banu M, Maier C, Teodosiu C (2006) Int J Plast 22:2226. doi:https://doi.org/10.1016/j.ijplas.2006.03.01010.1016/j.ijplas.2006.03.010 ↗
14. Côrrea ECS, Aguilar MTP, Cetlin PR (2000) J Mater Sci Lett 779:781. doi:https://doi.org/10.1023/A:100676870605410.1023/A:1006768706054 ↗
15. Mazilkin AA, Straumal BB, Protasova SG, Dobatkin SV, Baretzky B (2008) J Mater Sci 3800:3805. doi:https://doi.org/10.1007/s.10853-007-2222-510.1007/s.10853-007-2222-5 ↗
16. Schmitt JH, Aernoudt E, Baudelet B (1985) Mater Sci Eng A 75:1310.1016/0025-5416(85)90173-9 ↗
17. Rauch EF, G’Sell C (1989) Mater Sci Eng A 111:71. doi:https://doi.org/10.1016/0921-5093(89)90199-810.1016/0921-5093(89)90199-8 ↗
18. Rauch EF, Gracio JJ, Barlat F (2007) Acta Mater 55:2939. doi:https://doi.org/10.1016/j.actamat.2007.01.00310.1016/j.actamat.2007.01.003 ↗
19. Vincze G, Rauch EF, Gracio JJ, Barlat F, Lopes AB (2005) Acta Mater 53:1005. doi:https://doi.org/10.1016/j.actamat.2004.10.04610.1016/j.actamat.2004.10.046 ↗
20. Lopes AB, Rauch EF, Gracio JJ (1999) Acta Mater 47:859. doi:https://doi.org/10.1016/S1359-6454(98)00417-010.1016/S1359-6454(98)00417-0 ↗
21. Wilson DV, Bate PS (1994) Acta Metall Mater 42:1099. doi:https://doi.org/10.1016/0956-7151(94)90127-910.1016/0956-7151(94)90127-9 ↗
22. Sillekens WH, Dautzenberg JH, Kals J (1991) Proc ‘International Institution for Production Research—CIRP’, vol 40, p 25510.1016/S0007-8506(07)61981-7 ↗
23. Corrêa ECS, Aguilar MTP, Silva EMP, Cetlin PR (2003) J Mater Process Technol 142:282. doi:https://doi.org/10.1016/S0924-0136(03)00575-210.1016/S0924-0136(03)00575-2 ↗
24. Jia WP, Fernandes JV (2003) Mater Sci Eng A 348:133. doi:https://doi.org/10.1016/S0921-5093(02)00630-510.1016/S0921-5093(02)00630-5 ↗
25. Boger RK, Wagoner RH, Barlat F, Lee MG, Chung K (2005) Int J Plast 21:2319. doi:https://doi.org/10.1016/j.ijplas.2004.12.00210.1016/j.ijplas.2004.12.002 ↗
26. Chung JH, Lee DN (1993) J Mater Sci 4704:4712. doi:https://doi.org/10.1007/BF0041426110.1007/BF00414261 ↗
27. Rauch EF (1992) Solid State Phenom 23:31710.4028/www.scientific.net/SSP.23-24.317 ↗
28. Bouvier S, Haddadi H, Levée P, Teodosiu C (2006) J Mater Process Technol 172:96. doi:https://doi.org/10.1016/j.jmatprotec.2005.09.00310.1016/j.jmatprotec.2005.09.003 ↗
29. Hu Z (1994) Acta Metall Mater 42:3481. doi:https://doi.org/10.1016/0956-7151(94)90480-410.1016/0956-7151(94)90480-4 ↗
30. Zandrahimi M, Platias S, Price D, Barrett D, Bate PS, Roberts WT, Wilson DV (1989) Metall Mater Trans A 20:247110.1007/BF02666682 ↗
31. Boger RK (2006) Non-monotonic strain hardening and its constitutive representation. Ph.D. thesis, Ohio State University, Ohio
32. Pinheiro IP, Barbosa R, Cetlin PR (2006) ISIJ Int 46:73410.2355/isijinternational.46.734 ↗
33. Pinheiro IP, Barbosa R, Cetlin PR (2007) Mater Sci Eng A 458:136. doi:https://doi.org/10.1016/j.msea.2006.12.04610.1016/j.msea.2006.12.046 ↗
34. Dirras GF, Duval JL, Swiatnicki W (1999) Mater Sci Eng A 263:85. doi:https://doi.org/10.1016/S0921-5093(98)01082-X10.1016/S0921-5093(98)01082-X ↗