Formation mechanism and coarsening behavior of fan-type structures in a new Ni–Cr–Co-based powder metallurgy superalloy
Source abstract
Abstract
The formation mechanism and coarsening behavior of fan-type structures in a new Ni–Cr–Co-based powder metallurgy superalloy were investigated by means of field scanning electron microscope, transmission electron microscope, electron backscattered diffraction, and differential scanning calorimetry. The results show that the fan-type structures consist of finger-shaped γ′ dendrites and γ matrix between them. They nucleate in the chemical segregation regions on grain boundaries and grow by diffusion. There are three types of solute atoms flow: (a) rapid diffusion along grain boundary; (b) the diffusion from supersaturated γ matrix to fan-type γ′ phases; and (c) short-distance diffusion from the previous formed γ′ phases at high temperature to γ′ phases formed at low temperature within the branches of fan-type structures. These γ′ dendrites are perpendicular to grain boundaries and grow asymmetrically, resulting in grain boundary serration. In addition, the fan-type structures coarsen within the γ′ depletion zone after the standard aging treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Larson JM, Volin TE, Larson FG (1977) Micro Sci 5:209
2. Furrer DU (1999) Scripta Mater 40:121510.1016/S1359-6462(99)00094-9 ↗
3. Furrer DU (2007) Proceeding of the eleventh international symposium on advanced superalloys-production and application CSM:192
4. Mitchell RJ, Li HY, Huang ZW (2009) J Mate Process Tech 209:101110.1016/j.jmatprotec.2008.03.008 ↗
5. Lu XD, Deng Q, Du JH, Qu JL, Zhuang JY, Zhong ZY (2009) J Alloy Compd 477:10010.1016/j.jallcom.2008.10.088 ↗
6. Lu XD, Du JH, Deng Q, Zhong ZY (2009) J Alloy Compd 486:19510.1016/j.jallcom.2009.07.020 ↗
7. Huang SC, Chang KM (1984) J Mater Sci 19:1220. doi: 10.1007/BF0112003210.1007/BF01120032 ↗
8. Dwarapureddy AK, Balikci E, Ibekwe S, Raman A (2008) J Mater Sci 43:1802. doi: 10.1007/s10853-007-2342-y10.1007/s10853-007-2342-y ↗
9. Lemsky J (2004) Assessment of NASA dual microstructure heat treatment method for multiple forging batch heat treatments. NASA-CR-212950, NASA. Glenn Research Center, Cleveland
10. Gabb TP, Gayda J (2005) Forging of advanced disk alloy LSHR. NASA-TM-213649, NASA. Glenn Research Center, Cleveland
11. Wu K, Liu GQ, Hu BF, Wu H, Zhang YW, Tao Y, Liu JT (2009) J Univ Sci Tech B 31:719 (in Chinese)
12. Morinaga M, Yukawa N, Adachi H (1984) J Phys Soc Jpn 53:65310.1143/JPSJ.53.653 ↗
13. Yukama N, Morinaga M, Murata Y, Ezaki H, Inouet S (1988) Superalloys, vol 225. TMS, Warrendale, pp 765–774
14. TTNI8 (2009) Thermotech Ni-based superalloys database Version 8.0”, ThermoTech, www.thermocalc.com
15. ASTM Standard E112, 2004e2 (2004) Standard test methods for determining average grain size. ASTM International, West Conshohocken. doi: 10.1520/E0112-96R04E02 . www.astm.org10.1520/E0112-96R04E02 ↗
16. Staron P, Kampmann R (2000) Acta Mater 48:70110.1016/S1359-6454(99)00398-5 ↗
17. Staron P, Kampmann R (2000) Acta Mater 48:71310.1016/S1359-6454(99)00399-7 ↗
18. Assadi H, Schroers J (2002) Acta Mater 50:8910.1016/S1359-6454(01)00319-6 ↗
19. Ricks RA, Porter AJ, Ecob RC (1983) Acta Metall 31:4310.1016/0001-6160(83)90062-7 ↗
20. Henry MF, Yoo YS, Yoon DY, Choi J (1993) Metall Trans A 24:173310.1007/BF02657848 ↗
21. Zhang JH, Yao XD, Zhang ZY, Li YA, Guan HR, Hu ZQ (1994) Acta Metall Sin 30:453 (in Chinese)
22. Yoo YS (2005) Scripta Mater 53:8110.1016/j.scriptamat.2005.03.022 ↗