Thermal stress analysis of cordierite materials subjected to thermal shock
Source abstract
Abstract
Cordierite disks were obtained by slip casting and sintering at 1,450 °C for 2 h. Sintered disks were indented at the center of one flat surface. The fracture strength of indented disks was measured in biaxial flexure. The critical temperature differential was determined by sudden cooling of the center of the indented surface at high temperature, using a high-velocity air jet at room temperature. The initial temperature was successively increased by 10 °C until crack propagation was detected with the naked eye. Temperature and stress distributions during air impinging were calculated by a finite element analysis. The heat transfer coefficient was estimated by fitting experimental temperature profiles. A radial variation of the coefficient that considers its increment beyond the stagnation region and a diminution toward the disk periphery was assumed. The calculated cordierite thermal stresses were analysed in relation to experimental data. Also, the comparison with alumina tested in similar conditions was included.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced machining processes and optimization · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Monroe DL, Wachtman JB Jr (1989) The mechanical properties of cordierite-mullite composites as a function of temperature. In: Proc. 1st Conf. of the European Ceram. Soc., Elsevier Applied Science, Amsterdam, p 18
2. Suzuki H, Ota K, Saito H (1988) J Mater Sci 23:1534. doi: 10.1007/BF0111568710.1007/BF01115687 ↗
3. Anderson RM, Gerhardt R, Wachtman JB Jr (1989) Adv Ceram 26:265
4. Suzuki H, Saito H (1992) J Eur Ceram Soc 9:36510.1016/0955-2219(92)90095-U ↗
5. Tomba Martinez AG, Cavalieri AL (2000) J Eur Ceram Soc 20:88910.1016/S0955-2219(99)00232-0 ↗
6. Tomba Martinez AG, Cavalieri AL (2001) Mater Res Bull 4:710.1590/S1516-14392001000100003 ↗
7. Tomba Martinez AG, Cavalieri AL (2001) J Eur Ceram Soc 21:120510.1016/S0955-2219(00)00340-X ↗
8. Tomba Martinez AG, Cavalieri AL (2002) J Am Ceram Soc 85:92110.1111/j.1151-2916.2002.tb00193.x ↗
9. Tomba Martinez AG, Camerucci MA, Urretavizcaya G, Cavalieri AL (2002) Br Ceram Trans 101:9410.1179/096797802225003929 ↗
10. Camerucci MA, Urretavizcaya G, Cavalieri AL (2001) J Eur Ceram Soc 21:119510.1016/S0955-2219(00)00334-4 ↗
11. Tomba Martinez AG (1998) Thermal shock of dense alumina. Ph.D. Thesis, Universidad Nacional Mar del Plata, Argentina
12. Wachtman JB, Capps W, Mandel J (1972) J Mater 7:188
13. Shetty DK, Rosenfield AR, McGuire P, Bansal GK, Duckworth WH (1980) Ceram Bull 59:1193
14. Mussler BH, Shafer MW (1984) Ceram Bull 63:705
15. Camerucci MA, Urretavizcaya G, Castro MS, Cavalieri AL (2001) J Eur Ceram Soc 21:291710.1016/S0955-2219(01)00219-9 ↗
16. Fisher RE (1988) Advances in refractories technology. Ceram Trans 4; The American Ceramic Society, Westerville
17. Poulson B (1983) Corros Sci 23:39110.1016/0010-938X(83)90070-7 ↗
18. Cooper D, Jackson DC, Launder BE, Liao GX (1993) Int J Heat Mass Transfer 36:267510.1016/S0017-9310(05)80204-2 ↗
19. Tomba Martinez AG, Cavalieri AL (2000) Mater Sci Eng A 276:7610.1016/S0921-5093(99)00510-9 ↗
20. Kreith F (1977) Principios de transferencia de calor, Herrero Hermanos Sucesores, S.A., México
21. Osterstock F, Monot I, Desgardin G, Mordike BL (1996) J Eur Ceram Soc 16:68710.1016/0955-2219(95)00190-5 ↗
22. Leoni M, Scardi P, Sglavo M (1998) J Eur Ceram Soc 18:166310.1016/S0955-2219(98)00086-7 ↗
23. Tomba Martinez AG, Camerucci MA, Cavalieri AL (2005) J Eur Ceram Soc 26:2527