Electrical properties and stability against DC accelerated aging stress of lanthania doped praseodymia-based zinc oxide varistor ceramics
Source abstract
Abstract
The microstructure, electrical properties, and stability against DC accelerated aging stress of the varistor ceramics, which are composed of ZnO–Pr6O11–CoO–Cr2O3–La2O3-based ceramics, were investigated for various La2O3 contents. The increase of La2O3 content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0 mol%. The highest nonlinearity was obtained from 0.5 mol% La2O3, in which the nonlinear exponent is 81.6 and the leakage current is 0.1 μA. As the La2O3 content increased, the donor concentration increased in from 0.64 × 1018 to 16.89 × 1018/cm3 and the barrier height greatly decreased with increasing La2O3 content, reaching a maximum (1.47 eV) in 0.5 mol% La2O3. The varistors doped with 0.5 mol% La2O3 exhibited high stability, in which the variation rates of varistor voltage, nonlinear exponent, and leakage current were −1.14%, −3.7%, and +100%, respectively, for stressing state of 0.95 V 1 mA/150 °C/24 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Levinson LM, Pilipp HR (1986) Amer Ceram Soc Bull 65:639
2. Gupta TK (1990) J Amer Ceram Soc 73:181710.1111/j.1151-2916.1990.tb05232.x ↗
3. Lee YS, Tseng TY (1992) J Amer Ceram Soc 75:163610.1111/j.1151-2916.1992.tb04236.x ↗
4. Alles AB, Burdick VL (1991) J Appl Phys 70:688310.1063/1.349812 ↗
5. Alles AB, Puskas R, Callahan G, Burdick VL (1993) J Am Ceram Soc 76:209810.1111/j.1151-2916.1993.tb08339.x ↗
6. Lee Y-S, Liao K-S, Tseng T-Y (1996) J Amer Ceram Soc 79:237910.1111/j.1151-2916.1996.tb08986.x ↗
7. Wakiya N, Chun SY, Lee CH, Sakurai O, Shinozaki K, Mizutani N (1999) J Electroceram 4(S1):1510.1023/A:1009913415608 ↗
8. Chun SY Mizutani N (2001) Mater Sci Eng B79:1
9. Nahm C-W (2001) Mater Lett 47:18210.1016/S0167-577X(00)00262-7 ↗
10. Nahm C-W (2002) Mater Lett 53:11010.1016/S0167-577X(01)00464-5 ↗
11. Nahm C-W (2003) J Europ Ceram Soc 23:134510.1016/S0955-2219(02)00285-6 ↗
12. Nahm C-W (2003) Mater Lett 57:131710.1016/S0167-577X(02)00979-5 ↗
13. Nahm C-W (2003) Mater Lett 57:132210.1016/S0167-577X(02)00980-1 ↗
14. Nahm C-W, Shin B-C (2004) Ceram Int 30:910.1016/S0272-8842(03)00055-5 ↗
15. Nahm C-W (2003) Solid State Commun 127:38910.1016/S0038-1098(03)00436-8 ↗
16. Nahm C-W (2004) Mater Lett 58:225210.1016/j.matlet.2004.01.029 ↗
17. Nahm C-W (2004) Mater Lett 58:329710.1016/j.matlet.2004.06.020 ↗
18. Wurst JC, Nelson JA (1972) J Am Ceram Soc 55:10910.1111/j.1151-2916.1972.tb11224.x ↗
19. Mukae M, Tsuda K, Nagasawa I (1979) J Appl Phys 50:447510.1063/1.326411 ↗
20. Hozer L (1994) Semiconductor ceramics: grain boundary effects. Ellis Horwood, p 22
21. Fan J, Freer R (1994) J Amer Cearm Soc 77:266310.1111/j.1151-2916.1994.tb04659.x ↗
22. Mukae K (1987) Am Ceram Soc Bull 66:1329