Creep rupture mechanisms of 5083-Al alloy under multiaxial stress states
Source abstract
Abstract
The high-temperature rupture behavior of the 5083-Al alloy was tested to failure at 548 K under multiaxial stress states of uniaxial tension using smooth bar specimens, biaxial shearing using double shear bar specimens, and triaxial tension using notched bar specimens. Rupture times were compared for uniaxial, biaxial, and triaxial stress states with respect to the maximum principal stress, the von-Mises effective stress, and the principal facet stress. The results indicate that the von Mises effective and principal facet stresses show a good correlation for the investigated material. The success with two parameters implies that the creep rupture of the 5083-Al alloy is dominated by grain boundary cavitation that is constrained by the creep deformation of the surroundings. The experimental results reveal that the creep rupture of this alloy under the testing condition in the present study is controlled by cavitation coupled with the highly localized deformation process such as grain boundary sliding. The failure-mechanism control parameter for the notched triaxial tension specimens confirms that the effective stress primarily controls the rupture of the uniaxial and triaxial tension specimens. A theoretical prediction based on constrained cavity growth and continuous nucleation was found to be in agreement with the experimental rupture data within a factor of three.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Riedel H (1987) Fracture at high temperatures. Springer, Berlin10.1007/978-3-642-82961-1 ↗
2. Hayhurst DR (1972) J Mech Phys Solids 20:38110.1016/0022-5096(72)90015-4 ↗
3. Hayhurst DR, Leckie FA, Henderson JT (1977) Int J Mech Sci 19:14710.1016/0020-7403(77)90074-1 ↗
4. Kim HK, Mohamed FA, Earthman JC (1991) Met Trans A 22:262910.1007/BF02851356 ↗
5. Henderson J (1979) Trans ASME 101:356
6. Huddleston RL (1985) J Press Vessel Tech 107:42110.1115/1.3264476 ↗
7. Cane BJ (1982) In: Advances in fracture research (Fracture 81), vol 3. Pergamon Press, Oxford, United Kingdom, p 1285
8. Nix WD, Earthman JC, Eggeler G, Ilschner B (1989) Acta Metall 37:106710.1016/0001-6160(89)90103-X ↗
9. Jonson NL, Earthman JC (1994) J Test Eval 22:11110.1520/JTE12643J ↗
10. Kim HK, Mohamed FA, Earthman JC (1992) J Test Eval 19:9310.1520/JTE12540J ↗
11. Cocks F, Ashby MF (1982) Prog Mater Sci 27:26510.1016/0079-6425(82)90001-9 ↗
12. El-Nasr A, Mohamed FA, Earthman JC (1996) Mater Sci Eng A 214:3310.1016/0921-5093(96)10219-7 ↗
13. Dyson BF, Leckie FA (1988) Mater Sci Eng A 103:11110.1016/0025-5416(88)90557-5 ↗
14. Dyson BF (1976) Mater Sci 10:349
15. Cane BJ (1979) 3rd international conference on mechanical behavior of metals, vol 2, Pergamon Press, Cambridge, p 173
16. Kwon O, Thomas CW, Knowles D (2004) Int J Press Ves Pip 81:53510.1016/j.ijpvp.2003.12.023 ↗