journal article·2011-09

Mesoscopic nonequilibrium thermodynamics treatment of the grain boundary thermal grooving induced by the anisotropic surface drift diffusion

Oncu Akyildiz, Ersin Emre Oren, Tarik Omer Ogurtani

Journal of Materials Science· Volume 46· Issue 18
Publisher page

Abstract

A systematic study based on the self-consistent dynamical simulations is presented for the grain boundary thermal grooving problem by strictly following the irreversible thermodynamic theory of surfaces and interfaces with singularities [T. O. Ogurtani, J. Chem. Phys. 124, 144706 (2006)]. This approach furnishes us to have auto-control on the otherwise free-motion of the grain boundary triple junction without presuming any equilibrium dihedral (wetting) angles at the edges. The effects of physicochemical properties and the anisotropic surface diffusivity on the transient grooving behavior, which takes place at the early stage of the scenario, were considered. We analyzed the experimental thermal grooving data reported for tungsten in the literature, and compared them with the carried simulation results. This investigation showed that the observed changes in the dihedral angles are strictly connected to the transient behavior of the simulated global system, and manifest themselves at the early stage of the thermal grooving phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics and Thin Films · Theoretical and Computational Physics · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Tritscher P, Broadbridge P (1995) Proc R Soc Lond A 450:56910.1098/rspa.1995.0101 ↗
2. Mullins WW (1957) J Appl Phys 28:33310.1063/1.1722742 ↗
3. Gibbs W (1948) Thermodynamics, vol I. Yale University Press, New Haven
4. Murr LE (1975) Interfacial phenomena in metals and alloys. Addison-Wesley, Massachusetts
5. Young T (1805) Philos Trans R Soc Lond 95:6510.1098/rstl.1805.0005 ↗
6. Rabkin E, Klinger L, Semenov V (2000) Acta Mater 48:153310.1016/S1359-6454(99)00432-2 ↗
7. Klinger L, Rabkin E (2001) Interface Sci 9:5510.1023/A:1011270830969 ↗
8. Xin T, Wong H (2003) Acta Mater 51:230510.1016/S1359-6454(03)00039-9 ↗
9. Zhang W, Sachenko PP, Gladwell I (2004) Acta Mater 52:10710.1016/j.actamat.2003.08.033 ↗
10. Klinger LM, Chu X, Mullins WW, Bauer CL (1996) J Appl Phys 80:667010.1063/1.363792 ↗
11. Nathan M, Glickman EE, Khenner M, Averbuch A, Israeli M (2000) Appl Phys Lett 77:335510.1063/1.1327274 ↗
12. Khenner M, Averbuch A, Israeli M, Nathan M, Glickman EE (2001) Comput Mater Sci 20:23510.1016/S0927-0256(00)00179-8 ↗
13. Liu CY, Lee S, Chuang TJ (2001) Mater Sci Eng B Solid 86:10110.1016/S0921-5107(00)00804-7 ↗
14. Wang WL, Lee S, Chuang TJ (2002) Philos Mag A 82:95510.1080/01418610208240012 ↗
15. Chuang TJ, Rice JR (1973) Acta Metall 21:162510.1016/0001-6160(73)90105-3 ↗
16. Pharr G, Nix WD (1979) Acta Metall 27:161510.1016/0001-6160(79)90044-0 ↗
17. Martinez L, Nix WD (1982) Metall Trans A 13:42710.1007/BF02643351 ↗
18. Igic P, Mawby PA (1999) Solid State Electron 43:25510.1016/S0038-1101(98)00252-4 ↗
19. Ogurtani TO (2006) J Chem Phys 124:14470610.1063/1.2185625 ↗
20. Ogurtani TO, Oren EE (2005) Int J Solids Struct 42:391810.1016/j.ijsolstr.2004.11.013 ↗
21. Ogurtani TO (2006) Phys Rev B 73:23540810.1103/PhysRevB.73.235408 ↗
22. Oren EE, Ogurtani TO (2002) In: Ozkan CS, Cammaratai RC, Freund LB, Gao H (eds) Thin films: stresses and mechanical properties IX, MRS symposia proceedings No. 695. Materials Research Society, Pittsburgh10.1557/PROC-695-L5.5.1 ↗
23. Ogurtani TO, Akyildiz O (2005) J Appl Phys 97:09352010.1063/1.1883305 ↗
24. Ogurtani TO, Akyildiz O, Oren EE (2008) J Appl Phys 104(1):01351810.1063/1.2952520 ↗
25. Ogurtani TO, Akyildiz O (2008) Int J Solids Struct 45:92110.1016/j.ijsolstr.2007.09.007 ↗
26. Zhang W, Sachenko PP, Schneibel JH (2002) J Mater Res 17:149510.1557/JMR.2002.0222 ↗
27. Yeremin EN (1979) The foundations of chemical kinetics. MIR Publishers, Moscow
28. Ramasubramaniam A, Shenoy VB (2005) Acta Mater 53:294310.1016/j.actamat.2005.03.013 ↗
29. Shewmon PG (1966) In: Margolin H (ed) Recrystallization, grain growth and textures. American Society for Metals, Metals Park, Ohio
30. Hirth JP, Lothe J (1968) Theory of dislocations. McGraw-Hill, New York
31. Smith U, Kristensen N, Ericson F, Schweitz J (1991) J Vac Sci Technol A 9:252710.1116/1.577268 ↗
32. Chen N, Li Z, Wang H, Sun J (2007) J Appl Phys 101:03353510.1063/1.2436833 ↗
33. Ogurtani TO (2009) J Cryst Growth 311:158410.1016/j.jcrysgro.2009.01.084 ↗
34. Gao H (1991) Int J Solids Struct 28:70310.1016/0020-7683(91)90151-5 ↗
35. Binh V, Chaudier M, Couturier J, Uzan R, Drechsler M (1976) Surf Sci 57:18410.1016/0039-6028(76)90176-X ↗
36. Robertson WM (1971) J Appl Phys 42:46310.1063/1.1659625 ↗
37. Zhang W, Schneibel JH (1995) Comput Mater Sci 3:34710.1016/0927-0256(94)00073-L ↗
38. Sachenko PP, Schneibel JH, Swadener JG, Zhang W (2000) Philos Mag Lett 80:62710.1080/09500830050134345 ↗
39. Gjostein NA (1963) In: Robertson WD, Gjostein NA (eds) Metal surfaces: structure, energetics and kinetics. American Society for Metals, Metals Park, Ohio
40. Ogurtani TO (2007) J Appl Phys 102:06351710.1063/1.2781574 ↗
41. Prigogine I (1961) Thermodynamics of irreversible processes. Interscience Publisher, New York