journal article·2014-06Open access

Large deformation of thermally bonded random fibrous networks: microstructural changes and damage

Farukh Farukh, Emrah Demirci, Memiş Acar, Behnam Pourdeyhimi, Vadim V. Silberschmidt

Journal of Materials Science· Volume 49· Issue 11

Abstract

A mechanical behaviour of random fibrous networks is predominantly governed by their microstructure. This study examines the effect of microstructure on macroscopic deformation and failure behaviour of random fibrous networks and its practical implication for optimisation of its structure by using finite-element simulations. A subroutine-based parametric modelling approach—a tool to develop and characterise random fibrous networks—is also presented. Here, a thermally bonded polypropylene nonwoven fabric is used as a model system. Its microstructure is incorporated into the model by explicit introduction of fibres according to their orientation distribution in the fabric. The model accounts for main deformation and damage mechanisms experimentally observed and provides the meso- and macro-level responses of the fabric. The suggested microstructure-based approach identifies and quantifies the spread of stresses and strains in fibres of the network as well as its structural evolution during deformation and damage. Its simulations also predict a continuous shift in the distribution of stresses due to structural evolution and progressive failure of fibres.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Ridruejo A, Gonzalez C, Llorca J (2011) Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics. Int J Solids Stuct 48:153–16210.1016/j.ijsolstr.2010.09.013 ↗
2. Kim HS, Pourdeyhimi B (2000) Characterization of structural changes in nonwoven fabrics during load-deformation experiments. J Text Appar Tech Manag 1:1
3. Farukh F, Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2013) Meso-scale deformation and damage in thermally bonded nonwovens. J Mater Sci 48:2334–234510.1007/s10853-012-7013-y ↗
4. Kim HS (2004) Relationship between fiber orientation distribution function and mechanical anisotropy of thermally point-bonded nonwovens. Fibers Polym 5:177–18110.1007/BF02902996 ↗
5. Kim HS, Pourdeyhimi B (2001) The role of structure on mechanical properties of nonwoven fabrics. Int Nonwovens J 10:32–37
6. Michielsen S, Pourdeyhimi B, Desai P (2006) Review of thermally point-bonded nonwovens: materials, processes and properties. J Appl Polym Sci 99:2489–249610.1002/app.22858 ↗
7. Bhat GS, Jangala PK, Spruiell JE (2004) Thermal bonding of polypropylene nonwovens: effect of bonding variables on the structure and properties of the fabric. J Appl Polym Sci 92:3593–360010.1002/app.20411 ↗
8. Keller DS, Branca DL (2012) Characterization of nonwoven structures by spatial partitioning of local thickness and mass density. J Mat Sci 47:208–22610.1007/s10853-011-5788-x ↗
9. Liao T, Adanur S, Drean JY (1997) Predicting the mechanical properties of nonwoven geotextiles with the finite element method. Text Res J 67:753–76010.1177/004051759706701008 ↗
10. Bias-Singh S, Anandjiwala RD, Goswami BC (1996) Characterizing lateral contraction behaviour of spunbonded nonwovens during uniaxial tensile deformation. Text Res J 66:131–14010.1177/004051759606600302 ↗
11. Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2011) Dynamic response of thermally bonded bicomponent fibre nonwovens. Appl Mech Mater 70:410–41510.4028/www.scientific.net/AMM.70.405 ↗
12. Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2011) Finite element modelling of thermally bonded bicomponent fibre nonwovens: tensile behaviour. Comput Mater Sci 50:129–128610.1016/j.commatsci.2010.02.039 ↗
13. Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2010) ASME Conference Proceeding; ESDA2010: 117–12210.1115/ESDA2010-24664 ↗
14. Ridruejo A, Gonzalez C, LLorca J (2012) A constitutive model for the in-plane mechanical behaviour of nonwoven fabrics. Int J Solids Struct 49:2215–222910.1016/j.ijsolstr.2012.04.014 ↗
15. Hou X, Acar M, Silberschmidt VV (2011) Finite element simulation of low-density thermally bonded nonwoven materials: effect of orientation distribution function and arrangement of bond points. Comput Mater Sci 50:1292–129810.1016/j.commatsci.2010.03.009 ↗
16. Hou X, Acar M, Silberschmidt VV (2011) Non-uniformity of deformation in low-density thermally bonded nonwoven material: effect of microstructure. J Mater Sci 46:307–31510.1007/s10853-010-4800-1 ↗
17. Sabuncuoglu B, Acar M, Silberschmidt VV (2012) A parametric finite element analysis method for low-density thermally bonded nonwovens. Comput Mater Sci 52:164–17010.1016/j.commatsci.2010.12.005 ↗
18. Sabuncuoglu B, Acar M, Silberschmidt VV (2013) Parametric code for generation of finite-element model of nonwovens accounting for orientation distribution of fibres. Int J Numer Methods Eng 79:143–158
19. Farukh F, Demirci E, Sabuncuoglu B, Acar M, Pourdeyhimi B, Silberschmidt VV (2012) Numerical modelling of damage initiation in low-density thermally bonded nonwovens. Comput Mater Sci 64:112–11510.1016/j.commatsci.2012.05.038 ↗
20. Farukh F, Demirci E, Sabuncuoglu B, Acar M, Silberschmidt VV, Pourdeyhimi B (2013) Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens. Comput Mater Sci 71:65–17110.1016/j.commatsci.2013.01.007 ↗
21. Farukh F, Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2013) Meso-scale deformation and damage in thermally bonded nonwovens. J Mat Sci 48:2334–234510.1007/s10853-012-7013-y ↗
22. Jearanaisila WP (2008) A continuum model for needle punched nonwoven fabrics. PhD thesis, MIT, USA
23. Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2012) Computation of mechanical anisotropy in thermally bonded component fibre nonwovens. Comput Mater Sci 52:157–16310.1016/j.commatsci.2011.01.033 ↗
24. Limem S, Warner SB (2005) Adhesive point-bonded spunbond fabrics. Textile Res J 75(1):63–7210.1177/004051750507500112 ↗
25. Mueller DH, Kochmann M (2004) Numerical modelling of thermo bonded nonwovens. Int Nonwovens J 13(1):56–62
26. Farukh F, Demirci E, Acar M, Pourdeyhimi B, Silberschmidt VV (2012) Strength of fibres in low-density thermally bonded nonwovens: an experimental investigation. J Phys Conf Series 382:012018. doi: 10.1088/1742-6596/382/1/01201810.1088/1742-6596/382/1/012018 ↗
27. Ridruejo A, Gonzalez C, LLorca J (2012) Damage localization and failure under biaxial loading in glass-fibre nonwoven felts. Int J Multiscale Comput Eng 10:425–44010.1615/IntJMultCompEng.2012002922 ↗