Novel approach for measuring the effective shear modulus of porous materials
Source abstract
Abstract
A new approach is proposed for the experimental study of the effective shear modulus of porous elastic materials using the uniaxial tension test. The idea is to measure strains at a few points surrounding a cluster of holes that represents the structure of the material. The representative cluster is placed in the material with the same elastic properties as those of the matrix. The measured strains lead to the properties of the equivalent circular inhomogeneity, which would produce the same elastic fields as from the cluster. An aluminum plate containing a cluster of seven circular or hexagonal holes was used. The effective shear modulus obtained from the strain data was compared with theoretical predictions and various bounds, and it was shown that the laboratory estimated values are quite accurate. The experimental technique can be used for the determination of the effective Poisson’s ratio of porous media and/or cellular solids if more detailed strain data are obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Composite Material Mechanics · Numerical methods in engineering · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Hashin Z (1983) J Appl Mech 50:48110.1115/1.3167081 ↗
2. Christensen RM (1990) J Mech Phys Solids 38(3):37910.1016/0022-5096(90)90005-O ↗
3. Markov KZ, Preziosi L (2000) Heterogeneous media: micromechanics modeling methods and simulations. Birkhauser, Boston10.1007/978-1-4612-1332-1 ↗
4. Mishnaevsky L Jr (2007) Computational mesomechanics of composites: numerical analysis of the effect of microstructures of composites of strength and damage resistance. Wiley-Interscience, Chichester, UK10.1002/9780470513170 ↗
5. Carvalho FCS, Labuz JF (1996) Int J Solids Struct 33(28):411910.1016/0020-7683(95)00269-3 ↗
6. Lobb CJ, Forrester MG (1987) Phys Rev B 35(4):189910.1103/PhysRevB.35.1899 ↗
7. Day AR, Snyder KA, Garboczi EJ (1992) J Mech Phys Solids 40(5):103110.1016/0022-5096(92)90061-6 ↗
8. Achenbach JD, Zhu H (1990) Trans ASME 57:95610.1115/1.2897667 ↗
9. Eischen JW, Torquato S (1993) J Appl Phys 74:15910.1063/1.354132 ↗
10. Panakkal JP, Willems H, Arnold W (1990) J Mater Sci 25:1397. doi: https://doi.org/10.1007/BF0058545610.1007/BF00585456 ↗
11. Sayers CM (1993) Ultrasound in solids with porosity, microcracking and polycrystalline structure. In: Achenbach JD (ed) Evaluation of materials and structures by quantitative ultrasonics. Springer, Wien10.1007/978-3-7091-4315-5_17 ↗
12. Mogilevskaya SG, Crouch SL, Stolarski HK, Benusiglio A (2009) Int J Solids Struct. doi: https://doi.org/10.1016/j.ijsolstr.2009.10.00710.1016/j.ijsolstr.2009.10.007 ↗
13. Mogilevskaya SG, Crouch SL (2001) Int J Num Methods Eng 52:106910.1002/nme.243 ↗
14. Mogilevskaya SG, Crouch SL, Stolarski HK (2008) J Mech Phys Solids 56(6):229810.1016/j.jmps.2008.01.001 ↗
15. Wang J, Crouch SL, Mogilevskaya SG (2003) Eng Anal Bound Elements 27:78910.1016/S0955-7997(03)00043-2 ↗
16. Torquato S, Gibiansky LV, Silva MJ, Gibson LJ (1998) Int J Mech Sci 40(1):7110.1016/S0020-7403(97)00031-3 ↗
17. Phani KK, Sanyal D (2005) J Mater Sci 40:5685. doi: https://doi.org/10.1007/s10853-007-1677-810.1007/s10853-005-1507-9 ↗
18. McLaughlin R (1977) Int J Eng Sci 15:23710.1016/0020-7225(77)90058-1 ↗
19. Hashin Z (1965) J Mech Phys Solids 13:11910.1016/0022-5096(65)90015-3 ↗
20. Chow TS, Hermans JJ (1969) J Compos Mater 3:38210.1177/002199836900300302 ↗
21. Ekneligoda TC, Zimmerman RW (2008) Proc R Soc Lond Ser A 464:75910.1098/rspa.2007.0268 ↗