Microscopic fracture mechanisms observed on Cu–Sn frangible bullets under quasi-static and dynamic compression
Source abstract
Abstract
The damage behavior of Cu–Sn frangible bullets was characterized in an effort to aid predictions of impact performance of these projectiles with soft body armor through finite element simulations. Fracture surfaces and failed cross sections were examined via light optical and scanning electron microscopy and related to the composite bullet microstructure. Two types of samples were analyzed: (1) those used in quasi-static and dynamic diametral compression testing to determine the effective properties of the composite material, and (2) bullets discharged into soft body armor. Two primary microscopic fracture mechanisms were cleavage and intergranular fracture of the Cu–Sn intermetallic compounds, ɛ(Cu3Sn) and η(Cu6Sn5), which joined the un-bonded copper particles in the composite microstructure. Microvoid coalescence of copper metal was also observed, though infrequently, in places where the spacing between intermetallic phase clusters on a single copper particle was typically no greater than 30 μm. These modes of failure were similar between the samples used in the mechanical testing methods and the discharged bullets. From these results, it is reasonable to assume that the failure strength data measured via diametral compression testing can be used to predict the onset of bullet failure on impact during finite element simulations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. United States Patent 6,090,178. July 18, 2000. Frangible metal bullets, ammunition, and method of making such articles (Inventory is Joseph C. Benini)
2. Banovic SW (2007) Mater Sci Eng A 460–461:428. doi: https://doi.org/10.1016/j.msea.2007.01.11310.1016/j.msea.2007.01.113 ↗
3. Mates SP, Rhorer R, Banovic S, Whitenton E, Fields RJ (2008) Int J Impact Eng 35(6):511. doi: https://doi.org/10.1016/j.ijimpeng.2007.04.00510.1016/j.ijimpeng.2007.04.005 ↗
4. Rudnick A, Hunter AR, Holden FC (1963) Mater Res Stand 3:283
5. Gray GT III (1990) ASM handbook, vol 8. The American Society for Metals, Materials Park, OH, pp 462–476
6. National Institute of Justice (1987) Ballistic resistance of police body armor. NIJ Standard-0101.03
7. Meyers MA (1994) Dynamic behavior of materials. John Wiley & Sons, New York10.1002/9780470172278 ↗