journal article·2010-10

The influence of ECAP on the small punch creep of Al–4 vol.% Al4C3 composite

Ferdinand Dobeš, Karel Milička, Michal Besterci, Tibor Kvačkaj

Journal of Materials Science· Volume 45· Issue 19
Publisher page

Abstract

The creep behaviour of a composite based on an aluminium matrix reinforced by 4 vol.% Al4C3 was studied at temperatures of 623 and 723 K by small punch testing with a constant force. The composite was tested in two different states: (i) as received by mechanical alloying with hot extrusion (HE) as the final operation and (ii) with equal channel angular pressing (ECAP) superimposed on the hot-extruded material. The ECAP does not improve the observed creep resistance. The reduction of force leading to the same deflection rate is not very significant. This points out that the ECAP process of the present composite, which produces substantial strengthening at lower temperatures, is not accompanied by pronounced weakening of creep resistance at elevated temperatures. The threshold force in the ECAP material is about 5 N weaker than in the HE material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Clyne TW, Withers PJ (1993) An introduction to metal matrix composites. Cambridge University Press, Cambridge10.1017/CBO9780511623080 ↗
2. Segal VM (1999) Mater Sci Eng A271:32210.1016/S0921-5093(99)00248-8 ↗
3. Lowe TC, Valiev RZ (2000) JOM J Min Met Mater Soc 52:2710.1007/s11837-000-0127-8 ↗
4. Furukawa M, Horita Z, Nemoto M, Langdon TG (2001) J Mater Sci 36:2835. doi: 10.1023/A:101793241704310.1023/A:1017932417043 ↗
5. Valiev RZ, Langdon TG (2006) Prog Mater Sci 51:88110.1016/j.pmatsci.2006.02.003 ↗
6. Nakashima K, Horita Z, Nemoto M, Langdon TG (1998) Acta Mater 46:158910.1016/S1359-6454(97)00355-8 ↗
7. Huang WH, Chang L, Kao PW, Chang CP (2001) Mater Sci Eng A307:11310.1016/S0921-5093(00)01881-5 ↗
8. Semiatin SL, Delo DP, Shell EB (2000) Acta Mater 48:184110.1016/S1359-6454(00)00019-7 ↗
9. Berbon PB, Furukawa M, Horita Z, Nemoto M, Langdon TG (1999) Met Mater Trans 30A:198910.1007/s11661-999-0009-9 ↗
10. Yamaguchi D, Horita Z, Nemoto M, Langdon TG (1999) Scr Mater 41:79110.1016/S1359-6462(99)00233-X ↗
11. Yamashita A, Yamaguchi D, Horita Z, Langdon TG (2000) Mater Sci Eng A287:10010.1016/S0921-5093(00)00836-4 ↗
12. Mabuchi M, Higashi K (1998) J Mater Sci Lett 17:21510.1023/A:1006584211768 ↗
13. Furukawa M, Horita Z, Nemoto M, Valiev RZ, Langdon TG (1996) Mater Charact 37:27710.1016/S1044-5803(96)00131-3 ↗
14. Shan A, Moon IG, Ko HS, Park JW (1999) Scr Mater 41:35310.1016/S1359-6462(99)00188-8 ↗
15. Kawasaki M, Sklenička V, Langdon TG (2010) J Mater Sci 45:271. doi: 10.1007/s10853-009-3975-910.1007/s10853-009-3975-9 ↗
16. Wu SD, Wang ZG, Jiang CB, Li GY, Alexandrov IV, Valiev RZ (2003) Scr Mater 48:160510.1016/S1359-6462(03)00141-6 ↗
17. Stolyarov VV, Zhu YT, Alexandrov IV, Lowe TC, Valiev RZ (2003) Mater Sci Eng A343:4310.1016/S0921-5093(02)00366-0 ↗
18. Lapovok R, Tomus D, Mang J, Estrin Y, Lowe TC (2009) Acta Mater 57:290910.1016/j.actamat.2009.02.042 ↗
19. Figueiredo RB, Cetlin PR, Langdon TG (2007) Acta Mater 55:476910.1016/j.actamat.2007.04.043 ↗
20. Figueiredo RB, Langdon TG (2008) J Mater Sci 43:7366. doi: 10.1007/s10853-008-2846-010.1007/s10853-008-2846-0 ↗
21. Valiev RZ, Islamgaliev RK, Kuzmina NF, Li Y, Langdon TG (1999) Scr Mater 40:11710.1016/S1359-6462(98)00398-4 ↗
22. Li Y, Langdon TG (2000) J Mater Sci 35:1201. doi: 10.1023/A:100474050461910.1023/A:1004740504619 ↗
23. Kawasaki M, Huang Y, Xu Ch, Furukawa M, Horita Z, Langdon TG (2005) Mater Sci Eng A410–411:40210.1016/j.msea.2005.08.073 ↗
24. Ramu G, Bauri R (2009) Mater Des 30:355410.1016/j.matdes.2009.03.001 ↗
25. Lucas GE (1990) Met Trans 21A:110510.1007/BF02698242 ↗
26. Baik JM, Kameda J, Buck O (1983) Scr Met 17:144310.1016/0036-9748(83)90373-3 ↗
27. Evans M, Wang D (2008) J Mater Sci 43:1825. doi: 10.1007/s10853-007-2388-x10.1007/s10853-007-2388-x ↗
28. Dobeš F, Milička K, Besterci M (2007) High Temp Mater Process 6:193
29. Frost HJ, Ashby MF (1982) Deformation-mechanism maps. The plasticity and creep of metals and ceramics. Pergamon Press, Oxford
30. Besterci M (2006) Mater Des 27(5):41610.1016/j.matdes.2004.11.012 ↗
31. Besterci M, Kohutek I, Sulleiova K, Saxl I (1999) J Mater Sci 34:1055. doi: 10.1023/A:100455221345510.1023/A:1004552213455 ↗
32. Ule B, Šustar T, Dobeš F, Milička K, Bicego V, Tettamanti S, Maile K, Schwarzkopf C, Whelan MP, Kozlowski RH, Klaput J (1999) Nucl Eng Des 192:110.1016/S0029-5493(99)00039-4 ↗
33. Dobeš F, Milička K, Ule B, Šustar T, Bicego V, Tettamanti S, Kozlowski RH, Klaput J, Whelan MP, Maile K, Schwarzkopf C (1998) Eng Mech 5:157
34. Orlová A, Kuchařová K, Čadek J, Besterci M (1986) Kovové Mater 24:505
35. Li Y, Langdon TG (1999) Acta Mater 47:339510.1016/S1359-6454(99)00219-0 ↗
36. Langdon TG (1994) Acta Met Mater 42:243710.1016/0956-7151(94)90322-0 ↗