journal article·2007-06

Martensite/particle interactions and the shape memory effect in an Fe–Mn–Si-based alloy

Nicole Stanford, Druce P. Dunne

Journal of Materials Science· Volume 42· Issue 12
Publisher page

Abstract

The effect of carbide precipitates with a size range of 30–300 nm on the austenite to martensite transformation has been studied. Such particles are known to enhance shape memory, and it was the aim of this work to clarify how the particles exert a favourable effect on shape memory. Differential scanning calorimetry revealed that the presence of particles increases the amount of thermally induced martensite. X-ray diffraction showed that the presence of particles increases the amount of stress-induced martensite also. Surface-relief produced on a pre-polished surface by bending deformation showed that the particle-containing samples exhibited a more complex and highly tilted surface-relief indicative of the formation of a larger volume fraction of martensite. The reversion characteristics of the particle-containing and solution-treated samples were similar: both showed co-reversion of multiple variants of martensite within the same volume of microstructure. However, a higher volume fraction of martensite reverted for the particle-containing sample on recovery annealing. The increased density of nucleation sites for martensite formation and a higher volume fraction of stress-induced martensite for a given strain are therefore considered to be the main contributions of relatively coarse carbide particles to the improvement of shape memory performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Kajiwara S, Liu D, Kikuchi T, Shinya N (2001) Scripta Mater 44:280910.1016/S1359-6462(01)00978-2 ↗
2. Baruj A, Kikuchi T, Kajiwara S, Shinya N (2003) J Phys IV 112:373
3. Dong Z, Liu W, Chen J, Wang D (2003) J Phys IV 112:389
4. Stanford N, Dunne DP (2006) J Mater Sci 41(15):488310.1007/s10853-006-0050-7 ↗
5. Stanford N, Dunne D (2005) Scripta Mater 53:73910.1016/j.scriptamat.2005.05.017 ↗
6. Liu DZ, Kajiwara S, Kikuchi T, Shinya N (2003) Phil Mag 83:287510.1080/1478643031000149090 ↗
7. Deiter GE (1988) Mechanical metallurgy, Metric edition. McGraw Hill Book Co
8. Otsuka H, Murakami M, Matsuda S (1989) In: Doyama M, Sōmiya S, Chang R (eds) Proceedings of the MRS international meeting on advanced materials, vol 9, Tokyo, Japan 1998, Materials Research Society, Pittsburgh, p 451