Deformation micromechanics of a thermoplastic-thermoset interphase of epoxy composites reinforced with poliethylene fiber
Source abstract
Abstract
The polyethylene fibre is one of the strongest man-made materials; its strength is based on its high crystalinity order. Nevertheless, due to the Polyethylene chemical nature, it shows a low reactivity, which limits its use for composite materials, especially with thermoset matrices like the Epoxy resin. The present work uses Raman Spectroscopy to monitor the loading and failure of a thermoplastic-thermoset interface. Pull-out specimens were prepared with Spectra 1000 Polyethylene fibre embedded in a epoxy resin block; the fibre extraction was performed in a stepwise fashion and with the aid of a micro-Raman, spectra were taken along the interface through out the whole process. The technique allowed to measure the interface strength and to monitor the propagation of the debonding front up to total failure. Some results correspond to specimens were the interface was improved by changing the surface chemistry of the thermoplastic fibre to make it more compatible to the thermoset matrix. © 2004 Kluwer Academic Publishers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. L. J. Broutman, “Interfaces in Composites,” ASTMSSTP452 (1969) p. 27.10.1520/STP44698S ↗
2. F. P. M. Mercx and P. J. Lemstra, Polym. Commun. 31(1990) 252.
3. B. Miller, P. Muri and L. Rebenfeld, Comp. Sci. Techn. 28(1987) 17.10.1016/0266-3538(87)90059-5 ↗
4. H. D. Wagner, E. Gallis and E. Wiesel, J. Mater. Sci. 28(1993) 2238.10.1007/BF00367590 ↗
5. M. J. Pitkethly, J. P. Favre, U. Gaur, J. Jakubowski, S. F. Midrich, D. L. Galdwell, L. T. Drzal, M. Nardin, H. D. Wagner, L. D. Landro, A. Hampe, J. P. Armistead, M. Desaeger and I. Verpoest, Comp. Sci. Techn. 48(1993) 205.10.1016/0266-3538(93)90138-7 ↗
6. G. DÉsarmot and J.-P. Favrre, ibid. 42(1991) 151.10.1016/0266-3538(91)90016-I ↗
7. A. Kelly and W. R. Tyson, J. Mech. Phys. Solids 13(1965) 329.10.1016/0022-5096(65)90035-9 ↗
8. A. Kelly and N. H. Macmillan, “Strong Solids” (Claredon Press, 1986).
9. L. S. Penn and S. M. Lee, J. Comp. Techn. Res. 11(1989) 23.10.1520/CTR10145J ↗
10. M. R. Piggott, Comp. Interf. 1(1993) 211.10.1163/156855493X00086 ↗
11. M. J. Pitkethly and J. B. Doble, Composites 21(1990) 389.10.1016/0010-4361(90)90436-Z ↗
12. L. C. N. Boogh, R. J. Meier, H.-H. Kausch and B. K. Kip, J. Polym. Sci., Part B: Polym. Phys. 30(1992) 325.10.1002/polb.1992.090300402 ↗
13. Z.-F. Li and A. N. Netravali, J. Appl. Polym. Sci. 44(1992) 333.10.1002/app.1992.070440217 ↗
14. D. T. Grubb and Z.-F. Li, J. Mater. Sci. 29(1994) 203.10.1007/BF00356594 ↗
15. A. K. Patrikis, M. C. Andrews and R. J. Young, Comp. Sci. Techn. 52(1994) 387.10.1016/0266-3538(94)90173-2 ↗
16. D. J. Bannister, M. C. Andrews, A. J. Cervenka and R. J. Young, ibid. 53(1995) 411.10.1016/0266-3538(95)00030-5 ↗
17. X. Yang, D. J. Bannister and R. J. Young, J. Amer. Ceram. Soc. 79(1996) 1868.10.1111/j.1151-2916.1996.tb08007.x ↗
18. X. Gu, “Micromechanics of Model Carbon Fibre/Epoxy Resin Composites,” PhD Thesis, University of Manchester Institute of Science and Technology (UMIST) 1995.
19. B. J. Kip, M. C. P. Van Eijk and R. J. Meier, J. Polym. Sci.,Part B: Polym. Phys. 29(1991) 99.10.1002/polb.1991.090290113 ↗
20. J. A. H. M. Moonene, W. A. C. Roovers, R. J. Meier and B. J. Kip, J. Polym. Sci., Polym. Phys. 30(1992) 361.10.1002/polb.1992.090300406 ↗
21. D. T. Grubb and Z.-F. Li, Polymer 33(1992) 2587.10.1016/0032-3861(92)91142-O ↗
22. S. Van Der Zwaag, M. G. Northolt, R. J. Young, I. M. Robinson, C. Galiotis and D. N. Batchelder, Polym. Commun. 28(1987) 276.
23. R. P. Wool, R. S. Bretzlaff, B. Y. Li, C. H. Wang and R. H. Boyd, J. Poly. Sci.:Part B: Polym. Phys. 24(1986) 1039.10.1002/polb.1986.090240508 ↗
24. M. R. Piggott, “Load Bearing Fibre Composites” (Pergamon Press, Oxford, UK, 1980) p. 83.10.1016/B978-0-08-024231-6.50010-6 ↗
25. P. S. Chua and M. R. Piggott, Comp. Sci. Techn. 22(1985) 33.10.1016/0266-3538(85)90089-2 ↗
26. M. R. Piggott, ibid. 42(1991) 57.10.1016/0266-3538(91)90012-E ↗
27. T. Lacroix, B. Tilmans, R. Keunings, M. Desaeger and I. Verpoest, ibid. 43(1992) 379.10.1016/0266-3538(92)90061-7 ↗
28. “Ciba-Geigy Data Sheet,” Publication No. s.90a, May, 1988.
29. M. C. Andrews, “Stress Transfer in Aramid/Epoxy Model Composites,” PhD Thesis, University of Manchester Institute of Science and Technology (UMIST) 1994.
30. P. I. GonzÁlez-Chi, “Deformation Micromechanics in Polyethylene-Epoxy Fibre-Reinforced Composites,” PhD Thesis, University of Manchester Institute of Science and Technology (UMIST) 1994.
31. M. Nardin and I. M. Wood, Mater. Sci. Techn. 42(1991) 814.
32. S. Kumar, Ind. J. Fibre Textile Res. 16(1991) 52.
33. Z.-F. Li and D. T. Grubb, J. Mater. Sci. 29(1994) 189.10.1007/BF00356593 ↗
34. C. Galiotis, R. J. Young, P. H. J. Yeung and D. N. Batchelder, ibid. 19(1984) 3640.10.1007/BF02396936 ↗
35. C. Marotzke, Comp. Sci. Techn. 50 (1994) 393.10.1016/0266-3538(94)90027-2 ↗