journal article·2004-04

Thermal stability of Ti-V-Cr burn-resistant alloys

K. Y. Zhu, Y. Q. Zhao, H. L. Qu, H. Wu

Journal of Materials Science· Volume 39· Issue 7
Publisher page

Abstract

Ti-35V-15Cr, Ti-25V-15Cr and Ti-25V-15Cr-0.4Si alloys were exposed to different temperatures in air (450–600°C) for aging times between 0 and 200 h and subsequently tensile tested at room temperature with the surface oxide retained or removed. The influence of an applied tensile stress (50–200 MPa) during thermal exposure was also investigated. The results showed that post-exposure tensile properties deteriorated with the increase in exposure temperature and time. The decrease in tensile properties resulted from the combination of surface oxidation and microstructural changes. The main change of the microstructure during thermal exposure is the heterogeneous precipitation of α phase on beta grain boundaries. Both increased vanadium content in the alloy and the addition of silicon have shown an adverse effect on alloys' thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. D. M. Berczik U. S. Patent Application, 5176762, 1993.
2. Y. G. Li, P. A. Blenkinsop, M. H. Loretto and K. Rugg Acta Mater. 10 (1999) 2889.
3. Y. Q. Zhao, K. Y. Zhu, H. L. Qu and H. Wu Mater. Sci. Tech. 16 (2000) 1073.10.1179/026708300101508883 ↗
4. P. A. Russo and S. R. Seagle “Titanium '95 Science and Technology,” edited by P. A. Blenkinsop, W. J. Evans and H. M. Flower (The Institute of Materials, London, 1996) p. 841.
5. Y. Q. Zhao, H. L. Qu, K. Y. Zhu and H. Wu Chin. J. Rare Metal Mater. Engin. 2 (1999) 77.
6. Y. Q. Zhao, L. Zhou, K. Y. Zhu, H. L. Qu and H. Wu Chin. J. J. Mater. Sci. Technol. 6 (2001) 677.
7. Y. Q. Zhao, H. L. Qu, K. Y. Zhu and H. Wu J. Alloys and Compounds 284 (1999) 190.10.1016/S0925-8388(98)00926-8 ↗
8. Y. Q. Zhao, K. Y. Zhu, H. L. Qu and H. Wu Mater. Sci. Eng. A 267 (1999) 167.10.1016/S0921-5093(99)00109-4 ↗
9. Y. Q. Zhao, H. L. Qu, K. Y. Zhu and H. Wu Mater. Sci. Eng. A 316 (2001) 211.10.1016/S0921-5093(01)01238-2 ↗
10. Y. Q. Zhao, K. Y. Zhu, H. L. Qu and H. Wu ibid. 282 (2000) 153.10.1016/S0921-5093(99)00761-3 ↗
11. D. Eylon in Proceedings of the International Symposium on Metallurgy and Technology of Practical Titanium Alloys, edited by S. Fujishiro, D. Eylon and T. Kishi (Tokyo, Japan, 1994) p. 29.
12. C. E. Shamblen in “The Science, Technology and Application of Titanium,” edited by R. I. Jaffee and N. E. Promisel (Pergamon Press, UK, 1970) p. 199.10.1016/B978-0-08-006564-9.50027-0 ↗
13. H. Wu, Y. Q. Zhao, H. L. Qu and K. Y. Zhu Chin. J. Rare Metal Mater. and Engin. 1 (2003) 45.
14. J. Y. Wang, Z. M. Ge and Y. B. Zhou “Titanium Alloys on Aeroplanes” (Shanghai Science and Technology Press, 1985) p. 232.
15. B. C. Zhang Chin. J. Rare Metal Mater. Engin. 4 (1985) 63.
16. T. W. Duerig and J. C. Williams in “Beta Titanium Alloys in the 1980's,” edited by R. R. Boyer and H. W. Rosenberg (AIME, Warrendale, USA, 1984) p. 19.
17. “Phase Diagrams of Binary Titanium Alloys,” edited by J.L. Murray (ASM, Metals Park, USA, 1987) p. 71.
18. A. Vassel in “Beta Titanium Alloys in the 1990's,” edited by D. Eylon, R. R. Boyer and D. A. Koss (TMS, Warrendale, USA. 1993) p. 173.