journal article·2007-06

Microstructure characterization of in situ synthesized porous Si3N4–Si2N2O composites using feldspar additive

Rajat Kanti Paul, Chi-Woo Lee, Hai-Doo Kim, Byong-Taek Lee

Journal of Materials Science· Volume 42· Issue 12
Publisher page

Abstract

Porous Si3N4–Si2N2O bodies fabricated by multi-pass extrusion process were investigated depending on the feldspar addition content (4–8 wt% Si) in the raw silicon powder. The diameter of the continuous pores was about 250 μm. The polycrystalline Si2N2O fibers observed in the continuous pores as well as in the matrix regions of the nitrided bodies can increase the filtration efficiency. In the 4 wt% feldspar addition, the diameter of the Si2N2O fibers in the continuous pores of the nitrided bodies was about 90–150 nm. A few number of rope typed Si2N2O fibers (∼4 μm) was found in the case of 8 wt% feldspar addition. However, in the 8 wt% feldspar addition, the matrix showed highly porous structure composed of large number of the Si2N2O fibers (∼60 nm). The relative densities of the Si3N4–Si2N2O bodies with 4 wt% and 8 wt% feldspar additions were about 65% and 61%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Bone Tissue Engineering Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Schioler LJ (1985) Am Ceram Soc Bull 64:268
2. Pyzik J, Beaman DR (1993) J Am Ceram Soc 76:273710.1111/j.1151-2916.1993.tb04010.x ↗
3. Riley FL (2000) J Am Ceram Soc 83:24510.1111/j.1151-2916.2000.tb01182.x ↗
4. Bressiani JC, Izhevskyi V, Bressiani AHA (1999) Mater Res 2:16510.1590/S1516-14391999000300009 ↗
5. Lee BT, Kim HD (1996) Mater Trans JIM 37:154710.2320/matertrans1989.37.1547 ↗
6. Lee BT, Yoo JH, Kim HD (2002) Mater Sci Eng A 333:30610.1016/S0921-5093(01)01855-X ↗
7. Lee JS, Mun JH, Han BD, Kim HD, Shin BC, Kim IS (2004) Ceram Intl 30:96510.1016/j.ceramint.2003.11.003 ↗
8. Ohashi M, Kanzaki S, Tabata H (1991) J Am Ceram Soc 74:10910.1111/j.1151-2916.1991.tb07305.x ↗
9. Emoto H, Mitomo M, Wang CM, Hirosturu H, Inaba T (1998) J Eur Ceram Soc 18:52710.1016/S0955-2219(97)00155-6 ↗
10. Radwan M, Kashiwagi T, Miyamoto Y (2003) J Eur Ceram Soc 23:233710.1016/S0955-2219(03)00040-2 ↗
11. Lee BT, Kim HD (2004) Mater Sci Eng A364:12610.1016/j.msea.2003.07.005 ↗
12. Yamamoto H, Akiyama K, Murakami Y (2006) J Eur Ceram Soc 26:105910.1016/j.jeurceramsoc.2004.12.022 ↗
13. Miyakawa N, Sato H, Maeno H, Takahashi H (2003) JSAE Rev 24:26910.1016/S0389-4304(03)00050-X ↗
14. Moreira EA, Innocentini MDM, Coury JR (2004) J Eur Ceram Soc 24:320910.1016/j.jeurceramsoc.2003.11.014 ↗
15. Lee BT, Kim KH, Han JK (2004) J Mater Res 19:323410.1557/JMR.2044.0414 ↗
16. Lee BT, Kang IC, Cho SH, Song HY (2005) J Am Ceram Soc 88:226210.1111/j.1551-2916.2005.00364.x ↗
17. Lee BT, Jang DH, Kang IC, Lee CW (2005) J Am Ceram Soc 88:287410.1111/j.1551-2916.2005.00519.x ↗
18. Steiner JC, Jahns RH, Luth WC (1975) Geo Soc Am Bull 86:8310.1130/0016-7606(1975)86<83:COAFAQ>2.0.CO;2 ↗
19. Mitomo M, Ono S, Asami T, Kang SJL (1989) Ceram Intl 15:34510.1016/0272-8842(89)90047-3 ↗
20. Huag ZK, Greil P, Petzow G (1984) Ceram Intl 10:1410.1016/0272-8842(84)90017-8 ↗
21. Scheffler M, Pippel E, Woltersdorf J, Greil P (2003) Mater Chem Phy 80:56510.1016/S0254-0584(03)00093-2 ↗
22. Chollon G, Hany R, Vogt U, Berroth K (1998) J Eur Ceram Soc 18:53510.1016/S0955-2219(97)00162-3 ↗
23. Paul RK, Lee CW, Kim HD, Lee BT (2007) Mater Sci Forum 534–536:104910.4028/www.scientific.net/MSF.534-536.1049 ↗