Sintered reaction-bonded silicon nitride foams with a high level of interconnected porosity
Source abstract
Abstract
Sintered reaction-bonded silicon nitride (SRBSN) foams with very high porosity levels of up to 85 vol% and pore interconnectivity have been fabricated in this study. SRBSN foams were fabricated based on gel-casting of Si-PMMA suspensions followed by nitriding and sintering. The addition of MgO and Y2O3–Al2O3 as sintering additives resulted in significant changes in the foam microstructure. Small amounts of MgO completely prevented the whisker-forming reactions during nitridation while the addition of Y2O3–Al2O3 could not prevent whisker formation during nitridation. It was observed that regardless of the sintering aid system, SRBSN foams were whisker-free and revealed high pore interconnectivity after sintering. The SRBSN foam struts were only composed of β-Si3N4 grains embedded in an intergranular amorphous phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Zhu X, Zhou Y, Hirao K, Lences Z (2006) Processing and thermal conductivity of sintered reaction-bonded silicon nitride. I: effect of si powder characteristics. J Am Ceram Soc 89(11):3331–333910.1111/j.1551-2916.2006.01195.x ↗
2. Lee J-S, Mun J-H, Han B-D, Kim H-D, Shin B-C, Kim I-S (2004) Effect of raw-Si particle size on the properties of sintered reaction-bonded silicon nitride. Ceram Int 30:965–97610.1016/j.ceramint.2003.11.003 ↗
3. Hyuga H, Yoshida K, Kondo N, Kita H, Okano H, Sugai J, Tsuchida J (2008) Influence of zirconia addition on reaction bonded silicon nitride produced from various silicon particle sizes. J Ceram Soc Jpn 116(6):688–69310.2109/jcersj2.116.688 ↗
4. Pigeon R, Varma A, Miller A (1993) Some factors influencing the formation of reaction-bonded silicon nitride. J Mater Sci 28:1919–1936. doi: 10.1007/BF0059576510.1007/BF00595765 ↗
5. Huang Y, Zhou L, Tang Q, Xie Z, Yang J (2001) Water-based gelcasting of surface-coated silicon nitride powder. J Am Ceram Soc 84(4):701–70710.1111/j.1151-2916.2001.tb00729.x ↗
6. Alem A, Pugh MD, Drew RA (2014) Open-cell reaction bonded silicon nitride foams: fabrication and characterization. J Eur Ceram Soc 34(3):599–60910.1016/j.jeurceramsoc.2013.09.011 ↗
7. Alem A, Drew RAL, Pugh MD (2014) The influence of the nitriding parameters on the microstructure and strength of the open-cell reaction bonded silicon nitride foams fabricated via wet processing. J Mater Sci 49:4780–4789. doi: 10.1007/s10853-014-8177-410.1007/s10853-014-8177-4 ↗
8. Tuyen D-V, Park Y-J, Kim H-D, Lee B-T (2009) Formation of rod-like Si3N4 grains in porous SRBSN bodies using 6Y2O3–2MgO sintering additives. Ceram Int 35:2305–231010.1016/j.ceramint.2009.01.010 ↗
9. Park Y-J, Kim H-D, Halloran JW (2011) Permeability enhancement in porous-sintered reaction-bonded silicon nitrides. Int J Appl Ceram Technol 8(4):809–81410.1111/j.1744-7402.2010.02511.x ↗
10. Zhou Y, Zhu X, Hirao K (2008) Sintered reaction-bonded silicon nitride with high thermal conductivity and high strength. Int J Appl Ceram Technol 5(2):119–12610.1111/j.1744-7402.2008.02187.x ↗
11. Muller M, Bauer W, Knitter R (2009) Processing of micro-components made of sintered reaction-bonded silicon nitride (SRBSN). Part 1: factors influencing the reaction-bonding process. Ceram Int 35:2577–258510.1016/j.ceramint.2009.02.013 ↗
12. Zhu X, Zhou Y, Hirao K (2004) Post-densification behavior of reaction-bonded silicon nitride (RBSN): effect of various characteristics of RBSN. J Mater Sci 39:5785–5797. doi: 10.1023/B:JMSC.0000040090.33370.6610.1023/B:JMSC.0000040090.33370.66 ↗
13. Gazzara CP, Messier DR (1977) Determination of phase content of Si3N4 by X-ray diffraction analysis. Am Ceram Soc Bull 56(9):777–780
14. Riley FL (2000) Silicon nitride and related materials. J Am Ceram Soc 83(2):245–26510.1111/j.1151-2916.2000.tb01182.x ↗
15. Kolitsch U, Seifert H, Ludwig T, Aldinger F (1999) Phase equilibria and crystal chemistry in the Y2O3-Al2O3-SiO2 system. J Mater Res 14(2):447–45510.1557/JMR.1999.0064 ↗
16. Jennings HM (1983) Review: on reactions between silicon and nitrogen; Part 1 Mechanisms. J Mater Sci 18:951–967. doi: 10.1007/BF0055196110.1007/BF00551961 ↗
17. Jennings HM, Richman MH (1976) Structure, formation mechanisms and kinetics of reaction-bonded silicon nitride. J Mater Sci 11:2087–2098. doi: 10.1007/PL0002033710.1007/BF02403359 ↗
18. Moulson A (1979) Review: reaction-bonded silicon nitride: its formation and properties. J Mater Sci 14:1017–1051. doi: 10.1007/BF0056128710.1007/BF00561287 ↗
19. Pigeon RG, Varma A, Miller AE (1993) Some factors influencing the formation of reaction-bonded silicon nitride. J Mater Sci 28:1919–1936. doi: 10.1007/BF0059576510.1007/BF00595765 ↗
20. Jennings HM, Dalgleish BJ, Pratt PL (1988) Reactions between silicon and nitrogen; Part 2 Microstructure. J Mater Sci 23:2573–2583. doi: 10.1007/BF0111191710.1007/BF01111917 ↗
21. Sata T, Sasamoto J, Lee M, Maeda E (1978) Vaporization processes from magnesia materials. Rev Int Hautes Temp Refract 15:237–247