Synthesis and characterization of some novel thermally stable poly(amide–imide)s
Source abstract
Abstract
Two new diamines with built-in amide linkage were synthesized from p-nitrobenzoyl chloride in two steps and characterized by their melting points, elemental analyses, FT-IR and 1H–NMR spectral studies. One of the diamine precursors was also characterized by single crystal X-ray analysis indicating the trans orientation of amide bonds. The planes of the aromatic rings formed dihedral angles in the range of 11.7°–56.2° and the crystal packing was stabilized by N–H···O hydrogen bonds. The synthesized diamines were then polymerized with three commercially available dianhydrides either by one-step solution technique or by two-step procedure involving ring-opening poly-addition to give polyamic acid followed by cyclic dehydration. The resulting poly(amide–imide)s were characterized by their elemental analyses and FTIR spectroscopy. The polymers possessed excellent chemical resistance and were found insoluble in almost all the common solvents tested except conc. H2SO4, in which these showed inherent viscosities in the range 0.47–0.73 dL g−1 at 28 °C. The thermal behavior of the polymers, investigated by the DSC and TG analyses, revealed that the products were stable up to 300 °C in nitrogen. The activation energies of pyrolysis, entropy, and enthalpy values for each of the synthesized polymers were also estimated by Horowitz and Metzger method using thermal degradation data. These values were high exhibiting the remarkable thermal stability of the poly(amide–imide)s. Wide-angle X-ray studies of the polymers were also carried out which provided information about their morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Synthesis and properties of polymers · Synthetic Organic Chemistry Methods · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Feger C, Khojasteh MM, McGrath JE (1989) Polyimides: materials chemistry and characterization. Elsevier, Amsterdam
2. Bessonv MI, Kotton MM, Kudryavtsev VV, Laius LA (1987) Polyimides: thermally stable polymers. Consultants Bureau, New York10.1007/978-1-4615-7634-1 ↗
3. Mittal KL (1984) Polyimides: synthesis, characterization and applications, vol 1 & 2. Plenum, New York10.1007/978-1-4615-7637-2 ↗
4. Wilson D, Stenzenberger HD, Hergenrother PM (1990) Polyimides. Blackie, Glasgow and London10.1007/978-94-010-9661-4 ↗
5. Yin DX, Li YF, Yang HX, Yang SY (2005) Polymer 46:311910.1016/j.polymer.2005.02.043 ↗
6. Yang CP, Chen RS (2002) J Polym Sci Polym Chem 40:42910.1002/pola.10116 ↗
7. Madhra MK, Salunke AK, Banerjee S, Prabha S (2002) Macromol Chem Phys 203:123810.1002/1521-3935(200206)203:9<1238::AID-MACP1238>3.0.CO;2-R ↗
8. Ghosh MK, Mittal KL (1996) Polyimides; fundamentals and applications. Marcel Decker, New York
9. Ayala D, Lozano AE, De Abajo J, de la Campa JG (1999) J Polym Sci Part A Polym Chem 37:80510.1002/(SICI)1099-0518(19990315)37:6<805::AID-POLA16>3.0.CO;2-9 ↗
10. Hsiao SH, Li CT (1999) Macromolecules 31:721310.1021/ma980649c ↗
11. Yang CP, Su YY, Hsiao FZ (2004) Polymer 45:752910.1016/j.polymer.2004.08.062 ↗
12. Yang CP, Hsiao SC, Tsai CY, Liou GS (2004) J Polym Sci Part A Polym Chem 42:241610.1002/pola.20116 ↗
13. Yang CP, Hsiao SH, Wu KL (2003) Polymer 44:706710.1016/j.polymer.2003.08.032 ↗
14. Kricheldorf HR, Linzer V (1995) Polymer 36:189310.1016/0032-3861(95)90937-W ↗
15. Chun BW (1994) Polymer 35:420310.1016/0032-3861(94)90597-5 ↗
16. Yamada M, Kusama M, Matsumoto T, Kurosaki T (1993) Macromolecules 26:496110.1021/ma00070a034 ↗
17. Matsumoto T, Kurosaki T (1996) React Funct Polym 30:5510.1016/1381-5148(96)00021-1 ↗
18. Volksen W, Cha HJ, Sanchez MI, Yoon DY (1996) React Funct Polym 30:6110.1016/1381-5148(96)00024-7 ↗
19. Li F, Fang S, Ge JJ, Honigfort PS, Chen JC, Harris FW, Cheng SZD (1999) Polymer 40:457110.1016/S0032-3861(99)00066-X ↗
20. Chou CH, Reddy DS, Shu CF (2002) J Polym Sci Part A Polym Chem 40:361510.1002/pola.10431 ↗
21. Lin SH, Li F, Cheng SZD, Harris FW (1998) Macromolecules 31:208010.1021/ma971396a ↗
22. Chung IS, Kim SY (2000) Macromolecules 33:319010.1021/ma991561h ↗
23. Hasegawa M, Sensui N, Shido Y, Yokota R (1999) Macromolecules 32:38710.1021/ma9808629 ↗
24. Zheng HB, Wang ZY (2000) Macromolecules 33:431010.1021/ma000185u ↗
25. Liou GS, Maruyama M, Kakimoto M, Imai Y (1998) J Polym Sci Part A Polym Chem 36:202110.1002/(SICI)1099-0518(19980915)36:12<2021::AID-POLA7>3.0.CO;2-# ↗
26. Mehdipour-Ataei S, Keshavarz S (2003) J Appl Polym Sci 89:256710.1002/app.12241 ↗
27. Xiao J, Wan X, Zhang D, Zhou QF, Turner SR (2001) J Polym Sci Part A Polym Chem 39:40810.1002/1099-0518(20010201)39:3<408::AID-POLA1008>3.0.CO;2-L ↗
28. Xiao J, Wan X, Zhang D, Zhang H, Zhou QF, Turner SR (2002) J Polym Sci Part A Polym Chem 40:85210.1002/pola.10169 ↗
29. Yang CP, Su YY (2005) J Polym Res 12:1710.1007/s10965-004-8125-0 ↗
30. Mehdipour-Ataei S, Zigheimat F (2007) Eur Polym J 43:102010.1016/j.eurpolymj.2006.11.034 ↗
31. Hajipour AR, Zahmatkesh S, Ruoho AE (2006) Polym Bull 57:110.1007/s00289-006-0529-z ↗
32. Shina MH, Huang JW, Huang MC, Kang CC, Chen WC, Yeh MY (2008) Polym Bull 60:59710.1007/s00289-008-0895-9 ↗
33. Aleksandrova EL, Goikhman MY, Subbotina LI, Romashkova KA, Gofman IF, Kudryavtsev VV, Yakimanskii AV (2003) Semiconductors 37:82110.1134/1.1592858 ↗
34. Billerbeck CJ, Henke SJ (1985) Engineering thermoplastics. Dekker, New York
35. Burrell H (1970) In: Mark HF, Gaylord NG, Bikales NM et al (eds) Encyclopedia of polymer science and technology, vol 12. John Wiley & Sons, New York
36. Butt MS, Akhter Z, Zaman MZ, Munir A (2005) Eur Polym J 41:163810.1016/j.eurpolymj.2005.01.016 ↗
37. Morgan PW (1965) Condensation polymers by interfacial and solution methods. New York, Interscience
38. Mehdipour-Ataei S, Bahri-Laleh N, Amirshaghaghi A (2006) Polym Degrad Stab 91:262210.1016/j.polymdegradstab.2006.05.004 ↗
39. Jeong KU, Kim JJ, Yoon TH (2001) Polymer 42:601910.1016/S0032-3861(01)00012-X ↗
40. Lee CW, Kwak SM, Yoon TH (2006) Polymer 47:414010.1016/j.polymer.2006.03.002 ↗
41. Jeong KU, Jo YJ, Yoon TH (2001) J Polym Sci Polym Chem 39:333510.1002/pola.1316 ↗
42. Saeed MA, Akhter Z, Khan MS, Iqbal N, Butt MS (2008) Polym Degrad Stab 93:176210.1016/j.polymdegradstab.2008.07.026 ↗
43. Butt MS, Akhter Z, Zaman MZ, Siddiqi HM (2008) Colloid Polym Sci 286:145510.1007/s00396-008-1911-1 ↗
44. Leu WT, Hsiao SH (2006) Eur Polym J 42:32810.1016/j.eurpolymj.2005.07.008 ↗
45. Horowitz HH, Metzger G (1963) Anal Chem Anal Chem 35:146410.1021/ac60203a013 ↗
46. Mehdipour-Ataei S, Hatami M (2005) Eur Polym J 41:201010.1016/j.eurpolymj.2005.03.012 ↗
47. Mehdipour-Ataei S, Bahri-Laleh N, Hassan A (2006) Eur Polym J 42:234310.1016/j.eurpolymj.2006.06.006 ↗