journal article·2010-07

Effect of rolling speed on the occurrence of strain aging during and after warm rolling of a low-carbon steel

B. Koohbor, D. Ohadi, S. Serajzadeh, J. M. Akhgar

Journal of Materials Science· Volume 45· Issue 13
Publisher page

Abstract

In this study, effect of rolling speed on strain aging phenomena in warm rolling of a carbon steel has been investigated. For this purpose, by using a mathematical model and predicting temperature and strain rate fields, the possibility of occurrence of dynamic strain aging during the warm rolling was first evaluated. In the next stage, warm-rolled samples were aged up to 11 months at room temperature for studying the kinetics of static strain aging, while mechanical tests as well as microstructural evolutions have been performed to determine the effect of strain aging on material behavior. The results indicate that dynamic strain aging may not occur for the employed rolling program; however, static strain aging takes place after warm rolling leading to changes in the mechanical behavior of the warm-deformed samples. In addition, by increasing rolling speed, the aging time required to achieve the maximum hardness increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Robinson JM, Shaw MP (1994) Int Mater Rev 39:11310.1179/imr.1994.39.3.113 ↗
2. Leslie WC (1983) The physical metallurgy of steels. McGraw Hill, Tokyo
3. Mura T, Lautenschlager EA, Brittain JO (1961) Acta Metall 9:45310.1016/0001-6160(61)90140-7 ↗
4. Hall EO (1970) Yield point phenomenon in metals and alloys. Macmillan, London10.1007/978-1-4684-1860-6 ↗
5. Staiger MP, Brownrigg A, Hodgeson PD, Davies CHJ (2004) Mater Sci Eng A 364:3510.1016/j.msea.2003.06.001 ↗
6. Pan CL, Wu S, Yu WW (2001) Thin-Walled Struct 39:42910.1016/S0263-8231(01)00004-0 ↗
7. Taheri AK, Maccagno TM, Jonas JJ (1995) Mater Sci Eng 11:1139
8. Taheri AK, Maccagno TM, Jonas JJ (1995) Metall Mater Trans A 26:118310.1007/BF02670614 ↗
9. Gorni AA, Mei PR (2008) J Mater Process Technol 197:37410.1016/j.jmatprotec.2007.06.037 ↗
10. Gunduz S (2008) Mater Sci Eng A 486:6310.1016/j.msea.2007.08.056 ↗
11. Li CC, Leslie WC (1978) Metall Trans A 9:176510.1007/BF02663406 ↗
12. Humphreys AO, Liu DS, Toroghinezhad MR, Jonas JJ (2002) ISIJ Int 42(Supplement):S5210.2355/isijinternational.42.Suppl_S52 ↗
13. Gonzalez BM, Marchi LA, Fonseca EJ, Modenesi PJ, Buono VTL (2003) ISIJ Int 43:42810.2355/isijinternational.43.428 ↗
14. Serajzadeh S (2004) Mater Sci Eng A 371:31810.1016/j.msea.2003.12.007 ↗
15. Lenard JG, Pietrzyk M, Cser L (1999) Mathematical and physical simulation of the properties of hot rolled products. Elsevier, Oxford
16. Dunne F, Petrinic N (2006) Introduction to computational plasticity. Oxford University Press, New York
17. Hibbitt (2004) ABAQUS User’s Manual, Version 6.5, ABAQUS Inc., USA
18. Prasad YVRK, Sasidhara S (eds) (1997) Hot working Guide, ASM International, Materials Park, OH 447073-0002