Effect of sintering on TiO2-impregnated alumina foams
Source abstract
Abstract
The effect of sintering on the bulk properties, morphology and phase composition of ultralight Al2O3 foams impregnated with TiO2 was investigated in comparison with pure alumina foam in the temperature range of 900–1600°C in air. Impregnation was carried out by immersion of pre-sintered alumina foam in a sol of titanium isopropoxide-acetylacetone complex. The changes of the foam linear shrinkage, effective density and porosity were studied along with morphological evolution and relationship between these properties was demonstrated. Titania impregnation increased the linear shrinkage (LS) during sintering by a maximum of 5% relative to pure alumina foams. The change of LS and weight loss of TiO2/Al2O3 foams lead to a final density of 0.19 g/cm3 and porosity of 95%. The initial coating was found to develop a mosaic structure due to early shrinkage of the coating. After sintering at 1600°C the coating reacted with the underlying Al2O3 surface and became uniformly distributed. Finally, it was shown that the reacting TiO2 layer formed the tialite (Al2TiO5) phase below 1400°C. This Tialite coating remained intact under 1200°C without stabilizers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L. J. GIBSON and M. F. ASHBY, “Cellular Solids, ” 2nd ed. (Cambridge University Press, 1997).10.1017/CBO9781139878326 ↗
2. G. S. GRADER, G. E. SHTER and Y. DE HAZAN, Israeli Patent Application no. 123969 (1998).
3. Idem., J. Mater. Res. 14 (1999) 1485.10.1557/JMR.1999.0199 ↗
4. R. J. H. CLARK, “The Chemistry of Titanium and Vanadium” (University College, London, 1968).
5. R. D. BAGLEY, I. B. CUTLER and D. L. JOHNSON, J. Amer. Ceram. Soc. 53 (1970) 136.10.1111/j.1151-2916.1970.tb12055.x ↗
6. W. S. YOUNG and I. B. CUTLER, ibid. 53 (1970) 659.10.1111/j.1151-2916.1970.tb12036.x ↗
7. W. D. KINGERY, “Introduction to Ceramics” (John Wiley & Sons, New York, 1967).
8. J. LIVAGE and C. SANCHEZ, J. Non Crystalline Solids 145 (1992) 11.10.1016/S0022-3093(05)80422-3 ↗
9. P. SEPULVEDA, The Am. Ceram. Soc. Bul. 76 (1997) 61.
10. S. M. LANG, C. L. FILLMORE and L. H. MAXWELL, J. Res. Nat. Bur. Stand. 48 (1952) 298.10.6028/jres.048.038 ↗
11. M. CRISAN, M. ZAHARESCU, A. JITIANU, D. CRISAN and M. PREDA, J. Sol-Gel Sci. and Tech. 19 (2000) 409.10.1023/A:1008735127136 ↗
12. S. LICOCCIA, M. L. DI VONA, E. TRAVERSA, P. INNOCENZI and A. MARTUCCI, ibid. 19 (2000) 577.10.1023/A:1008705109815 ↗
13. M. ANDRIANAINARIVELO, R. J. P. CORRIU, D. LECLERCQ, P. H. MUTIN and A. VIOUX, ibid. 8 (1997) 89.10.1023/A:1026411424012 ↗
14. M. MANN, G. E. SHTER and G. S. GRADER, J. Mater. Res. 17(4) (2002) 831.10.1557/JMR.2002.0121 ↗