Phase development of silicon oxycarbide nanocomposites during flash pyrolysis
Source abstract
Abstract
This work is focused on phase development of silicon oxycarbide (SiOC) nanocomposites during flash pyrolysis. Three important variables evaluated are applied electric field, current limit, and pyrolysis temperature. They significantly facilitate the microstructure evolution of SiOC and cause the formation of more ordered carbon and SiC phases at > 640 °C lower temperature than the typical pyrolysis process. With the increase in the applied electric field, pyrolysis temperature, and current density, the mass loss is higher, the SiC formation and carbon precipitation are more extensive, and the carbon phase is more ordered. The resulting SiOC samples are stable up to 742 °C in air. The fundamental cause is due to the drastically accelerated nucleation rate for both the C and SiC phases from the applied electrical field, through the mechanisms of Joule heating and electromigration. This work provides an accelerated route to synthesize high-temperature SiOC nanocomposites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Li J, Lu K (2015) Highly porous SiOC bulk ceramics with water vapor assisted pyrolysis. J Am Ceram Soc 98(8):2357–236510.1111/jace.13634 ↗
2. Soraru GD, Dallapiccola E, Andrea GD (1996) mechanical characterization of sol–gel-derived silicon oxycarbide glasses. J Am Ceram Soc 79(8):2074–208010.1111/j.1151-2916.1996.tb08939.x ↗
3. Esfehanian M, Oberacker R, Fett T, Hoffmann MJ (2008) Development of dense filler-free polymer-derived SiOC ceramics by field-assisted sintering. J Am Ceram Soc 91(11):3803–380510.1111/j.1551-2916.2008.02730.x ↗
4. Clark MD, Walker LS, Hadjiev VG, Khabashesku V, Corral EL, Krishnamoorti R (2011) Fast sol–gel preparation of silicon carbide–silicon oxycarbide nanocomposites. J Am Ceram Soc 94(12):4444–445210.1111/j.1551-2916.2011.04707.x ↗
5. Du B, Hong CQ, Zhang XH, Wang JZ, Qu Q (2018) Preparation and mechanical behaviors of SiOC-modified carbon-bonded carbon fiber composite with in situ growth of three-dimensional SiC nanowires. J Eur Ceram Soc 38(5):2272–227810.1016/j.jeurceramsoc.2018.01.002 ↗
6. Lu K, Erb D, Liu MY (2016) Thermal stability and electrical conductivity of carbon-enriched silicon oxycarbide. J Mater Chem C 4(9):1829–183710.1039/C6TC00069J ↗
7. Colombo P, Mera G, Riedel R, Soraru GD (2010) Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc 93(7):1805–183710.1111/j.1551-2916.2010.03876.x ↗
8. Zhu SM, Ding SQ, Xi HA, Wang RD (2005) Low-temperature fabrication of porous SiC ceramics by preceramic polymer reaction bonding. Mater Lett 59(5):595–59710.1016/j.matlet.2004.11.003 ↗
9. Kawamura F, Yamane H, Yamada T, Yin S, Sato T (2008) Low-temperature fabrication of porous beta-SiC ceramics in sodium vapor. J Am Ceram Soc 91(1):51–5510.1111/j.1551-2916.2007.02021.x ↗
10. Kim KJ, Lee S, Lee JH, Roh MH, Lim KY, Kim YW (2009) Structural and optical characteristics of crystalline silicon carbide nanoparticles synthesized by carbothermal reduction. J Am Ceram Soc 92(2):424–42810.1111/j.1551-2916.2008.02913.x ↗
11. Yang K, Yang Y, Lin ZM, Li JT, Du JS (2007) Mechanical-activation-assisted combustion synthesis of SiC powders with polytetrafluoroethylene as promoter. Mater Res Bull 42(9):1625–163210.1016/j.materresbull.2006.11.037 ↗
12. Brequel H, Parmentier J, Soraru GD, Schiffini L, Enzo S (1999) Study of the phase separation in amorphous silicon oxycarbide glasses under heat treatment. Nanostruct Mater 11(6):721–73110.1016/S0965-9773(99)00360-8 ↗
13. Saha A, Raj R (2007) Crystallization maps for SiCO amorphous ceramics. J Am Ceram Soc 90(2):578–58310.1111/j.1551-2916.2006.01423.x ↗
14. Saha A, Raj R, Williamson DL (2006) A model for the nanodomains in polymer-derived SiCO. J Am Ceram Soc 89(7):2188–219510.1111/j.1551-2916.2006.00920.x ↗
15. Brequel H, Parmentier J, Walter S, Badheka R, Trimmel G, Masse S, Latournerie J, Dempsey P, Turquat C, Desmartin-Chomel A, Le Neindre-Prum L, Jayasooriya UA, Hourlier D, Kleebe HJ, Soraru GD, Enzo S, Babonneau F (2004) Systematic structural characterization of the high-temperature behavior of nearly stoichiometric silicon oxycarbide glasses. Chem Mater 16(13):2585–259810.1021/cm049847a ↗
16. Cologna M, Rashkova B, Raj R (2010) Flash sintering of nanograin zirconia in < 5 s at 850 °C. J Am Ceram Soc 93(11):3556–355910.1111/j.1551-2916.2010.04089.x ↗
17. Raj R (2012) Joule heating during flash-sintering. J Eur Ceram Soc 32(10):2293–230110.1016/j.jeurceramsoc.2012.02.030 ↗
18. Grasso S, Sakka Y, Rendtorff N, Hu CF, Maizza G, Borodianska H, Vasylkiv O (2011) Modeling of the temperature distribution of flash sintered zirconia. J Ceram Soc Jpn 119(1386):144–14610.2109/jcersj2.119.144 ↗
19. Mazo MA, Palencia C, Nistal A, Rubio F, Rubio J, Oteo JL (2012) Dense bulk silicon oxycarbide glasses obtained by spark plasma sintering. J Eur Ceram Soc 32(12):3369–337810.1016/j.jeurceramsoc.2012.03.033 ↗
20. Sujith R, Srinivasan N, Kumar R (2013) Small-scale deformation of pulsed electric current sintered silicon oxycarbide polymer derived ceramics. Adv Eng Mater 15(11):1040–104510.1002/adem.201300146 ↗
21. Wang B, Wolfe DE, Terrones M, Haque MA, Ganguly S, Roy AK (2017) Electro-graphitization and exfoliation of graphene on carbon nanofibers. Carbon 117:201–20710.1016/j.carbon.2017.02.086 ↗
22. Cologna M, Francis JSC, Raj R (2011) Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping. J Eur Ceram Soc 31(15):2827–283710.1016/j.jeurceramsoc.2011.07.004 ↗
23. Francis JSC, Raj R (2012) Flash-sinterforging of nanograin zirconia: field assisted sintering and superplasticity. J Am Ceram Soc 95(1):138–14610.1111/j.1551-2916.2011.04855.x ↗
24. Yoshida H, Sakka Y, Yamamoto T, Lebrun JM, Raj R (2014) Densification behaviour and microstructural development in undoped yttria prepared by flash-sintering. J Eur Ceram Soc 34(4):991–100010.1016/j.jeurceramsoc.2013.10.031 ↗
25. Torabi M, Sadrnezhaad SK (2011) Electrochemical evaluation of nanocrystalline Zn-doped tin oxides as anodes for lithium ion microbatteries. J Power Sources 196(1):399–40410.1016/j.jpowsour.2010.06.028 ↗
26. Erb D, Lu K (2017) Additive and pyrolysis atmosphere effects on polysiloxane-derived Porous SiOC ceramics. J Eur Ceram Soc 37(15):4547–455710.1016/j.jeurceramsoc.2017.06.036 ↗
27. Lu K (2015) Porous and high surface area silicon oxycarbide-based materials—a review. Mater Sci Eng R 97:23–4910.1016/j.mser.2015.09.001 ↗
28. Lu K, Erb D, Liu MY (2016) Phase transformation, oxidation stability, and electrical conductivity of TiO2-polysiloxane derived ceramics. J Mater Sci 51(22):10166–10177. https://doi.org/10.1007/s10853-016-0244-610.1007/s10853-016-0244-6 ↗
29. Brewer CM, Bujalski DR, Parent VE, Su K, Zank GA (1999) Insights into the oxidation chemistry of SiOC ceramics derived from silsesquioxanes. J Sol Gel Sci Technol 14(1):49–6810.1023/A:1008723813991 ↗
30. Naik KS, Sglavo VM, Raj R (2014) Flash sintering as a nucleation phenomenon and a model thereof. J Eur Ceram Soc 34(15):4063–406710.1016/j.jeurceramsoc.2014.04.043 ↗
31. Kleykamp H (1998) Gibbs energy of formation of SiC: a contribution to the thermodynamic stability of the modifications. Ber Bunsen Phys Chem 102(9):1231–123410.1002/bbpc.19981020928 ↗
32. Tavakoli AH, Armentrout MM, Narisawa M, Sen S, Navrotsky A (2015) White Si–O–C ceramic: structure and thermodynamic stability. J Am Ceram Soc 98(1):242–24610.1111/jace.13233 ↗
33. Pradere C, Batsale JC, Goyhénèche JM, Pailler R, Dilhaire S (2009) Thermal properties of carbon fibers at very high temperature. Carbon 47(3):737–74310.1016/j.carbon.2008.11.015 ↗
34. Sazali NES, Deraman M, Omar R, Othman MAR, Suleman M, Shamsudin SA, Tajuddin NSM, Hanappi MFYM, Hamdan E, Nor NSM, Basri NH (2016) Preparation and structural characterization of turbostratic-carbon/graphene derived from amylose film. AIP Conf Proc 1784(1):04000910.1063/1.4966795 ↗
35. Kay DAR, Taylor J (1960) Activities of silica in the lime + alumina + silica system. Trans Faraday Soc 56(9):1372–138610.1039/tf9605601372 ↗
36. Minnear WP (1982) Interfacial energies in the Si/SiC system and the Si + C reaction. J Am Ceram Soc 65(1):C10–C1110.1111/j.1151-2916.1982.tb09930.x ↗
37. Kim T, Lee J, Lee K-H (2016) Full graphitization of amorphous carbon by microwave heating. RSC Adv 6(29):24667–2467410.1039/C6RA01989G ↗
38. Fisher JC, Hollomon JH, Turnbull D (1948) Nucleation. J Appl Phys 19(8):775–78410.1063/1.1698202 ↗
39. Pan JM, Pan JF, Cheng XN, Yan XH, Lu QB, Zhang CH (2014) Synthesis of hierarchical porous silicon oxycarbide ceramics from preceramic polymer and wood biomass composites. J Eur Ceram Soc 34(2):249–25610.1016/j.jeurceramsoc.2013.08.004 ↗
40. Roth F, Waleska P, Hess C, Ionescu E, Nicoloso N (2016) UV Raman spectroscopy of segregated carbon in silicon oxycarbides. J Ceram Soc Jpn 124(10):1042–104510.2109/jcersj2.16100 ↗
41. Larouche N, Stansfield BL (2010) Classifying nanostructured carbons using graphitic indices derived from Raman spectra. Carbon 48(3):620–62910.1016/j.carbon.2009.10.002 ↗
42. Ferrari AC, Robertson J (2000) Interpretation of Raman spectra of disordered and amorphous carbon. Phys Rev B 61(20):14095–1410710.1103/PhysRevB.61.14095 ↗
43. Cuesta A, Dhamelincourt P, Laureyns J, Martinez-Alonso A, Tascon JMD (1998) Comparative performance of X-ray diffraction and raman microprobe techniques for the study of carbon materials. J Mater Chem 8(12):2875–287910.1039/a805841e ↗
44. Tuinstra F, Koenig JL (1970) Raman spectrum of graphite. J Chem Phys 53(3):1126–113010.1063/1.1674108 ↗
45. Zhang XF, Yan QG, Leng WQ, Li JH, Zhang JL, Cai ZY, Hassan E (2017) Carbon nanostructure of kraft lignin thermally treated at 500 to 1000 °C. Materials 10(8):97510.3390/ma10080975 ↗
46. Jia X, Hofmann M, Meunier V, Sumpter BG, Campos-Delgado J, Romo-Herrera JM, Son H, Hsieh Y-P, Reina A, Kong J, Terrones M, Dresselhaus MS (2009) Controlled formation of sharp zigzag and armchair edges in graphitic nanoribbons. Science 323(5922):1701–170510.1126/science.1166862 ↗
47. Wang BM, Haque MA, Mag-isa AE, Kim JH, Lee HJ (2015) High temperature and current density induced degradation of multi-layer graphene. Appl Phys Lett 107(16):16310310.1063/1.4934260 ↗
48. Huang YF, Deng ZX, Wang WL, Liang CL, She JC, Deng SZ, Xu NS (2015) Field-induced crystalline-to-amorphous phase transformation on the Si nano-apex and the achieving of highly reliable si nano-cathodes. Sci Rep UK 5:1063110.1038/srep10631 ↗
49. de Orio RL, Ceric H, Selberherr S (2010) Physically based models of electromigration: from black’s equation to modern TCAD models. Microelectron Reliab 50(6):775–78910.1016/j.microrel.2010.01.007 ↗
50. Wadey JD, Markevich A, Robertson A, Warner J, Kirkland A, Besley E (2016) Mechanisms of monovacancy diffusion in graphene. Chem Phys Lett 648:161–16510.1016/j.cplett.2016.02.005 ↗
51. Tian WC, Li WH, Yu WB, Liu XH (2017) A review on lattice defects in graphene: types, generation, effects and regulation. Micromachines Basel 8(5):1–15