Quasi-static and shock-wave loading of ultrafine-grained aluminum: effect of microstructural characteristics
Source abstract
Abstract
The interrelation between microstructural characteristics and mechanical properties under quasi-static and shock-wave (dynamic) loading was investigated in ultrafine-grained aluminum processed by accumulative roll bonding (ARB) for 4, 7, 10 and 14 cycles. The microstructural parameters such as the size of the elements of grain–subgrain structure, grain size and fraction of high-angle grain boundaries were obtained using transmission electron microscopy (TEM) and electron back scatter diffraction (EBSD). Indentation and tensile tests at the strain rate of 1 × 10−4 s−1 were applied as the quasi-static loading, the impact by aluminum flyer-plates with the impact velocity of 620 ± 30 m s−1 was the shock-wave loading. The strain rate in the rarefaction wave before spall fracture was 2 × 105–7 × 105 s−1 in the latter case. It is shown that the dislocation substructures and low-angle subboundaries significantly affect the strength properties under quasi-static conditions, while the grain size (the areas bounded by only high-angle boundaries) and fraction of high-angle grain boundaries mainly define the dynamic strength properties. The different influence of the microstructural characteristics on the quasi-static and dynamic mechanical properties is related to the easier dislocation cross-slip under high strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Estrin Y, Vinogradov A (2013) Extreme grain refinement by severe plastic deformation: a wealth of challenging science. Acta Mater 61:782–81710.1016/j.actamat.2012.10.038 ↗
2. Meyers MA, Mishra A, Benson DJ (2006) Mechanical properties of nanocrystalline materials. Prog Mater Sci 51:427–55610.1016/j.pmatsci.2005.08.003 ↗
3. Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–98110.1016/j.pmatsci.2006.02.003 ↗
4. Wang L, Wang YC, Zhilyaev AP, Korznikov AV, Li SK, Korznikova E, Langdon TG (2014) Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression. Scripta Mater 77:33–3610.1016/j.scriptamat.2014.01.011 ↗
5. Wang L, Wang Y, Zhilyaev AP, Korznikov AV, Li S, Korznikova E, Langdon TG (2014) Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP. J Mater Sci 49(19):6640–6647. https://doi.org/10.1007/s10853-014-8306-010.1007/s10853-014-8306-0 ↗
6. Zhang S, Wang YC, Zhilyaev AP, Korznikova E, Li S, Raab GI, Langdon TG (2015) Temperature and strain rate dependence of microstructural evolution and dynamic mechanical behavior in nanocrystalline Ti. Mater Sci Eng A 641:29–3610.1016/j.msea.2015.06.035 ↗
7. Zhang S, Wang YC, Zhilyaev AP, Korznikova E, Li S, Raab GI, Langdon TG (2015) Effect of grain size on compressive behaviour of titanium at different strain rates. Mater Sci Eng A 645:311–31710.1016/j.msea.2015.08.031 ↗
8. Pereira PHR, Wang YC, Huang Y, Langdon TG (2017) Influence of grain size on the flow properties of an Al–Mg–Sc alloy over seven orders of magnitude of strain rate. Mater Sci Eng A 685:367–37610.1016/j.msea.2017.01.020 ↗
9. Afifi MA, Pereira PHR, Wang YC, Wang Y, Li S, Langdon TG (2016) Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al–Zn–Mg alloy. Mater Sci Eng A 684:617–62510.1016/j.msea.2016.12.099 ↗
10. Kanel GI, Razorenov SV, Fortov VE (2004) Shock-wave phenomena and properties of condensed matter. Springer, New York, p 32110.1007/978-1-4757-4282-4 ↗
11. Baumung K, Bluhm HJ, Hoppé P, Karow HU, Rusch D, Stoltz O, Singer J, Kanel GI, Utkin AV, Razorenov SV, Fortov VE (1995) Hypervelocity launching and impact experiments on the Karlsruhe light ion facility KALIF. Int J Impact Eng 17:37–4610.1016/0734-743X(95)99833-D ↗
12. Dudarev EF, Kashin OA, Markov AB, Mayer AE, Tabachenko AN, Girsova NV, Bakach GP, Kitsanov SA, Zhorovkov MF, Skosyrskii AB, Pochivalova GP (2011) Deformation behavior and spalling fracture of a heterophase aluminum alloy with ultrafine-grained and coarse-grained structure subjected to a nanosecond relativistic high-current electron beam. Russ Phys J 54:713–72010.1007/s11182-011-9674-4 ↗
13. Garkushin GV, Razorenov SV, Ignatova ON, Kanel GI, Meyer LW (2010) Submicrosecond strength of ultrafine-grained materials. Mech Solids 45:624–63210.3103/S0025654410040114 ↗
14. Williams CL, Sano T, Walter TR, Bradley J, Kecskes LJ (2016) The Role of second phase intermetallic particles on the spall failure of 5083 aluminum. J Dyn Behav Mater 2:476–48310.1007/s40870-016-0082-2 ↗
15. Brodova IG, Petrova AN, Razorenov SV, Shorokhov EV (2015) Resistance of submicrocrystalline aluminum alloys to high-rate deformation and fracture after dynamic channel angular pressing. Phys Met Metallogr 116:519–52610.1134/S0031918X15050051 ↗
16. Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Mater 39:1221–122710.1016/S1359-6462(98)00302-9 ↗
17. Humphreys FJ (2001) Grain and subgrain characterisation by electron backscatter diffraction. J Mater Sci 36:3833–3854. https://doi.org/10.1023/A:1017973432592.pdf10.1023/A:1017973432592 ↗
18. Antoun T, Seaman L, Curran DR, Kanel GI, Razorenov SV, Utkin AV (2003) Spall fracture. Springer, New York, p 304
19. Eckner R, Reichel B, Savinykh AS, Kruger L, Razorenov SV, Garkushin GV (2016) Microstructure of CrMnNi cast steel after explosive-driven flyer-plate impact at room temperature and below. Metall Mater Trans A 47A:75–8310.1007/s11661-015-3222-8 ↗
20. Barker LM, Hollenbach RE (1972) Laser interferometry for measuring high velocities of any reflecting surface. J Appl Phys 43:4669–467510.1063/1.1660986 ↗
21. Kawasaki M, Horita Z, Langdon TG (2009) Microstructural evolution in high purity aluminum processed by ECAP. Mater Sci Eng A 524:143–15010.1016/j.msea.2009.06.032 ↗
22. Ivanov KV, Naydenkin EV (2014) Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing. Mater Sci Eng A 606:313–32110.1016/j.msea.2014.03.114 ↗
23. Zhilyaev AP, Swisher DL, Oh-ishi K, Langdon TG, McNelley TR (2006) Microtexture and microstructure evolution during processing of pure aluminum by repetitive ECAP. Mater Sci Eng A 429:137–14810.1016/j.msea.2006.05.009 ↗
24. Hoppel HW, May J, Goken M (2004) Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bonding. Adv Eng Mater 6:781–78410.1002/adem.200306582 ↗
25. Schmidt CW, Knieke C, Maier V, Hoppel HW, Peukert W, Goken M (2011) Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement. Scripta Mater 64:245–24810.1016/j.scriptamat.2010.10.013 ↗
26. Marsh SP (1980) LASL shock Hugoniot data. University of California Press, Berkeley, p 658
27. Kanel GI (2010) Spall fracture: methodological aspects, mechanisms and governing factors. Int J Fract 163:173–19110.1007/s10704-009-9438-0 ↗
28. Razorenov SV, Kanel’ GI, Garkushin GV, Ignatova ON (2012) Resistance to dynamic deformation and fracture of tantalum with different grain and defect structures. Phys Solid State 54:790–79710.1134/S1063783412040233 ↗
29. Liu DH, Yu HP, Li CF (2012) Comparative study of the microstructure of 5052 aluminum alloy sheets under quasi-static and high-velocity tension. Mater Sci Eng A 551:280–28710.1016/j.msea.2012.05.018 ↗