Polymer dispersion preparation by flow induced phase inversion emulsification. Part 1 The effect of silica on emulsification and dispersion characteristics
Source abstract
Abstract
Low density polyethylene (LDPE) melt was emulsified in the presence of a hydrophobically modified water soluble polymer (HMWSP) and colloidal hydrophilic silica using the Flow Induced Phase Inversion (FIPI) emulsification technique. HMWSP was used as the surface active material. After the emulsification, LDPE melt was solidified to obtain a polymeric dispersion. Silica was used to aid the emulsification and improve the emulsion/dispersion characteristics. It was shown that the presence of silica increases the amount of aqueous phase necessary for phase inversion from water-in-LDPE melt to LDPE melt-in-water emulsion. The mean particle size and particle size span increased in the presence of silica. However, due to broader particle size distribution, the viscosity was lowered. The dispersions with silica appeared to form a more uniform film compared with the dispersion without silica. When the silica concentration is less than 1% in aqueous phase, an emulsion is obtained. At 2% silica level, a wet powdery material is obtained. This material can be diluted to obtain a dispersion or it could be used in powder coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. G. Akay and Li Tong, J. Colloid Intrf. Sci., submitted.
2. G. Akay, Chem. Eng. Sci. 53 (1998) 203.10.1016/S0009-2509(97)00199-1 ↗
3. Idem., European Patent 649867 (2000).
4. G. Akay and Li Tong, Chem. Eng. Tech. 23 (2000) 285.10.1002/(SICI)1521-4125(200003)23:3<285::AID-CEAT285>3.0.CO;2-0 ↗
5. G. Akay, A. Kazeem, S. Y. Chen and R. A. Choudhery, “Recent Advances in Particle Technology” (IChemE, UK, 1998) CD-Rom.
6. G. Akay, Polym. Eng. Sci. 30 (1990) 1361.10.1002/pen.760302106 ↗
7. Idem., ibid. 34 (1994) 865.10.1002/pen.760341102 ↗
8. M. Kawaguchi, A. Mizutani, Y. Matsushita and T. Kato, Langmuir 13 (1997) 6339.10.1021/la970387s ↗
9. E. Bourgeatlami, P. Espiard, A. Guyot, C. Gauthier, L. David and G. Vigier, Angew. Makromol. Chemie 242 (1996) 105.10.1002/apmc.1996.052420107 ↗
10. P. M. Dove and J. D. Rimstidt, in “Silica,” edited by P. J. Heaney, C. T. Prewitt and G. V. Gibbs (Washington DC-Mineralogical Society of America, 1994) p. 259. Reviews in Mineralogy Vol. 29.10.1515/9781501509698-013 ↗
11. R. K. Iler, “The Colloid Chemistry of Silica and Silicates” (Cornell University Press, New York, 1955).
12. Idem., “The Chemistry of Silica” (A Wiley-Interscience Publication, New York, 1979).
13. C. Amiel, M. Sikka, J. W. Jr. Schneider, Y. Tsao, M. Tirrell and J. W. Mays, Macromolecules 28 (1995) 3125.10.1021/ma00113a015 ↗
14. G. Akay, in “Polymer Powder Technology,” edited by M. Narkis and N. Rozenweig (Wiley, New York, 1998) p. 541.
15. Idem., US Patent 4 988 369(1991), European Patent 307 278 (1992) and Japanese Patent 94037634 (1994).
16. G. Akay, V. J. Price and S. Y. Chen, in “Recent Advances in Particle Technology” (IChemE, UK, 1998) CD-Rom.
17. B. R. Midmore, Colloids and Surfaces A-Physicochemical and Engineering Aspects 132 (1998) 257.
18. S. R. Raghavan, M. W. Riley, P. S. Fedkiw and S. A. Khan, Chem. Mater. 10 (1998) 244.10.1021/cm970406j ↗
19. G. Akay and R. J. Wakeman, J. Membr. Sci. 131 (1997) 229.10.1016/S0376-7388(97)00048-3 ↗
20. D. Campbell and J. R. White, “Polymer Characterization” (Chapman and Hall, New York, 1989).