Crystallographic orientation relationships and interfaces in laser-processed directionally solidified WC–W2C eutectoid ceramics
Source abstract
Abstract
Crystallographic orientation relationships and interfaces in directionally solidified WC–W2C eutectoids are investigated by electron microscopy and electron back-scattered diffraction. The WC–W2C eutectoids are prepared by a laser surface processing method, which unidirectionally melts and resolidifies ceramic powder substrates. Lamellar-type microstructures are observed in all samples with preferred nominal growth directions of [\( \overline{1} 2\overline{1} 0 \)]WC//[\( \overline{1} 2\overline{1} 0 \)]W2C along the solidification direction. The majority of interface habit planes are found to be (0001)WC//(0001)W2C. The interfaces are found to be semicoherent, with a misfit Burger’s vector of 1/3[\( 2{\bar{1}} {\bar{1}} 0 \)]. An intermediate layer is identified at the interface and is associated with a change in the stacking sequence of the close-packed (0001) tungsten planes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Llorca J, Orera V (2006) Directionally solidified eutectic ceramic oxides. Prog Mater Sci 51:711–80910.1016/j.pmatsci.2005.10.002 ↗
2. Stubican VS, Bradt RC (1980) Directional solidification of nonoxide eutectics. US Army Research Office Report
3. Pastor JY, Poza P, Llorca J, Peña JI (2001) Mechanical properties of directionally solidified Al2O3-ZrO2(Y2O3) eutectics. Mater Sci Eng A 308:241–24910.1016/S0921-5093(00)02040-2 ↗
4. Larrea A, Orera VM, Merino RI, Peña JI (2005) Microstructure and mechanical properties of Al2O3–YSZ and Al2O3–YAG directionally solidified eutectic plates. J Eur Ceram Soc 25:1419–142910.1016/j.jeurceramsoc.2005.01.021 ↗
5. Waku Y, Nakagawa N, Wakamoto T, Ohtsubo H, Shimizu K, Kohtoku Y (1998) High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite. J Mater Sci 33:1217–1225. doi: 10.1023/A:100437762634510.1023/A:1004377626345 ↗
6. Bogomol I, Nishimura T, Vasylkiv O et al (2009) Microstructure and high-temperature strength of B4C-TiB2 composite prepared by a crucibleless zone melting method. J Alloys Compd 485:677–68110.1016/j.jallcom.2009.06.044 ↗
7. White RM, Kunkle JM, Polotai AV, Dickey EC (2011) Microstructure and hardness scaling in laser-processed B4C–TiB2 eutectic ceramics. J Eur Ceram Soc 31:1227–123210.1016/j.jeurceramsoc.2010.06.013 ↗
8. Gunjishima I, Akashi T, Goto T (2002) Characterization of directionally solidified B4C-TiB2 composites prepared by a floating zone method. Mater Trans 43:712–72010.2320/matertrans.43.712 ↗
9. Li W, Tu R, Goto T (2005) Preparation of TiB2-SiC eutectic composite by an arc-melted method and its characterization. Mater Trans 46:2504–250810.2320/matertrans.46.2504 ↗
10. Ordanyan SS, Dmitriev AI, Stepanenko EK et al (1987) SiC-TiB2 system—A base of high-hardness wear-resistant materials. Sov Powder Metall Met Ceram 26:375–37710.1007/BF00797062 ↗
11. Ashbrook RL (1977) Directionally solidified ceramic eutectics. J Am Ceram Soc 60:428–43510.1111/j.1151-2916.1977.tb15527.x ↗
12. Jackson KA, Hunt JD (1966) Lamellar and rod eutectic growth. Trans Metall Soc Aime 236:1129–1142
13. Sorrell CC, Beratan HR, Bradt RC, Stubican VS (1984) Directional solification of (Ti, Zr) carbides-(Ti, Zr) diboride eutectics. J Am Ceram Soc 67:190–19410.1111/j.1151-2916.1984.tb19740.x ↗
14. Deng H, Dickey EC, Lewis N, Road B (2004) Crystallographic characterization and indentation mechanical properties of LaB6-ZrB2 directionally solidified eutectics. J Mater Sci 39:5987–5994. doi: 10.1023/B:JMSC.0000041695.40772.5610.1023/B:JMSC.0000041695.40772.56 ↗
15. White RM, Dickey EC (2011) The effects of residual stress distributions on indentation-induced microcracking in B4C-TiB2 eutectic ceramic composites. J Am Ceram Soc 94:4032–403910.1111/j.1551-2916.2011.04664.x ↗
16. Sorrell CC, Stubican VS, Bradt RC (1986) Mechanical properties of ZrC-ZrB2 and ZrC-TiB2 directionally solidified eutectics. J Am Ceram Soc 69:317–32110.1111/j.1151-2916.1986.tb04739.x ↗
17. Chen WT, Meredith CH, Dickey EC (2015) Growth and microstructure-dependent hardness of directionally solidified WC-W2C eutectoid ceramics. J Am Ceram Soc 98:2191–219610.1111/jace.13561 ↗
18. Kurlov AS, Gusev AI (2006) Tungsten carbides and W-C phase diagram. Inorg Mater 42:121–12710.1134/S0020168506020051 ↗
19. Rudy E, Hoffman JR (1967) Phasengleichgewichte im bereich der kubischen karbidphase im system wol-fram-kohlenstoff. Planseeber, Pulvermetall
20. Michalski A, Siemiaszko D (2007) Nanocrystalline cemented carbides sintered by the pulse plasma method. Int J Refract Met Hard Mater 25:153–15810.1016/j.ijrmhm.2006.03.007 ↗
21. Huang SG, Vanmeensel K, Van der Biest O, Vleugels J (2008) Binderless WC and WC–VC materials obtained by pulsed electric current sintering. Int J Refract Met Hard Mater 26:41–4710.1016/j.ijrmhm.2007.01.002 ↗
22. Taimatsu H, Sugiyama S, Kodaira Y (2008) Synthesis of W2C by reactive hot pressing and its mechanical properties. Mater Trans 49:1256–126110.2320/matertrans.MRA2007304 ↗
23. Mambo. Oxford Instruments HKL® (2006) HKL Technology. Denmark
24. Tango. Oxford Instruments HKL® (2006) HKL Technology. Denmark
25. Sang X, Oni AA, Lebeau JM (2014) Atom column indexing : atomic resolution image analysis through a matrix representation. Microsc Microanal 20:1764–177110.1017/S1431927614013506 ↗
26. DebRoy T, David SA (1995) Physical processes in fusion welding. Rev Mod Phys 67:85–11210.1103/RevModPhys.67.85 ↗
27. Polotai AV, Foreman JF, Dickey EC, Meinert K (2008) Laser surface processing of B4C-TiB2 eutectic. Int J Appl Ceram Technol 5:610–61710.1111/j.1744-7402.2008.02229.x ↗
28. Bourban S, Karapatis N, Hofmann H, Kurz W (1997) Solidification microstructure of laser remeled Al2O3-ZrO2 eutectic. Acta Metall 45:5069–5075
29. Kurlov AS, Gusev AI (2013) Tungsten carbide: structure, properties and application in hard metals. Springer, London10.1007/978-3-319-00524-9 ↗
30. Tanaka T, Otani S, Ishizawa Y (1988) Floating-zone crystal growth of WC. J Mater Sci 23:665–669. doi: 10.1007/BF0117470310.1007/BF01174703 ↗
31. Zhang M, Kelly P, Easton M, Taylor J (2005) Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model. Acta Mater 53:1427–143810.1016/j.actamat.2004.11.037 ↗
32. Dickey EC, Dravid VP, Nellist PD et al (1998) Three-dimensional atomic structure of NiO-ZrO2(cubic) interfaces. Acta Mater 46:1801–181610.1016/S1359-6454(97)00373-X ↗
33. Frageau M, Revcolevschi A (1983) Crystallography of the directionally solidified NiO-CaO eutectic. J Am Ceram Soc 66:C162–C16310.1111/j.1151-2916.1983.tb10627.x ↗
34. Dubois B, Dhalenne G, D’Yvoire F, Revcolevschi A (1986) Crystallography of the directionally solidified NiO-Gd2O3 eutectic. J Am Ceram Soc 69:C6–C810.1111/j.1151-2916.1986.tb04702.x ↗
35. Serrano-Zabaleta S, Laguna-Bercero MA, Ortega-San-Martín L, Larrea A (2014) Orientation relationships and interfaces in directionally solidified eutectics for solid oxide fuel cell anodes. J Eur Ceram Soc 34:2123–213210.1016/j.jeurceramsoc.2013.06.008 ↗
36. Fecht HJ, Gleiter H (1985) A lock-in model for the atomic structure of interphase boundaries between metals and ionic crystals. Acta Metall 33:557–56210.1016/0001-6160(85)90019-7 ↗
37. Minford WJ, Bradt RC, Stubican VS (1979) Crystallography and microstructure of directionally solidified oxide eutectics. J Am Ceram Soc 62:15410.1111/j.1151-2916.1979.tb19043.x ↗
38. Hay RS (2007) Orientation relationships between complex low symmetry oxides: geometric criteria and interface structure for yttrium aluminate eutectics. Acta Mater 55:991–100710.1016/j.actamat.2006.09.029 ↗
39. Hay RS, Matson LE (1994) Alumina/Yttrium-aluminum garnet crystallographic orientation relationships and interphase boundaries: observations and interpretation by geometric criteria. Acta Metall Mater 39:1981–199410.1016/0956-7151(91)90167-Y ↗