journal article·2016-06

Dynamic modulus and strain wave velocity in ballistic fibre strands

Menghe Miao

Journal of Materials Science· Volume 51· Issue 12
Publisher page

Abstract

Strain wave propagation velocity in fibre materials is a primary consideration in the design of body armours for ballistic protection. In this paper, we compare the strain wave propagation (sonic) velocities and moduli of parallel and twisted ballistic fibre strands (yarns) derived from quasi-static tensile test and strain wave pulse test. In parallel multifilament yarns, the individual fibres behave independently from each other, and the yarn sonic velocities and moduli derived from the two test methods match each other very closely. In yarns with a twisted structure by twisting multifilament yarn or by spinning short fibres, fibres in the yarns are compressed against each other and fibre-to-fibre friction plays a significant role. Consequently, the yarn sonic velocities and moduli determined by the strain wave pulse method are significantly greater than that derived from the quasi-static tensile method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Cheeseman BA, Bogetti TA (2003) Ballistic impact into fabric and compliant composite laminates. Compos Struct 61(1–2):161–17310.1016/S0263-8223(03)00029-1 ↗
2. Tabiei A, Nilakantan G (2008) Ballistic impact of dry woven fabric composites: a review. Appl Mech Rev 61(1):4567–458210.1115/1.2821711 ↗
3. Cavallaro PV (2011) Soft body armor: an overview of materials, manufacturing, testing, and ballistic impact dynamics. DTIC Document, New York10.21236/ADA549097 ↗
4. Cunniff PM (1992) An analysis of the system effects in woven fabrics under ballistic impact. Text Res J 62(9):495–50910.1177/004051759206200902 ↗
5. Das S, Jagan S, Shaw A, Pal A (2015) Determination of inter-yarn friction and its effect on ballistic response of para-aramid woven fabric under low velocity impact. Compos Struct 120:129–14010.1016/j.compstruct.2014.09.063 ↗
6. Manimala JM, Sun C (2014) Investigation of failure in Kevlar fabric under transverse indentation using a homogenized continuum constitutive model. Text Res J 84(4):388–39810.1177/0040517513503727 ↗
7. Duan Y, Keefe M, Bogetti T, Cheeseman B, Powers B (2006) A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact. Int J Impact Eng 32(8):1299–131210.1016/j.ijimpeng.2004.11.005 ↗
8. Gu B (2003) Analytical modeling for the ballistic perforation of planar plain-woven fabric target by projectile. Compos Part B 34(4):361–37110.1016/S1359-8368(02)00137-3 ↗
9. Cunniff PM (1999) Dimensionless parameters for optimization of textile-based armour systems. 18th international symposium on Ballistics, 15–19 November 1999, San Antonio, pp 1303–1310
10. Jacobs MJN, van Dingenen JLJ (2001) Ballistic protection mechanisms in personal armour. J Mater Sci 36:3137–314210.1023/A:1017922000090 ↗
11. Ballou JW, Silverman S (1944) Sound velocity measurements. Text Res J 14(9):282–29210.1177/004051754401400902 ↗
12. Charch WH, Moseley WW Jr (1959) Structure-property relationships in synthetic fibers: Part 1: structure as revealed by sonic observations. Text Res J 29:525–53510.1177/004051755902900701 ↗
13. Moseley W Jr (1960) The measurement of molecular orientation in fibers by acoustic methods. J Appl Polymer Sci 3(9):266–27610.1002/app.1960.070030902 ↗
14. Morgan HM (1962) Correlation of molecular orientation measurements in fibers by optical birefringence and pulse velocity methods. Text Res J 32:866–86810.1177/004051756203201014 ↗
15. Nolle AW (1947) Acoustic determination of the physical constants of Rubber-Like Materials. J Acoustical Soc Am 19(1):194–20110.1121/1.1916420 ↗
16. Lyons WJ (1949) Dynamic properties of filaments, yarns, and cords at sonic frequencies. Text Res J 19:123–13510.1177/004051754901900301 ↗
17. Chaikin M, Chamberlain NH (1955) The propogation of longitudinal stress pulses in textile fibres - part 2. J Text Inst Trans 46:44–6210.1080/19447027.1955.10750294 ↗
18. Hussain GFS, Iyer KRK, Patil NB (1982) Influence of mercerization and crosslinking on the dynamic and static moduli of cotton yarns. Text Res J 52:663–66510.1177/004051758205201009 ↗
19. Grujicic M, Arakere G, He T, Bell W, Glomski P, Cheeseman B (2009) Multi-scale ballistic material modeling of cross-plied compliant composites. Compos Part B 40(6):468–48210.1016/j.compositesb.2009.02.002 ↗
20. Bunsell AR (2009) Handbook of tensile properties of textile and technical fibres. Woodhead Publishing Limited, Cambridge10.1533/9781845696801 ↗
21. Hearle JWS, Grosberg P, Backer S (1969) Structural mechanics of fibers, yarns, and fabrics. Wiley-Interscience, New York
22. Hearle J, El-Behery H, Thakur V (1959) 6—the mechanics of twisted yarns: tensile properties of continuous-filament yarns. J Text Inst Trans 50(1):T83–T11110.1080/19447025908662487 ↗
23. El-Shiekh A (1974) The dynamic modulus and some other properties of viscose-polyester blends. Text Res J 43:343–35110.1177/004051757404400504 ↗