journal article·2016-04

Formation of a dominant Dillamore orientation in a multilayered aluminum by accumulative roll bonding

Pei-Ling Sun, Wan-Ju Li, Wei-Chih Hsu

Journal of Materials Science· Volume 51· Issue 7
Publisher page

Abstract

In the present work, we report for the first time the formation of a dominant Dillamore orientation in a multilayered high-purity aluminum (99.99 %) subjected to an ultra-high von Mises strain of 11.2 by accumulative roll bonding (ARB). This multilayered aluminum with an average layer thickness of 180 nm was produced from an original aluminum sheet thickness of 100 μm. Microstructure and texture evolutions during ARB processes were investigated in detail and the formation of a dominant orientation is explained. The grain boundary spacing was observed to reduce with increasing number of ARB cycles. However, after 8 ARB cycles, the average grain boundary spacing was measured to be larger than the theoretical layer thickness. Also, a single and strong Cu orientation formed after an intermediate number (8–12) of ARB cycles, which rotated to a dominant Dillamore orientation with further ARB cycles. This is rationalized on the basis of three mechanisms: First, a homogeneous deformation causing lamella structure formation; second, the enhanced dynamic recovery of this pure aluminum through the movement of Y-type triple junction boundaries, resulting in grain coarsening; and third, the coarsening process eliminating the original few and small Brass and S lamellae and simultaneously enhancing the Cu and Dillamore orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–981. doi: 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
2. Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu YT (2006) Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58:33–39. doi: 10.1007/s11837-006-0213-710.1007/s11837-006-0213-7 ↗
3. Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials-development of the accumulative roll-bond (ARB) process. Acta Mater 47:579–58310.1016/S1359-6454(98)00365-6 ↗
4. Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Mater 39:1221–122710.1016/S1359-6462(98)00302-9 ↗
5. Prangnell PB, Bowen JR, Apps PJ (2004) Ultra-fine grain structures in aluminium alloys by severe deformation processing. Mater Sci Eng A 375–377:178–18510.1016/j.msea.2003.10.170 ↗
6. Kim HW, Kang SB, Tsuji N, Minamino Y (2005) Deformation textures of AA8011 aluminum alloy sheets severely deformed by accumulative roll bonding. Metall Mater Trans A 36A:3151–316310.1007/s11661-005-0086-3 ↗
7. Taylor GI (1938) Plastic strain in metals. J Inst Metals 62:307–324
8. Barlow CY, Nielsen P, Hansen N (2004) Multilayer roll bonded aluminium foil: processing, microstructure and flow stress. Acta Mater 52:3967–397210.1016/j.actamat.2004.05.012 ↗
9. Beyerlein IJ, Mara NA, Wang J, Carpenter JS, Zheng SJ, Han WZ, Zhang RF, Kang K, Nizolek T, Pollock TM (2012) Structure-property-functionality of bimetal interface. JOM 64:1192–1207. doi: 10.1007/s11837-012-0431-010.1007/s11837-012-0431-0 ↗
10. Hughes DA, Hansen N (1997) High angle boundaries formed by grain subdivision mechanisms. Acta Mater 45:3871–388610.1016/S1359-6454(97)00027-X ↗
11. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena. Elsevier, Oxford
12. Wagner P, Engler O, Lücke K (1995) Formation of Cu-type shear bands and their influence on deformation and texture of rolled f.c.c. {112} 〈111〉 single crystal. Acta Metall Mater 43:3799–381210.1016/0956-7151(95)90164-7 ↗
13. Hirsch J, Lücke K (1988) Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals-I. Description of rolling texture development in homogeneous Cu Zn alloys. Acta metall 36:2863–288210.1016/0001-6160(88)90172-1 ↗
14. Chowdhury SG, Srivastava VC, Ravikumar B, Soren S (2006) Evolution of texture during ARB and its comparison with normal cold rolled Al-Mg alloy. Scripta Mater 54:1691–169610.1016/j.scriptamat.2005.12.048 ↗
15. Toroghinejad MR, Ashrafizadeh F, Jamaati R, Hoseini M, Szpunar JA (2012) Textural evolution of nanostructured AA5083 produced by accumulative roll bonding. Mater Sci Eng A 556:351–35710.1016/j.msea.2012.06.098 ↗
16. Raei M, Toroghinejad MR, Jamaati R, Szpunar JA (2010) Effect of accumulative roll bonding process on textural evolution of AA1100 Al alloy. Mater Sci Eng A 527:7068–707310.1016/j.msea.2010.07.089 ↗
17. Jamaati R, Toroghinejad MR, Hoseini M, Szpunar JA (2011) Texture development in Al/Al2O3 MMCs produced by anodizing and ARB process. Mater Sci Eng A 528:3573–358010.1016/j.msea.2011.01.056 ↗
18. Evertsson J et al (2015) The thickness of native oxides on aluminum alloys and single crystals. Appl Sur Sci 349:826–83210.1016/j.apsusc.2015.05.043 ↗
19. Driver JH, Juul Jensen D, Hansen N (1994) Large strain deformation structures in aluminum crystals with rolling texture orientations. Acta Metall Mater 42:3105–311410.1016/0956-7151(94)90408-1 ↗
20. Godfrey A, Juul Jensen D, Hansen N (1998) Slip pattern, microstructure and local crystallography in aluminum single crystal of copper orientation {112}〈111〉. Acta Mater 46:835–84810.1016/S1359-6454(97)00316-9 ↗
21. Kamikawa N, Tsuji N, Huang X, Hansen N (2006) Quantification of annealed microstructures in accumulative roll bonding processed aluminum. Acta Mater 54:3055–306610.1016/j.actamat.2006.02.046 ↗
22. Kamikawa N, Tsuji N, Huang X, Hansen N (2007) Through-thickness characterization of microstructure and texture in high purity aluminum processed to high strain by accumulative roll-bonding. Mater Trans 48:1978–198510.2320/matertrans.MA200702 ↗
23. Zhang YB, Mishin OV, Godfrey A (2014) Analysis of through-thickness heterogeneities of microstructure and texture in nickel after accumulative roll bonding. J Mater Sci 49:287–293. doi: 10.1007/s10853-013-7703-010.1007/s10853-013-7703-0 ↗
24. Li S, Sun F, Li H (2010) Observation and modeling of the through-thickness texture gradient in commercial-purity aluminum sheets processed by accumulative roll-bonding. Acta Mater 58:1317–133110.1016/j.actamat.2009.10.036 ↗
25. Huang X, Tsuji N, Hansen N, Minamino Y (2003) Microstructural evolution during accumulative roll-bonding of commercial purity aluminum. Mater Sci Eng A 340:265–27110.1016/S0921-5093(02)00182-X ↗
26. Bay B, Hansen N, Hughes DA, Kuhlmann-Wilsdorf D (1992) Evolution of f.c.c. deformation structures in polyslip. Acta Metall Mater 40:205–21910.1016/0956-7151(92)90296-Q ↗
27. Bay B, Hansen N, Kuhlmann-Wilsdorf D (1992) Microstructural evolution in rolled aluminum. Mater Sci Eng A 158:139–14610.1016/0921-5093(92)90002-I ↗
28. Sun PL, Kao PW, Chang CP (2004) High angle boundary formation by grain subdivision in equal channel angular extrusion. Scripta Mater 51:565–57010.1016/j.scriptamat.2004.05.031 ↗
29. Kawasaki M, Horita Z, Langdon TG (2009) Microstructural evolution in high purity Al processed by equal channel angular pressing. Mater Sci Eng A 524:143–15010.1016/j.msea.2009.06.032 ↗
30. Mishin OV, Godfrey A, Juul Jensen D, Hansen N (2013) Recovery and recrystallization in commercial purity aluminum cold rolled to an ultrahigh strain. Acta Mater 61:5354–536410.1016/j.actamat.2013.05.024 ↗
31. Yu T, Hansen N, Huang X (2011) Recovery by triple junction motion in aluminum deformed to ultrahigh strains. Proc R Soc A 467:3039–306510.1098/rspa.2011.0097 ↗
32. Godfrey A, Liu Q (2009) Stored energy and structure in top-down processed nanostructure metals. Scripta Mater 60:1050–105510.1016/j.scriptamat.2009.02.014 ↗